DIN EN 15162:2008-10
Current
The latest, up-to-date edition.
MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
Hardcopy , PDF
English
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Liste der signifikanten Gefährdungen
5 Sicherheitsanforderungen und/oder Schutzmassnahmen
5.1 Allgemeines
5.2 Schutz gegen mechanische Gefährdungen
5.2.1 Feststellen des Wagens
5.2.2 Endschalter am Sägeblatt-Rahmen
5.2.3 Gefahr des Riemenbruchs
5.2.4 Schutzeinrichtungen um Motor- und
Schwungrad-Bereich
5.2.5 Vorrichtung zum Halten der Platten
5.2.6 Maschinenzugang
5.2.7 Anheben und Absenken der Sägeblatt-Rahmens
und Schlittens
5.2.8 Pumpenraum für Gattersäge
5.2.9 System zur Verteilung und Sammlung des
(Schleif-)Schlamms
5.3 Elektrische Ausrüstung und Energiezufuhr
5.3.1 Allgemeines
5.3.2 Steuerkonsole
5.3.3 Anlaufen und Betriebswahlschalter
5.3.4 Startprozeduren und -sequenz
5.3.5 NOT-AUS
5.3.6 Sicherheitsbezogene Teile der Steuerungssysteme
5.3.7 Störung/Ausfall der Energieversorgung
5.3.8 Motor und Motorgehäuse
5.3.9 Sicherheitsanforderungen in Bezug auf
elektromagnetische Störungen
5.3.10 Abschalteinrichtungen
5.4 Hydraulische und pneumatische Bauteile
5.5 Ergonomische Aspekte
6 Feststellung der Übereinstimmung mit den Sicherheitsanforderungen
und/oder Schutzmassnahmen
7 Benutzerinformationen
7.1 Allgemeines
7.2 Signale und Warneinrichtungen
7.3 Bedienungsanleitung
7.3.1 Allgemeines
7.3.2 Beschreibung der Maschine
7.3.3 Anweisungen für Transport, Handhabung und Lagerung
der Maschine und ihre abnehmbaren Teile
7.3.4 Anweisungen zur Installation und zum Gebrauch der
Maschine
7.3.5 Wartungsanleitung
7.3.6 Ersatzteilliste
7.4 Kennzeichnung
Anhang ZA (informativ) - Zusammenhang zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen
der EG-Richtlinie 98/37/EG
Anhang ZB (informativ) - Zusammenhang zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen
der EG-Richtlinie 2006/42/EG
Literaturhinweise
Bilder
Tabellen
Applicable to monoblade or multiblade gang saws, as defined in 3.1, for cutting marble, granite, other types of natural stone, artificial or natural conglomerates and similar materials.
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 15162:2008 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 61496-1:2013/AC:2015 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.