DIN EN 14198:2015-01 (Draft)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES
Available format(s)
Hardcopy , PDF
Superseded date
03-07-2021
Language(s)
German
Published date
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
European foreword
1 Scope
2 Normative References
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements
6 Performances
Annex A (normative) - Vehicle requirements
Annex B (informative) - Train related brake performance categories
Annex C (informative) - Explanation of 'proven design' concept
Annex D (informative) - Corresponding standards EN - UIC
Annex E (normative) - Brake pipe pressure control system
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
2008/57/EC
Bibliography
Defines basic requirements for the braking of trains hauled by locomotives: - For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system. - For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary.
| DevelopmentNote |
DRAFT AMD 1 issued in May 2017. (05/2017)
|
| DocumentType |
Draft
|
| Pages |
75
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NF EN 14198 : 2017 | Identical |
| SN EN 14198:2017 | Identical |
| NS EN 14198 : 2004 | Identical |
| I.S. EN 14198:2016 | Identical |
| NBN EN 14198 : 2005 | Identical |
| BS EN 14198 : 2016 | Identical |
| UNE-EN 14198:2005 | Identical |
| EN 14198:2016 | Identical |
| UNI EN 14198 : 2005 | Identical |
| NEN EN 14198 : 2016 | Identical |
| ONORM EN 14198 : 2017 | Identical |
| EN 854:2015 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| EN 15595:2009+A1:2011 | Railway applications - Braking - Wheel slide protection |
| EN 15611:2008+A1:2010 | Railway applications - Braking - Relay valves |
| EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
| EN 15612:2008+A1:2010 | Railway applications - Braking - Brake pipe accelerator valve |
| EN 15624:2008+A1:2010 | Railway applications - Braking - Empty-loaded changeover devices |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| UIC 541-5 : 4ED 2005 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) - ELECTROPNEUMATIC EMERGENCY BRAKE OVERRIDE (EBO) |
| NFF 11 100 : 1995 | RAILWAY ROLLING STOCK - QUALITY OF COMPRESSED AIR FOR PNEUMATIC APPARATUSES AND CIRCUITS USE |
| EN 16185-2:2014 | Railway applications - Braking systems of multiple unit trains - Part 2: Test methods |
| EN 15877-1:2012 | Railway applications - Marking on railway vehicles - Part 1: Freight wagons |
| EN 14535-2:2011 | Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements |
| EN 286-3:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| EN 15877-2:2013 | Railway applications - Markings of railway vehicles - Part 2: External markings on coaches, motive power units, locomotives and on track machines |
| EN 15220:2016 | Railway applications - Brake indicators |
| UIC 541-4 : 4ED 2010 | BRAKES - BRAKES WITH COMPOSITION BRAKE BLOCKS - GENERAL CONDITIONS FOR CERTIFICATION OF COMPOSITE BRAKE BLOCKS |
| EN 14535-1:2005+A1:2011 | Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
| UIC 547 : 4ED 1989 | BRAKES - AIR BRAKE - STANDARD PROGRAMME OF TESTS |
| UIC 541-3 : 8ED 2017 | BRAKES - DISC BRAKES AND THEIR APPLICATION - GENERAL CONDITIONS FOR THE APPROVAL OF BRAKE PADS |
| EN 15329:2015 | Railway applications - Braking - Brake block holder and brake shoe key for railway vehicles |
| EN 15273-2:2013+A1:2016 | Railway applications - Gauges - Part 2: Rolling stock gauge |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EN 50553 : 2012 AMD 1 2016 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| UIC 541-07 : 1ED 1992 | BRAKES - REGULATIONS GOVERNING THE CONSTRUCTION OF DIFFERENT TYPES OF BRAKING GEAR - SIMPLE PRESSURE RECEPTACLES OF STEEL, NOT FIRED, FOR AIR BRAKING EQUIPMENT AND AUXILIARY PNEUMATIC EQUIPMENT FOR RAILWAY ROLLING STOCK |
| ISO 8573-1:2010 | Compressed air Part 1: Contaminants and purity classes |
| EN 15807:2011 | Railway applications - Pneumatic half couplings |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| PREN 16834 : DRAFT 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PERFORMANCE |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 14531-2:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 2: Step by step calculations for train sets or single vehicles |
| EN 16452:2015 | Railway applications - Braking - Brake blocks |
| EN 14601:2005+A1:2010 | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
| EN 286-4:1994 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| UIC 541-6 : 1ED 2010 | BRAKES - ELECTROPNEUMATIC BRAKE (EP BRAKE) AND PASSENGER ALARM SIGNAL (PAS) FOR VEHICLES USED IN HAULED CONSISTS |
| UIC 541-03 : 2ED 2015 | BRAKES - SPECIFICATIONS FOR THE CONSTRUCTION OF VARIOUS BRAKE PARTS - DRIVER'S BRAKE VALVE / DRIVER'S BRAKE CONTROLLER |
| UIC 545 : 10ED 2014 | BRAKES - INSCRIPTIONS, MARKS AND SIGNS |
| UIC 541-04 : 4ED 2014 | BRAKES - REGULATIONS CONCERNING THE MANUFACTURE OF BRAKE COMPONENTS - SELF-ADJUSTING LOAD-PROPORTIONAL BRAKING SYSTEM AND AUTOMATIC 'EMPTY-LOADED' CONTROL DEVICE |
| UIC 540 : 6ED 2014 | BRAKES - AIR BRAKES FOR FREIGHT TRAINS AND PASSENGER TRAINS |
| EN 14535-3:2015 | Railway applications - Brake discs for railway rolling stock - Part 3: Brake discs, performance of the disc and the friction couple, classification |
| EN 16334:2014 | Railway applications - Passenger Alarm System - System requirements |
| EN 14033-1:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 1: Technical requirements for running |
| UIC 542 : 7ED 2015 | BRAKE PARTS - INTERCHANGEABILITY |
| CEN/TR 16251:2016 | Railway applications - Environmental conditions - Design guidance for rolling stock |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| UIC 541-06 : 2ED 2013 | BRAKES - REGULATIONS CONCERNING THE CONSTRUCTION OF THE VARIOUS BRAKE COMPONENTS: MAGNETIC BRAKES |
| EN 16207:2014 | Railway applications - Braking - Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock |
| EN 15663:2017 | Railway applications - Vehicle reference masses |
| EN 15625:2008+A1:2010 | Railway applications - Braking - Automatic variable load sensing devices |
| PREN 16186-2 : DRAFT 2015 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| EN 16241:2014+A1:2016 | Railway applications - Slack adjuster |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| UIC 535-3 : 1976 REPRINT 1995 | EQUIPPING OF WAGONS WITH DEVICES FOR PASSING FROM ONE TO THE OTHER AND WITH SCREW BRAKES |
| EN 13749:2011 | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
| UIC 541-1 : 8ED 2013 | BRAKES - REGULATIONS CONCERNING THE DESIGN OF BRAKE COMPONENTS |
| UIC 541-05 : 3ED 2016 | BRAKES - MANUFACTURING SPECIFICATIONS FOR VARIOUS BRAKE PARTS - WHEEL SLIDE PROTECTION DEVICE (WSP) |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| EN 15355:2008+A1:2010 | Railway applications - Braking - Distributor valves and distributor-isolating devices |
| EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| UIC 544-1 : 6ED 2014 | BRAKES - BRAKING PERFORMANCE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.