DIN EN 13035-2:2008-10
Current
The latest, up-to-date edition.
MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
Hardcopy , PDF
English
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
3.1 Allgemeine Begriffe
3.2 Begriffe, die Einrichtungen betreffen
4 Liste der signifikanten Gefährdungen
4.1 Allgemeines
4.2 Während des Transportierens
4.3 Während des Beladens und Abladens
4.4 Flachglastransport durch Innenlader
5 Sicherheitsanforderungen und/oder Schutzmassnahmen
5.1 Allgemeines
5.2 Allgemeine Anforderungen
5.3 Neigungswinkel
5.4 Glas-Festhaltesysteme
5.5 Träger und Abdeckmaterial
5.6 Spezielle Transportsysteme
5.6.1 Innenlader-Fahrzeug
5.6.2 Reff an Lkw und Transporter
5.6.3 Gestelle und Paletten
5.7 Vakuum-Hebeeinrichtung
6 Feststellung der Übereinstimmung mit den Sicherheitsanforderungen
und/oder Schutzmassnahmen
7 Benutzerinformation
7.1 Allgemeines
7.2 Signale und Warneinrichtungen
7.3 Begleitende Dokumente
7.4 Kennzeichnung
Anhang A (informativ) - Verschiedene Ausführungen von Einrichtungen
Anhang B (informativ) - Hinweise für Festhalteeinrichtungen für Glas
B.1 Hydraulisch und pneumatisch bewegte Halteeinrichtungen
B.2 Luftkissen/Kissen
B.3 (Sicherungs-)Stangen als Mittel zum Festhalten auf Reffs
B.4 Schutz von Gurten gegen Einwirkung durch Glas mit Hilfe
von Kantenschutz
B.5 (Ratschen-)Zurrgurte
Anhang C (informativ) - Symbole für Schilder und Zeichen
Anhang ZA (informativ) - Zusammenhang zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen
der EG-Richtlinie 98/37/EG
Anhang ZB (informativ) - Zusammenhang zwischen dieser Europäischen
Norm und den grundlegenden Anforderungen
der EU-Richtlinie 2006/42/EG
Literaturhinweise
Bilder
Tabellen
Specifies the requirements for safety for the design and installation of equipment intended for the storage, handling and transportation of flat glass outside the factory and including stillages, pallets, frails fixed to vehicles, in-loader vehicles, specific glass-securing devices, stanchions and vacuum-lifting devices which are used for road transport and on building sites.
| DevelopmentNote |
THE 2020 DRAFT VERSION HAS RELEASED FOR THE STANDARD DIN EN 13035-2
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 13035-2 : 2008 | Identical |
| EN 13035-2:2008 | Identical |
| BS EN 13035-2:2008 | Identical |
| NEN EN 13035-2 : 2008 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
| EN 13155:2003+A2:2009 | Cranes - Safety - Non-fixed load lifting attachments |
| EN 13035-3:2003 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines |
| EN 1088:1995+A2:2008 | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| EN 13035-9:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
| EN 13035-6:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
| EN 13394:2001 | Packaging - Specification for non-metallic tensional strapping |
| EN 999:1998+A1:2008 | Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
| DIN 4844-1:2012-06 | GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 13393:2001 | Packaging - Specification for Edge protectors |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| EN 12195-2:2000 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 14122-3:2016 | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN 13035-1:2008 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
| EN ISO 14122-4:2016 | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
| EN ISO 14122-2:2016 | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
| EN 13035-5:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 13035-4:2003+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
| EN 13246:2001 | Packaging - Specification for tensional steel strapping |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| EN 13035-7:2006+A1:2009 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
| EN ISO 14122-1:2016 | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 13035-11:2006+A1:2010 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.