DIN EN 13774:2013-05
Current
Current
The latest, up-to-date edition.
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
05-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Requirements, type tests and production tests
6 Marking
Annex A (normative) - Test methods for valves
Annex B (informative) - European Standards for valves
Annex C (informative) - Summary of tests on product
and type tests
Bibliography
Defines metal isolating valves used for gas distribution systems with maximum operating pressure up to 16 bar, and which operate with fuel gases of the first, the second and the third family, in accordance with EN 437.
| Committee |
TC 69
|
| DevelopmentNote |
Supersedes DIN 3547-1 (07/2003)
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 13774:2013 | Identical |
| NS EN 13774 : 2013 | Identical |
| I.S. EN 13774:2013 | Identical |
| SN EN 13774:2013 | Identical |
| NF EN 13774 : 2013 | Identical |
| NBN EN 13774 : 2013 | Identical |
| NEN EN 13774 : 2013 | Identical |
| BS EN 13774:2013 | Identical |
| UNI EN 13774 : 2013 | Identical |
| UNE-EN 13774:2013 | Identical |
| DIN 3230-5:2014-11 | TECHNICAL CONDITIONS OF DELIVERY OF VALVES - VALVES FOR GAS INSTALLATIONS AND GAS PIPELINES - PART 5: REQUIREMENTS AND TESTS |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries |
| EN 1555-3:2010+A1:2012 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 12007-1:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| EN ISO 17292:2015 | Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2015) |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 10497:2010 | Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
| EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| EN 12117:1997 | Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.