DIN EN 13969:2007-03
Current
The latest, up-to-date edition.
FLEXIBLE SHEETS FOR WATERPROOFING - BITUMEN DAMP PROOF SHEETS INCLUDING BITUMEN BASEMENT TANKING SHEETS - DEFINITIONS AND CHARACTERISTICS
Hardcopy , PDF
English
01-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
5.6 Widerstand gegen Stossbelastung
6.3.2 Prüfhäufigkeit
Anhang B (informativ) Beispiel für ein
Produktdatenblatt
ZA.3 CE-Kennzeichnung und Etikettierung
This standard is included in DIN Handbook 129-2. Describes definitions and characteristics of flexible reinforced bitumen sheets for which the intended use is as damp proofing for buildings, including basement tanking. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this standard.
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 13969 : 2005 AMD 1 2006 | Identical |
| I.S. EN 13969:2005 | Identical |
| NBN EN 13969 : 2005 AMD 1 2007 | Identical |
| SN EN 13969 : 2004 AMD 1 2006 | Identical |
| UNI EN 13969 : 2007 | Identical |
| BS EN 13969:2004 | Identical |
| UNE-EN 13969:2005 | Identical |
| NF EN 13969 : 2005 AMD 1 2007 | Identical |
| NEN EN 13969 : 2004 AMD 1 2007 | Identical |
| DIN HDBK 129 : 12ED 2015 | |
| DIN 18195-2:2009-04 | WATER-PROOFING OF BUILDINGS - PART 2: MATERIALS |
| DIN 18195-4:2011-12 | WATER-PROOFING OF BUILDINGS - PART 4: WATERPROOFING AGAINST GROUND MOISTURE (CAPILLARY WATER, RETAINED WATER) AND NON-ACCUMULATING SEEPAGE WATER UNDER FLOOR SLABS ON WALLS, DESIGN AND EXECUTION |
| DIN EN 1996-2/NA:2012-01 | NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| DIN HDBK 129-2 : 2017 | |
| DIN EN 1996-1-1/NA:2012-01 | NATIONAL ANNEX - NATIONALLY DETERMINED PARAMETERS - EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| EN 1848-1:1999 | Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing |
| EN 1850-1:1999 | Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 1928:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness |
| EN 12311-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
| EN 12310-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) |
| EN 1109:2013 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12316-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints |
| EN 1296:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature |
| EN 1847:2009 | Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12730:2015 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading |
| EN 1849-1:1999 | Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing |
| EN 13416:2001 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling |
| EN 12317-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.