DIN EN 13964:2014-08
Current
The latest, up-to-date edition.
SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
German
08-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Loading capacity of substructures
components - Test methods
6 Evaluation of conformity
7 Marking, labelling and packaging
8 Technical documentation
Annex A (informative) - Guidance for installation
Annex B (informative) - Selection of top fixing and
perimeter trim fixing
Annex C (informative) - Wind load resistance
Annex D (normative) - Impact resistance
Annex E (normative) - Formaldehyde classes and
associated test methods
Annex F (normative) - Membrane components -
Flexural tensile strength test
Annex G (normative) - Suspension component -
Functional test
Annex H (normative) - Perimeter trim component-
Functional test, determination of load
bearing capacity
Annex I (normative) - Reaction to fire test - Mounting
and fixing
Annex J (normative) - Mechanical strength, safety
against failure - baffles
Annex K (informative) - Reaction to fire
performance - Classified without the need
for further testing (CWFT)
Annex L (informative) - Guidance on the choice
of attestation of conformity system
Annex M (informative) - Significant technical
changes between this European Standard
and the previous edition
Annex ZA (informative) - Clauses of this European
Standard addressing essential requirements
other provisions of EU Directives
Bibliography
This standard is included in DIN Handbook 39.
| Committee |
TC 277
|
| DevelopmentNote |
Supersedes DIN 18168-1 and DIN 18168-2:1984. (07/2004)
|
| DocumentType |
Standard
|
| Pages |
136
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 13964 : 2014 | Identical |
| NBN EN 13964 : 2014 | Identical |
| UNI EN 13964 : 2014 | Identical |
| I.S. EN 13964:2014 | Identical |
| NEN EN 13964 : 2014 | Identical |
| BS EN 13964:2014 | Identical |
| NF EN 13964 : 2014 | Identical |
| UNE-EN 13964:2016 | Identical |
| EN 13964:2014 | Identical |
| NS EN 13964 : 2014 | Identical |
| DIN 4109-33:2016-07 | SOUND INSULATION IN BUILDINGS - PART 33: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - TIMBER CONSTRUCTION, LIGHTWEIGHT CONSTRUCTION AND DRY WALLING |
| VDI 3755:2015-01 | Sound insulation and sound absorption of suspended ceilings |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN 13658-1:2005 | Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| ISO 10211:2017 | Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| ISO 10848-2:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 14190:2014 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| EN 12354-6:2003 | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 335:2013 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN 10244-2:2009 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
| EN 13245-1:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| EN 312:2010 | Particleboards - Specifications |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| EN 15283-2:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards |
| EN 14566:2008+A1:2009 | Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods |
| EN 13162:2012+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 15283-1:2008+A1:2009 | Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 10211:2017 | Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017) |
| EN 1168:2005+A3:2011 | Precast concrete products - Hollow core slabs |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| EN 13171:2012+A1:2015 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
| ISO 1006:1983 | Building construction Modular coordination Basic module |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
| EN ISO 10848-2:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the junction has a small influence (ISO 10848-2:2017) |
| EN 14195:2014 | Metal framing components for gypsum board systems - Definitions, requirements and test methods |
| EN 14716:2004 | Stretched ceilings - Requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.