DIN EN 175200:1996-11
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SECTIONAL SPECIFICATION - CIRCULAR CONNECTORS
12-01-2009
01-12-2013
1 Anwendungsbereich
2 Allgemeines
2.1 Bezugsschriftstücke
2.2 Begriffe
2.3 Einteilung in klimatische Klassen
2.4 Luft- und Kriechstrecken
2.5 Strombelastbarkeit
2.6 Kennzeichnung
2.7 Normbezeichnung für Steckverbinder
3 Allgemeine Anforderungen, Prüfungen und Prüfprogramme
3.1 Verarbeitung
3.2 Prüfen
3.3 Prüfprogramm (nur für die Bauartanerkennung
anzuwenden)
4 Erstellen von Bauartspezifikationen
4.1 Titel von Bauartspezifikationen
4.2 Zeichnungen
4.3 System der Massbuchstaben
4.4 Inhalt von Bauartspezifikationen
5 Qualitätsbewertungsverfahren
5.1 Primäre Stufe der Herstellung
5.2 Strukturell ähnliche Bauelemente
5.3 Stufensystem
5.4 Bildung von Prüflosen
5.5 Bauartanerkennungsverfahren für Bauelemente
5.6 Aufrechterhaltung der Anerkennung
5.7 Rücknahme oder zeitweiliger Entzug der
Bauartanerkennung
5.8 Wesentliche Änderungen
5.9 Qualitätskonformitätskontrolle
5.10 Prüfberichte
5.11 Lieferung geprüfter Steckverbinder
5.12 Lieferfreigabe vor Abschluss der Prüfungen
der Gruppe B
5.13 Verzögerte Lieferung
5.14 Prüfung im Fertigungsablauf
6 Erstellen von Bauartspezifikationen
Anhang A - System der Massbuchstaben
Anhang B - Zusätzliche Anforderungen an Prüfungen der
IEC
Anhang C - Zusätzliche Prüfverfahren
Anhang D - Zusätzliche Bauartanerkennungsverfahren
Covers ratings, testing and examination.
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Standards | Relationship |
| SN EN 175200 : 1996 | Identical |
| NEN EN 175200 : 1996 | Identical |
| BS EN 175200:1997 | Identical |
| EN 175200:1996 | Identical |
| I.S. EN 175200:1998 | Identical |
| UNE-EN 175200:1997 | Identical |
| CECC 75200 : 85 AMD 1 | Corresponds |
| DIN IEC 60068-2-21:1985-08 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES |
| DIN EN 60068-2-2 : 1995 | ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT |
| DIN EN 60317-1 : 95 AMD 1 97 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 1: POLYVINYL ACETAL ENAMELLED ROUND COPPER WIRE, CLASS 105 |
| DIN IEC 60068-2-3:1986-12 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST CA: DAMP HEAT, STEADY STATE |
| DIN 45901-9;CECC 00109:1975-09 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; RULE OF PROCEDURE 9, CERTIFIED TEST RECORDS |
| DIN IEC 60068-2-30:1986-09 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE) |
| DIN IEC 60068-2-20:1991-04 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST T: SOLDERING |
| DIN IEC 60050-101:1982-11 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY; MATHEMATICS |
| DIN IEC 60050-111-01:1983-10 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY; PHYSICS AND CHEMISTRY; PHYSICAL CONCEPTS |
| DIN ISO 2859-1:2014-08 | SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION (ISO 2859-1:1999 + COR. 1:2001 + AMD.1:2011) |
| DIN IEC 60050-826 : DRAFT 2001 | ERECTION OF LOW-VOLTAGE INSTALLATIONS - PART 200: DEFINITIONS |
| DIN IEC 60068-2-11:1982-08 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST KA: SALT MIST |
| DIN IEC 60068-2-14:1987-06 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST N: CHANGE OF TEMPERATURE |
| DIN EN 60068-2-6 : 1996 | ENVIRONMENTAL TESTING - PART 2-6: TESTS - TEST FC: VIBRATION (SINUSOIDAL) |
| DIN IEC 60050-482:2001-08 (Draft) | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 482: PRIMARY AND SECONDARY CELLS AND BATTERIES |
| DIN EN 60068-2-17:1995-05 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST Q: SEALING |
| DIN V 32831:1990-03 | GRAPHICAL SYMBOLS; PRINCIPLES FOR THE CREATION OF GRAPHICAL SYMBOLS FOR USE IN TECHNICAL PRODUCT DOCUMENTATION |
| DIN EN 100114-1:1996-11 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURE - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| DIN IEC 60050-121:1982-11 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY; CHAPTER 121: ELECTROMAGNETISM |
| DIN EN 60068-2-1 : 1995 | ENVIRONMENTAL TESTING - PART 2-1: TESTS - TEST A: COLD |
| DIN EN 60068-2-27 : 1995 | ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK |
| DIN EN 60068-1 : 2015 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE (IEC 60068-1:2013) |
| DIN IEC 60050-902:1978-09 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY; RADIO INTERFERENCE |
| DIN IEC 60050-111-03:1982-02 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY; PHYSICS AND CHEMISTRY; CONCEPTS RELATED TO QUANTITIES AND UNITS |
| DIN EN 60068-2-7:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST GA AND GUIDANCE: ACCELERATION, STEADY STATE |
| DIN IEC 60050-151:1983-12 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 151: ELECTRICAL AND MAGNETIC DEVICES |
| DIN EN 60068-2-29:1995-03 | BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS; TEST EB AND GUIDANCE: BUMP |
| DIN IEC 60050-131:1983-01 | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 131: ELECTRIC AND MAGNETIC CIRCUITS |
| DIN IEC 60050-521:2000-02 (Draft) | INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 521: SEMICONDUCTOR DEVICES AND INTEGRATED CIRCUITS |
| DIN EN 60617-13:1994-01 | GRAPHICAL SYMBOLS FOR DIAGRAMS - PART 13: ANALOGUE ELEMENTS |
| DIN IEC 60068-2-13:1985-08 | ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST M: LOW AIR PRESSURE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.