DIN EN 12976-1:2014-07 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
THERMAL SOLAR SYSTEMS AND COMPONENTS - FACTORY MADE SYSTEMS - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
03-07-2021
German
01-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
Annex A (informative) - Conformity assessment
Annex B (informative) - Material combination with
regard to corrosion
Annex C (normative) - System families
Bibliography
Describes requirements on durability, reliability and safety for Factory Made solar heating systems.
| DevelopmentNote |
Supersedes DIN 4757-1. (10/2001)
|
| DocumentType |
Draft
|
| Pages |
23
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NEN EN 12976-1 : 2017 | Identical |
| NS EN 12976-1 : 2017 | Identical |
| UNE-EN 12976-1:2006 | Identical |
| SN EN 12976-1:2017 | Identical |
| NBN EN 12976-1 : 2006 | Identical |
| NF EN 12976-1 : 2017 | Identical |
| UNI EN 12976-1 : 2006 | Identical |
| BS EN 12976-1:2017 | Identical |
| I.S. EN 12976-1:2017 | Identical |
| ONORM EN 12976-1 : 2017 | Identical |
| EN 12976-1:2017 | Identical |
| VDI 4708 Blatt 1:2012-07 | Pressure maintenance, venting, deaeration - Pressure maintenance |
| VDI 2089 Blatt 3:2011-09 | Building installations in swimming baths - Open-air pools |
| VDI 6002 Blatt 1:2014-03 | Solar heating for potable water - Basic principles - System technology and application in residential buildings |
| DKI I 160 : 2006 |
| IEC 61024-1:1990 | Protection of structures against lightning - Part 1: General principles |
| ISO 9488:1999 | Solar energy Vocabulary |
| CEN/TR 16355:2012 | Recommendations for prevention of Legionella growth in installations inside buildings conveying water for human consumption |
| ISO 9459-5:2007 | Solar heating — Domestic water heating systems — Part 5: System performance characterization by means of whole-system tests and computer simulation |
| EN 1490:2000 | Building valves - Combined temperature and pressure relief valves - Tests and requirements |
| ISO/TR 10217:1989 | Solar energy Water heating systems Guide to material selection with regard to internal corrosion |
| EN 12975-1:2006+A1:2010 | Thermal solar systems and components - Solar collectors - Part 1: General requirements |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| ISO 9806:2017 | Solar energy — Solar thermal collectors — Test methods |
| CEN/TR 15601:2012 | Hygrothermal performance of buildings - Resistance to wind - driven rain of roof coverings with discontinuously laid small elements - Test methods |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| EN ISO 9488:1999 | Solar energy - Vocabulary (ISO 9488:1999) |
| EN 12976-2:2017 | Thermal solar systems and components - Factory made systems - Part 2: Test methods |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 12897:2016 | Water supply - Specification for indirectly heated unvented (closed) storage water heaters |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN 1489:2000 | Building valves - Pressure safety valves - Tests and requirements |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 12975-2:2006 | Thermal solar systems and components - Solar collectors - Part 2: Test methods |
| IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| EN 15092:2008 | Building valves - Inline hot water supply tempering valves - Tests and requirements |
| EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.