DIN EN 13443-1:2007-12
Current
The latest, up-to-date edition.
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
Hardcopy , PDF
English
01-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Einteilung
5 !Werkstoffe (chemisches und hygienisches Werkstoffverhalten)
6 Allgemeine Konstruktionsanforderungen
7 Anforderungen
8 Prüfungen
9 Technische Dokumente, Beschriftung und Kennzeichnung
Anhang A (informativ) Bibliografische Informationen
Anhang B (normativ) Einbau, Betrieb und Wartung
Literaturhinweise
This standard is included in DIN Handbook 12 and 12/1. Applies to mechanical filters for drinking water installations inside buildings, of nominal size from DN 15 to DN 100, minimum nominal pressure PN10, particle rating of 80 [mu]m to 150 [mu]m, and maximum design temperature of 30 degrees C.
| DevelopmentNote |
Supersedes DIN 19632 (06/2003)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 13443-1:2003 | Identical |
| NEN EN 13443-1 : 2003 + A1 2007 | Identical |
| NF EN 13443-1 : 2003 + A1 2007 | Identical |
| BS EN 13443-1:2002 | Identical |
| NBN EN 13443-1 : 2003 + A1 2007 | Identical |
| UNI EN 13443-1 : 2007 | Identical |
| I.S. EN 13443-1:2002 | Identical |
| EN 13443-1:2002+A1:2007 | Identical |
| NS EN 13443-1 : 2002 + A1 2007 | Identical |
| SN EN 13443-1 : 2002 + A1 2007 | Identical |
| DIN HDBK 12 : 11ED 2006 | WATER SUPPLY 1 - STANDARDS ON WATER EXTRACTION AND TREATMENT |
| DIN HDBK 12/1 : 12ED 2015 | WASSERVERSORGUNG 1 - WASSERGEWINNUNG, WASSERUNTERSUCHUNG, WASSERAUFBEREITUNG (VERFAHREN), TRINKWASSERBEHANDLUNG |
| VDI 2089 Blatt 1:2010-01 | Building Services in swimming baths - Indoor pools |
| DIN 1988-200:2012-05 | Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice |
| DIN 1988-7:2004-12 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE |
| ISO 9276-1:1998 | Representation of results of particle size analysis — Part 1: Graphical representation |
| DIN ISO 9276-1:2004-09 | Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998) |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 13443-2:2005+A1:2007 | Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
| EN 15161:2006 | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| EN 1567:1999 | Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| ISO 2591-1:1988 | Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 1333:2006 | Flanges and their joints - Pipework components - Definition and selection of PN |
| ISO 6509:1981 | Corrosion of metals and alloys Determination of dezincification resistance of brass |
| ISO 3822-3:1997 | Acoustics Laboratory tests on noise emission from appliances and equipment used in water supply installations Part 3: Mounting and operating conditions for in-line valves and appliances |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| ISO 13320-1:1999 | Particle size analysis Laser diffraction methods Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.