DIN EN 15243:2007-10
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
VENTILATION FOR BUILDINGS - CALCULATION OF ROOM TEMPERATURES AND OF LOAD AND ENERGY FOR BUILDINGS WITH ROOM CONDITIONING SYSTEMS
Hardcopy , PDF
11-01-2017
English
01-01-2007
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole und Abkürzungen
5 Allgemeiner Ansatz
6 Berechnung der Raumtemperatur bei
Räumen ohne Klimaanlage
6.1 Auswahl der Räume
6.2 Berechnungsverfahren
6.3 Randbedingungen
7 Berechnung der Raumkühllast
7.1 Berechnung der sensiblen Grundraumkühllast
7.2 Anlagenabhängige Berechnung der
sensiblen Grundraumkühllast
7.3 Berechnung der latenten Raumkühllast
7.4 Randbedingungen
8 Berechnung der Raumheizlast
8.1 Berechnungsverfahren
8.2 Klimadaten
8.3 Lüftungsraten
9 Dimensionierung der in die betreffenden Räume
einzubauenden Betriebsanlage
10 Zonenlastberechnung
11 Berechnung der Anlagenheiz- und -kühllast
12 Dimensionierung der zentralen Betriebsanlage
13 Berechnung des Raum- und Gebäudeenergiebedarfs
13.1 Allgemeines
13.2 Energiebedarf für Be- und Entfeuchtung
13.3 Beziehung zu Verfahren der Berechnung des
Anlagenenergiebedarfs
14 Berechnung des Anlagenenergiebedarfs
14.1 Allgemeiner Ansatz
14.2 Geforderte Zweckmässigkeit von detaillierten
und vereinfachten Berechnungsverfahren
14.3 Vereinfachte Verfahren zur Berechnung der
Anlagenverluste und des Energiebedarfs
14.4 Detailliertes Verfahren zur Berechnung der
Anlagenverluste und des Energiebedarfs
Anhang A (informativ) Bestes Verfahren für den
Bemessungsprozess
Anhang B (informativ) Vorschlag für ein Verfahren
zur Auswahl typischer Räume für die
Temperaturberechnung
Anhang C (informativ) Anlagenüberblick
Anhang D (informativ) Schematische Beziehung
zwischen den Verfahren zur Berechnung des
Energiebedarfs von RLT-Anlagen und Gebäuden
sowie zwischen Eingangs- und Ausgabewerten
Anhang E (informativ) Beispiel für vereinfachte
Verfahren zur Anlagenverlust- und
Energiebedarfsberechnung
E.1 Beispiel 1 (niederländischer Vorschlag)
E.2 Beispiel 2 (deutscher Vorschlag)
E.3 Beispiel 3: Berechnung des
Monatskühlenergieverbrauchs
von RLT-Anlagen mit Hilfe von
Gradtagverfahren
Anhang F (informativ) EDR-Überprüfung von Gebäude-
und Systemberechnungsverfahren
F.1 Einleitung
F.2 Verfahrensbeschreibung
F.3 EDR-Verfahren zur Berechnung von
Referenzwerten
Anhang G (informativ) Beispielwerte für
Emissionsverluste
G.1 Zonen, die mehrere Gruppen umfassen
G.2 Regelgenauigkeit
Anhang H (informativ) Berechnung des latenten
Energiebedarfs
H.1 Darstellung
H.2 Anwendung für Stundenberechnung
Anhang I (informativ) Beispielberechnung der
Heiz-/Kühlperiodeneffizienz der Kälteerzeuger
und Kühler in Klimaanlagen
I.1 Einleitung
I.2 Theorie
I.3 Praktische Anwendung
I.4 Beispiel zur Erläuterung der Abschätzung
des Heiz-/Kühlperioden-EER
I.5 Beispiel für berechnete Teillastwerte
Anhang J (informativ) Hilfsenergie für Kühlwasser- und
Kaltwasserverteilung
J.1 Aufwand an elektrischer Energie
J.2 Hydraulischer Energiebedarf der Verteilung
J.3 Aufwandszahlen
J.4 Sonstige Hilfsenergien (Nebenantriebe)
J.5 Leitfaden zur Berechnung des elektrischen
Energieaufwands der Kühl- und
Kaltwasserverteilung
Anhang K (informativ) Verluste der Wärme- und
Entfeuchtungsverteilung in Kühlanlagen
K.1 Kühlung für die RLT-Anlage
K.2 Kühlenergieversorgung für die
Gebäudekühlung
Anhang L (informativ) Nutzung von Hilfsenergie durch
Endgeräte
L.1 Energiebedarf für die Gebäudekühlung -
Ventilatoren
Anhang M (informativ) Hilfsenergiebedarf, Wärmeabfuhr
M.1 Berechnung
M.2 Teillast-Kennwerte von Wärmeabfuhrsystemen
Literaturhinweise
This standard is included in DIN Handbook 217-2.
