DIN EN 13766:2010-11
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
Hardcopy , PDF
03-02-2019
English
01-01-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Materials and construction
6 Dimensions
6.1 Internal diameters, with tolerances and minimum bend radii
6.2 Tolerance on length
7 Performance requirements of hoses and hose assemblies
7.1 Film and fabric
7.2 Hoses
7.3 End fittings
7.4 Hose assemblies
8 Test frequency
9 Type approval tests
10 Marking
10.1 Hose marking
10.2 Hose assembly marking
Annex A (normative) Crush recovery test
Annex B (normative) Method of test for thermal ageing
Annex C (normative) Method of test of fittings subjected to low
temperatures
C.1 General
C.2 Specimen size
Annex D (normative) Sequence of hydrostatic tests
Annex E (normative) Method of test for fitting security
Annex F (normative) Method of test for leak tightness
Annex G (normative) Type approval and routine tests
for hoses and hose assemblies
Annex H (informative) Batch tests for hoses and hose assemblies
Describes requirements for two types of thermoplastic multi-layer (non-vulcanized) transfer hoses and hose assemblies for carrying liquefied petroleum gas and liquefied natural gas.
| DevelopmentNote |
DRAFT 2016 issued in November 2016. (11/2016)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 13766 : 2010 | Identical |
| NS EN 13766 : 2010 | Identical |
| NBN EN 13766 : 2010 | Identical |
| ONORM EN 13766 : 2010 | Identical |
| PREN 13766 : DRAFT 2016 | Identical |
| UNE-EN 13766:2011 | Identical |
| UNI EN 13766 : 2010 | Identical |
| SN EN 13766 : 2010 | Identical |
| I.S. EN 13766:2010 | Identical |
| NEN EN 13766 : 2010 | Identical |
| BS EN 13766:2010 | Identical |
| EN 13766:2010 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| ISO 4672:1997 | Rubber and plastics hoses Sub-ambient temperature flexibility tests |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 1474-2:2008 | Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses |
| EN ISO 8031:2009 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) |
| EN ISO 4672:1999 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests (ISO 4672:1997) |
| DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN ISO 7326:2016 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2016) |
| ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| DIN EN ISO 7326:2015-10 (Draft) | RUBBER AND PLASTICS HOSES - ASSESSMENT OF OZONE RESISTANCE UNDER STATIC CONDITIONS (ISO 7326:2016) |
| EN ISO 1746:2000 | Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) |
| DIN EN ISO 13934-1:2013-08 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| DIN EN ISO 1402:2010-04 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.