DIN EN 12285-1:2016-10 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
Hardcopy , PDF
03-07-2021
German
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Symbole und Abkürzungen
5 Bezeichnung und Bestellangaben
6 Werkstoffe
6.1 Allgemeines
6.2 Werkstoffe für den Mantel, die gewölbten
Böden und die Mannlöcher
6.3 Werkstoffe für Tankzubehör
6.4 Zusatzstoffe
6.5 Werkstoffbescheinigung
7 Bauart
7.1 Bauformen
7.2 Einwandige Tanks
7.3 Doppelwandige Tanks
7.4 Gewölbte Böden
7.5 Kammern
7.6 Masse
7.6.1 Werkstoffdicke
7.6.2 Aussenmantel - Umschliessungswinkel
7.6.3 Überwachungsraum
7.7 Toleranzen
7.7.1 Gesamtlänge des Innenbehälters
7.7.2 Wanddicke
7.7.3 Umfang der gewölbten Böden
7.8 Mantelblechanordnung
7.9 Mannlöcher und Kontrollöffnungen
7.10 Befestigungsschrauben
7.11 Tankarmaturen, Rohre und Stutzen
7.12 Versteifungsringe
7.13 Trageösen
8 Fertigung
8.1 Blechvorbereitung
8.2 Formung der Bleche
8.3 Schweissnahttyp
8.4 Schweissverfahren, Qualifikation des Schweissers
8.5 Aussenbeschichtung
8.5.1 Allgemeines
8.5.2 Vorbereitung der Oberfläche
8.5.3 Oberflächenbeschichtung
9 Prüfung
9.1 Allgemeines
9.2 Druckprüfung
9.3 Prüfung der Aussenbeschichtung
10 Transport und Einbau
10.1 Transport
10.2 Einbau
11 Kennzeichnung und Herstellererklärung
11.1 Kennzeichnung des Tanks
11.2 Herstellererklärung
11.3 Zeichnungen
Anhang A (informativ) Transport, Lagerung und Einbauverfahren
Anhang B (informativ) Bewertung von
Flüssigkeits-Werkstoff-Kombinationen für Lagertanks
in Übereinstimmung mit dieser Norm
Anhang C (informativ) A-Abweichungen
Literaturhinweise
This standard is included in DIN Handbook 380. Describes the requirements for shop fabricated cylindrical, horizontal steel tanks, single and double skin for the underground storage of water polluting liquids (both flammable and non-flammable).
| DevelopmentNote |
Supersedes DIN 6608-1, DIN 6608-2 and DIN EN 12285. (07/2003) DRAFT 2016 issued in October 2016. (10/2016) DRAFT AMD 100 issued in February 2017. (02/2017)
|
| DocumentType |
Draft
|
| Pages |
231
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| NEN EN 12285-1 : 2003 | Identical |
| UNI EN 12285-1 : 2003 | Identical |
| NS EN 12285-1 : 1ED 2003 | Identical |
| NBN EN 12285-1 : 2003 | Identical |
| SN EN 12285-1 : 2003 | Identical |
| ONORM EN 12285-1 : 2003 | Identical |
| NF EN 12285-1 : 2003 | Identical |
| UNE-EN 12285-1:2004 | Identical |
| BS EN 12285-1:2003 | Identical |
| I.S. EN 12285-1:2003 | Identical |
| EN 12285-1:2003 | Identical |
| VDI 2067 Blatt 1:2012-09 | Economic efficiency of building installations - Fundamentals and economic calculation |
| VDI 3479:2010-08 | Emission control - Marketing installation tank farms |
| DIN HDBK 380 : 2ED 2014 |
| PREN 13160-2 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 2: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PRESSURE AND VACUUM SYSTEMS |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| PREN 13160-1 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| EN 288-1:1992/A1:1997 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING |
| EN 288-3:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 3: WELDING PROCEDURE TESTS FOR THE ARC WELDING OF STEELS |
| PREN 13160-6 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 6: SENSORS IN MONITORING WELLS |
| PREN 13160-3 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS |
| EN 10025:1990/A1:1993 | HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| EN 10028-2:2017 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| EN 288-2:1992/A1:1997 | SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| PREN 13160-5 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 5: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR IN-TANK GAUGE SYSTEMS AND PRESSURISED PIPEWORK SYSTEMS |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| EN 10055:1995 | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
| PREN 13160-4 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.