DIN EN 1561:2012-01
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Founding - Grey cast irons; German version EN 1561:2011
Available format(s)
Hardcopy , PDF
Superseded date
03-01-2024
Superseded by
Language(s)
German, English
Published date
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes DIN 1691, DIN 1691 SUPP 1 and DIN 50109 (07/2002) The 2020 draft version has released for standard DIN EN 1561
|
| DocumentType |
Standard
|
| Pages |
35
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN 1561:2011 | Identical |
| EN 1561:2011 | Identical |
| UNE-EN 1561:2012 | Identical |
| SN EN 1561 : 2012 | Identical |
| BS EN 1561:2011 | Identical |
| NF EN 1561 : 2011 | Identical |
| NBN EN 1561 : 2011 | Identical |
| NEN EN 1561 : 2011 | Identical |
| NS EN 1561 : 2011 | Identical |
| UNI EN 1561 : 2011 | Identical |
| ONORM EN 1561 : 2011 | Identical |
| DIN 738:2011-06 | ROLLING BEARINGS - PLUMMER BLOCK HOUSINGS FOR ROLLING BEARINGS OF DIAMETER SERIES 2 WITH CYLINDRICAL BORE |
| DIN 506:2004-09 | DRIVING COMPONENTS - CAP-BEARINGS, HALF BEARINGS - FASTENING WITH FOUR SCREWS |
| DIN 3220:2002-04 | Hand-wheels, flat type - Hub hole with tapered square |
| DIN HDBK 454 : 1999 | GUENSTIG IM PAKET: GIESSEREIWESEN TEILE 1, 2 UND 3 - STAHLGUSS UND GUSSEISEN |
| DIN 1212-2:2003-05 | STEP IRONS WITH UPSTAND FOR STAGGERED MANHOLE STEPS - PART 2: STEP IRONS TO BE SET INTO PREFABRICATED CONCRETE UNITS |
| DIN 16962-12:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYPROPYLENE (PP) FOR PIPES UNDER PRESSURE, PP-H 100, PP-B 80 AND PP-R 80 - PART 12: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING; DIMENSIONS |
| DIN HDBK 454/3 : 1ED 2014 | GIESSEREIWESEN 3 - STAHLGUSS UND GUSSEISEN - WERKSTOFFE, SCHWEISSEN, ZUBEHOER |
| DIN 504:2004-09 | DRIVING COMPONENTS - EYE-TYPE BEARINGS |
| DIN 505:2004-09 | DRIVING COMPONENTS - CAP BEARINGS, HALF BEARINGS - FASTENING WITH TWO SCREWS |
| DIN 86552:2002-04 | VALVES, SCREWED BONNET TYPE OF STEEL FOR 24-DEGREE CONNECTION WITH PORT END W ACCORDING TO DIN 3861 |
| DIN 736:2011-06 | ROLLING BEARINGS - PLUMMER BLOCK HOUSINGS FOR ROLLING BEARINGS OF DIAMETER SERIES 2 WITH TAPERED BORE AND ADAPTER SLEEVE |
| DIN 87346:2016-05 (Draft) | REMOTE HANDLING TUBES FOR MANUAL OPERATION - BEARINGS |
| DIN 1239:1999-02 | COVERINGS FOR WELLS, SPRING WATER CHAMBERS AND OTHER WATER SUPPLY CONSTRUCTION - PRINCIPLES FOR CONSTRUCTION |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| VDI 3381:2012-01 | Polysterene foam patterns - Design instructions for cast iron and cast steel dies |
| DIN 503:2004-09 | Driving components - Flange bearings - Fastened with four screws |
| DIN 19583-2:2012-10 | GULLY TOPS 500 X 500 FOR ROAD GULLIES, CLASS C 250 AND CLASS D 400 - PART 2: PARTICULARS |
| DIN 1056:2009-01 | SOLID CONSTRUCTION, FREE-STANDING CHIMNEYS - BRICK LINERS - CALCULATION AND DESIGN |
| DIN 6336:2008-05 | STAR GRIPS |
| DIN 737:2011-06 | ROLLING BEARINGS - PLUMMER BLOCK HOUSINGS FOR ROLLING BEARINGS OF DIAMETER SERIES 3 WITH TAPERED BORE AND ADAPTER SLEEVE |
| DIN 739:2011-06 | ROLLING BEARINGS - PLUMMER BLOCK HOUSINGS FOR ROLLING BEARINGS OF DIAMETER SERIES 3 WITH CYLINDRICAL BORE |
| DIN 1211-1:2003-05 | STEP IRONS FOR STAGGERED MANHOLE STEPS - PART 1: STEP IRONS TO BE FITTED IN MASONRY OR SET INTO CONCRETE |
| DIN 390:2002-04 | Hand-wheels, dished - Hub hole with straight square |
| DIN 16963-11:1999-10 | PIPE JOINTS AND COMPONENTS OF POLYETHYLENE (PE) FOR PIPES UNDER PRESSURE, PE 80 AND PE 100 - PART 11: FLANGE ADAPTERS, FLANGES, SEALING RINGS FOR SOCKET WELDING - DIMENSIONS |
| DIN 86501:2016-02 (Draft) | SCREWED BONNET TYPE VALVES, OF GUN METAL WITH 24 DEGREES CONNECTION FOR TYPE W PORT ACCORDING TO DIN 3861 |
| DIN HDBK 205 : 5ED 2006 | MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 3 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMABHAENGIG); SCHWEISSVERBINDUNGEN, METALLKLEBUNGEN |
| DIN 86211:2011-02 | Fire valves for PN 16 with fire hose couplings Type C or Type B and with flange connection |
| DIN 87349:2016-05 (Draft) | REMOTE HANDLING TUBES FOR MANUAL OPERATION - BEVEL GEAR UNITS |
| BWB TL 3418-0002 : 4ED 2002 | HORIZONTAL JOLT MACHINE, STROKE 300 MM |
| DIN 81249-2:2013-05 | CORROSION OF METALS IN SEA WATER AND SEA ATMOSPHERE - PART 2: FREE CORROSION IN SEA WATER |
| DIN 3230-5:2014-11 | TECHNICAL CONDITIONS OF DELIVERY OF VALVES - VALVES FOR GAS INSTALLATIONS AND GAS PIPELINES - PART 5: REQUIREMENTS AND TESTS |
| DIN 1212-1:2003-05 | STEP IRONS WITH UPSTAND FOR STAGGERED MANHOLE STEPS - PART 1: STEP IRONS TO BE FITTED IN MASONRY OR SET INTO CONCRETE |
| DIN 1211-2:2003-05 | STEP IRONS FOR STAGGERED MANHOLE STEPS - PART 2: STEP IRONS TO BE SET INTO PREFABRICATED CONCRETE UNITS |
| DIN 3319:2002-04 | Hand-wheels, dished - Hub hole with tapered square |
| DIN 502:2004-09 | Driving Components - Flange bearings - Fastened with two screws |
| DIN 42552:2009-08 | TRANSFORMERS - OIL LEVEL INDICATOR WITH SCREWPLUG |
| NBR 15321-1 : 2017 | METALLIC HOUSEHOLD APPLIANCES - NON-STICK COATING - PART 1: SECURITY |
| VDG P 340 : 2009 | WEDGE PENETRATION TEST - GREY CAST IRON AND COMPACTED GRAPHITE CAST IRON |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 1370:2011 | Founding - Examination of surface condition |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 185:2005 | Grey cast irons Classification |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO/TR 15931:2004 | Designation system for cast irons and pig irons |
| ISO 945-1:2008 | Microstructure of cast irons Part 1: Graphite classification by visual analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.