DIN EN 14868:2005-11
Current
Current
The latest, up-to-date edition.
PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2005
US$132.90
Excluding Tax where applicable
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Types of corrosion
6 Role of oxygen
7 Microbial corrosion
8 Corrosion damage in Case I conditions
9 Corrosion damages in Case II systems
10 Corrosion protection methods
Annex A (informative) Important corrosion reactions
in the systems under consideration
Bibliography
This standard is included in DIN Handbook 219. Gives a review of influencing factors on the corrosion likelihood of metallic components (pipes, tanks, vessels, heat exchangers, pumps etc.) in water circulation systems in buildings.
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 14868:2005 | Identical |
| EN 14868:2005 | Identical |
| NS EN 14868 : 1ED 2005 | Identical |
| NEN EN 14868 : 2005 | Identical |
| NF EN 14868 : 2005 | Identical |
| NBN EN 14868 : 2005 | Identical |
| I.S. EN 14868:2005 | Identical |
| UNE-EN 14868:2006 | Identical |
| DIN HDBK 219 : 5ED 2015 | KORROSION UND KORROSIONSSCHUTZ - BEURTEILUNG, PRUEFUNG, SCHUTZMASSNAHMEN |
| VDI 2036:2009-11 | Building installations for discrict heating |
| VDI 2035 Blatt 2:2009-08 | Prevention of damage in water heating installations - Water-side corrosion |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| EN 12502-1:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General |
| EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003) |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| ISO 15877-3:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 3: Fittings |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 12502-4:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| EN 12502-3:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 5: Fitness for purpose of the system |
| ISO 15877-2:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes |
| ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes |
| EN ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 9454-1:2016 | Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling and packaging |
| EN 12502-5:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| ISO 15877-1:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 1: General |
| ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| EN 12502-2:2004 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys |
| ISO 15877-5:2009 | Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| EN ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003) |
| EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| EN 29454-1:1993 | Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:1990) |
| ISO 8044:2015 | Corrosion of metals and alloys — Basic terms and definitions |
| ISO 6509:1981 | Corrosion of metals and alloys — Determination of dezincification resistance of brass |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 1: General |
| ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 3: Fittings |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| ISO 15876-5:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.