DIN EN 13832-1:2006-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
Hardcopy , PDF
04-08-2019
English, German
01-01-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 SCOPE
2 NORMATIVE REFERENCES
3 TERMS AND DEFINITIONS
4 TEST METHODS
4.1 SAMPLING AND CONDITIONING
4.2 DEGRADATION TEST
4.2.1 Principle
4.2.2 Apparatus
4.2.3 Preparation of samples
4.2.4 Procedure
4.2.5 Assessment of the basic physical properties
of the footwear after degradation
4.2.6 Test report
4.3 PERMEATION TEST
4.3.1 Principle
4.3.2 Collecting media
4.3.3 Apparatus
4.3.4 Test pieces
4.3.5 Calibration
4.3.6 Preparation of test pieces and apparatus
4.3.7 Assessment of breakthrough time
4.3.8 Procedure
4.3.9 Examination after the permeation test
4.3.10 Expression of results
4.3.11 Test report
ANNEX A (INFORMATIVE) PRECISION OF THE TEST METHOD
ANNEX ZA (INFORMATIVE) RELATIONSHIP BETWEEN THIS EUROPEAN
STANDARD AND THE ESSENTIAL REQUIREMENTS OF EU
DIRECTIVE 89/686/EEC PERSONAL PROTECTIVE
EQUIPMENT
BIBLIOGRAPHY
National Annex NA (informative) Bibliography
Describes test methods for the determination of degradation, permeation and penetration resistance of footwear by chemicals and defines the terms to be used.
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 13832-1:2007 | Identical |
| SN EN 13832-1 : 2006 | Identical |
| UNI EN 13832-1 : 2007 | Identical |
| ONORM EN 13832-1 : 2006 | Identical |
| NEN EN 13832-1 : 2006 | Identical |
| I.S. EN 13832-1:2006 | Identical |
| NBN EN 13832-1 : 2007 | Identical |
| NS EN 13832-1 : 1ED 2006 | Identical |
| NF EN 13832-1 : 2006 | Identical |
| EN 13832-1:2018 | Identical |
| BS EN 13832-1:2006 | Identical |
| EN 13832-1:2006 | Identical |
| EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
| EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
| DIN ISO 23529:2012-10 | RUBBER - GENERAL PROCEDURES FOR PREPARING AND CONDITIONING TEST PIECES FOR PHYSICAL TEST METHODS (ISO 23529:2010) |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| EN ISO 20344:2011 | Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
| EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
| ISO 20347:2012 | Personal protective equipment Occupational footwear |
| EN ISO 20345:2011 | Personal protective equipment - Safety footwear (ISO 20345:2011) |
| EN 374-2:2014 | Protective gloves against dangerous chemicals and micro-organisms - Part 2: Determination of resistance to penetration |
| EN ISO 20347:2012 | Personal protective equipment - Occupational footwear (ISO 20347:2012) |
| ISO 20346:2014 | Personal protective equipment Protective footwear |
| EN ISO 20346:2014 | Personal protective equipment - Protective footwear (ISO 20346:2014) |
| ISO 20345:2011 | Personal protective equipment Safety footwear |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN 13832-2:2006 | Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
| ISO 20344:2011 | Personal protective equipment Test methods for footwear |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.