DIN EN 12927-7:2005-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE
Hardcopy , PDF
03-07-2021
English
01-01-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 Application of this standard
4.2 Safety principles
5 Maintenance
5.1 General
5.2 Rope cleaning or dressing
5.3 Relocation of track ropes and fixed grips
5.4 End fixing
5.5 Shortening of rope loops
5.6 End fixing of towing cords
6 Inspection
6.1 General
6.2 Periodical inspection
6.3 Extraordinary inspections
6.4 Visual annual inspection
6.5 Measurement
6.6 Magnetic MRT inspection
6.7 Ray inspection
6.8 Interpretation
6.9 Personnel requirements
6.10 Inspection report
7 Repair
7.1 General provisions
7.2 Stranded rope
7.3 Locked coil rope
8 Rope re-use
Annex A (informative) A-deviations
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU Directive
2000/9/EC relating to cableway installations designed to
carry persons
Defines the safety requirements applicable to maintaining, inspecting and repairing steel wire ropes and their related installations for passenger transportation by rope.
| DocumentType |
Standard
|
| Pages |
21
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NF EN 12927-7 : 2004 | Identical |
| UNE-EN 12927-7:2006 | Identical |
| NBN EN 12927-7 : 2004 | Identical |
| NEN EN 12927-7 : 2004 | Identical |
| NS EN 12927-7 : 1ED 2005 | Identical |
| I.S. EN 12927-7:2004 | Identical |
| SN EN 12927-7 : 2005 | Identical |
| UNI EN 12927-7 : 2005 | Identical |
| BS EN 12927-7:2004 | Identical |
| EN 12927-7:2004 | Identical |
| EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
| EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
| EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
| EN 12385-2:2002+A1:2008 | Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
| EN 444:1994 | Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays |
| EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
| EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
| PREN 1907 : DRAFT 2014 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TERMINOLOGY |
| EN 12385-1:2002+A1:2008 | Steel wire ropes - Safety - Part 1: General requirements |
| EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
| EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
| EN 12385-3:2004+A1:2008 | Steel wire ropes - Safety - Part 3: Information for use and maintenance |
| PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
| EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
| EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
| PREN 13796-2 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS |
| EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
| EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
| EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
| EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
| EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
| EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
| EN 12927-8:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
| EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
| PREN 13796-3 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.