DocumentType |
Standard
|
Pages |
161
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
EN 15243:2007 | Identical |
DIN EN 15241:2011-06 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR ENERGY LOSSES DUE TO VENTILATION AND INFILTRATION IN BUILDINGS |
DIN HDBK 217-2 : 2ED 2013 | RAUMLUFTTECHNIK 2 - GRUNDLAGENNORMEN FUER DIE ENERGETISCHE BEWERTUNG, INSPEKTION |
EN ISO 13792:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - Simplified methods (ISO 13792:2012) |
DIN V 18599-9:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 9: FINAL AND PRIMARY ENERGY DEMAND OF POWER GENERATION PLANTS |
DIN V 18599-6:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 6: FINAL ENERGY DEMAND OF VENTILATION SYSTEMS AND AIR HEATING SYSTEMS FOR RESIDENTIAL BUILDINGS |
EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
EN ISO 15927-4:2005 | Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 4: Hourly data for assessing the annual energy use for heating and cooling (ISO 15927-4:2005) |
ISO 13792:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling Simplified methods |
DIN V 18599-4:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 4: NET AND FINAL ENERGY DEMAND FOR LIGHTING |
DIN V 18599-2:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 2: NET ENERGY DEMAND FOR HEATING AND COOLING OF BUILDING ZONES |
EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
ISO 9346:2007 | Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary |
ISO 15927-4:2005 | Hygrothermal performance of buildings — Calculation and presentation of climatic data — Part 4: Hourly data for assessing the annual energy use for heating and cooling |
DIN V 18599-3:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 3: NET ENERGY DEMAND FOR AIR CONDITIONING |
DIN V 18599-5:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 5: FINAL ENERGY DEMAND OF HEATING SYSTEMS |
EN 15377-3:2007 | Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources |
EN 12792:2003 | Ventilation for buildings - Symbols, terminology and graphical symbols |
EN 15265:2007 | Energy performance of buildings - Calculation of energy needs for space heating and cooling using dynamic methods - General criteria and validation procedures |
DIN V 18599-7:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 7: FINAL ENERGY DEMAND OF AIR-HANDLING AND AIR-CONDITIONING SYSTEMS FOR NON-RESIDENTIAL BUILDINGS |
UNI 10963 : 2001 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS - PERFORMANCE TESTS AT PART LOAD |
EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
EN 832:1998/AC:2002 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR HEATING - RESIDENTIAL BUILDINGS |
DIN V 18599-8:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 8: NET AND FINAL ENERGY DEMAND OF DOMESTIC HOT WATER SYSTEMS |
EN 15316-2-1:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems |
ISO 9288:1989 | Thermal insulation — Heat transfer by radiation — Physical quantities and definitions |
EN ISO 13791:2012 | Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012) |
PREN ISO 13790 : DRAFT 1999 | THERMAL PERFORMANCE OF BUILDINGS - CALCULATION OF ENERGY USE FOR HEATING |
VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
CEN/TS 14825 : 2003 | AIR CONDITIONERS, LIQUID CHILLING PACKAGES AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - TESTING AND RATING AT PART LOAD CONDITIONS |
ISO 13791:2012 | Thermal performance of buildings Calculation of internal temperatures of a room in summer without mechanical cooling General criteria and validation procedures |
EN 15255:2007 | Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures |
EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
IEC 60675:1994+AMD1:1998 CSV | Household electric direct-acting room heaters - Methods for measuring performance |
DIN V 18599-1:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 1: GENERAL BALANCING PROCEDURES, TERMS AND DEFINITIONS, ZONING AND EVALUATION OF ENERGY SOURCES |
DIN V 18599-10:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 10: BOUNDARY CONDITIONS OF USE, CLIMATIC DATA |
EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
EN 15026:2007 | Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation |
ISO 9251:1987 | Thermal insulation Heat transfer conditions and properties of materials Vocabulary |
EN 12831:2003 | Heating systems in buildings - Method for calculation of the design heat load |
EN 60675:1995/A1:1998 | HOUSEHOLD ELECTRIC DIRECT-ACTING ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE |
EN 15316-2-3:2007 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.