DIN EN 14792:2006-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE
Hardcopy , PDF
03-07-2021
English
01-01-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Description of the measuring system
7 Performance characteristics of the SRM
8 Suitability of the measuring system to
the measurement task
9 Field operation
11 Expression of results
12 Equivalence of an alternative method
13 Measurement report
Annex A (informative) - Validation of the
method in the field
Annex B (informative) - Sampling and conditioning
configurations
Annex C (normative) - Determination of conversion
efficiency
Annex D (informative) - Examples of different types
of converters
Annex E (informative) - Calculation of the uncertainty
associated with a concentration expressed for dry
gas and at an oxygen reference concentration
Annex F (informative) - Example of assessment of
compliance of chemiluminescence method for
NO[x] with - requirements on emission measurements
Annex G (informative) - Example of correction of
data from drift effect
Annex H (informative) - Significant technical changes
Bibliography
Defines the standard reference method (SRM) based on the chemiluminescence principle for the determination of the nitrogen oxides (NO[x]) in flue gases emitted to the atmosphere from ducts and stacks.
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| UNI EN 14792 : 2006 | Identical |
| UNE-EN 14792:2017 | Identical |
| NF EN 14792 : 2017 | Identical |
| I.S. EN 14792:2017 | Identical |
| SN EN 14792 : 2017 | Identical |
| EN 14792:2017 | Identical |
| NBN EN 14792 : 2006 | Identical |
| NS EN 14792 : 2017 | Identical |
| BS EN 14792:2005 | Identical |
| NEN EN 14792 : 2017 | Identical |
| BS EN 14792:2017 | Identical |
| PREN 14792 : DRAFT 2014 | Identical |
| VDI 3890:2016-03 | Emission control - Pet cremation facilities |
| VDI 3461:2016-09 (Draft) | Emission control - Thermochemical gasification of biomass in cogeneration |
| VDI 3460 Blatt 1:2014-02 | Emission control - Thermal waste treatment - Fundamentals |
| VDI 3469 Blatt 6:2008-01 | Emission control - Production and processing of fibrous materials - Mineral wool insulating materials |
| VDI 3462 Blatt 6:2009-03 | Emission control - Wood machining and processing - Facility-specific measuring instructions |
| VDI 3476 Blatt 1:2015-06 | Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals |
| VDI 3469 Blatt 4:2008-11 | Emission control - Production and processing of fi-brous materials - Friction linings |
| VDI 2441:2016-05 | Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation |
| VDI 3899 Blatt 1:2016-05 | Emission control - Landfill gas - Utilisation and treatment of landfill gas |
| VDI 2293:2011-09 | Emission control - Coal preparation plants including driers |
| VDI 2447:2011-04 | Emission control - Plants to the production and processing of acrylonitrile (AN) |
| VDI 3896:2015-10 | Emission control - Preparation of biogas to natural gas quality |
| VDI 2576:2010-01 | Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal |
| VDI 3892:2015-03 | Emission control - Roasted-coffee-producing industry - Plants with a minimum daily output of at least 0,5 tonnes |
| VDI 2578:2017-05 | Emission control - Glassworks |
| VDI 2095 Blatt 1:2011-03 | Emission control - Treatment of mineral construction-site and demolition waste - Stationary and mobile demolition waste recycling facilities |
| VDI 2102 Blatt 1:2007-04 (Draft) | Emission control - Secondary copper smelting and refining plants |
| VDI 3455:2013-08 | Emission control - High-volume car body painting plants |
| VDI 3898:2013-01 | Emission control - Plants for dry mechanical, physio-chemical, thermal and biological soil treatment |
| VDI 2594:2015-09 | Emission control - Pulp production in the sugar industry |
| VDI 2102 Blatt 2:2013-04 | Emission control - Copper and copper alloy melting plants |
| VDI 3475 Blatt 5:2015-10 | Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment |
| VDI 3454 Blatt 2:2012-04 | Emission control - Claus units - Emission measurement |
| VDI 3476 Blatt 2:2010-01 | Waste gas cleaning - Catalytic waste gas cleaning methods - Oxidative processes |
| DIN EN 13725:2003-07 | Air quality - Determination of odour concentration by dynamic olfactometry |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| ISO 14956:2002 | Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| EN 15259:2007 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| EN ISO 14956:2002 | Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
| EN 15267-4:2017 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.