DIN EN 13547:2013-12
Current
The latest, up-to-date edition.
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
Hardcopy , PDF
German, English
12-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test procedures
6 Declaration of compliance
7 Designation
8 Marking
9 Preparation for storage and transportation
Annex A (normative) - Materials
Annex B (normative) - Pressure/temperature ratings
Annex C (normative) - Method of testing for the
determination of angular movement of
operating element
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive 97/23/EC (PED)
Bibliography
Pertains to copper alloy ball valves for general use having flanged, threaded, capillary or compression or loose nut/union body ends.
| Committee |
TC 69
|
| DevelopmentNote |
Supersedes DIN 25800-112 (02/2003) Supersedes DIN CEN/TS 13547. (12/2013)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 13547:2013 | Identical |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-5:1998 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| EN ISO 5211:2017 | Industrial valves - Part-turn actuator attachments (ISO 5211:2017) |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.