DIN EN 12094-8:2016-06 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR CONNECTORS
Hardcopy , PDF
03-07-2021
German
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Requirements
4.1 General design
4.2 Connection threads
4.3 Resistance to leakage
4.4 Resistance to bursting
4.5 Resistance of type 2 connectors to pressure and
heat
4.6 Resistance of type 2 connectors to heat and
cold shock
4.7 Resistance to cold
4.8 Resistance of type 2 connectors to flexing
4.9 Marking
4.10 Documentation
5 Type test methods
5.1 Conditions
5.2 Samples
5.3 Compliance
5.4 Test for resistance to leakage
5.5 Test for resistance to bursting
5.6 Test for resistance of type 2 connectors to
pressure and heat
5.7 Test for resistance of type 2 flexible connectors
to heat and cold shock
5.8 Test for resistance to cold
5.9 Test for resistance to flexing
Annex A (informative) Bibliography
States requirements and describes test methods for flexible and rigid connectors used in CO[2] -, Inert Gas- or Halocarbon gas fire extinguishing systems.
| DevelopmentNote |
DRAFT 2016 issued in June 2016. (06/2016)
|
| DocumentType |
Draft
|
| Pages |
43
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| UNI EN 12094-8 : 2006 | Identical |
| EN 12094-8:2006 | Identical |
| BS EN 12094-8:2006 | Identical |
| NBN EN 12094-8 : 2006 | Identical |
| UNE-EN 12094-8:2007 | Identical |
| SN EN 12094-8 : 2006 | Identical |
| NS EN 12094-8 : 2ED 2006 | Identical |
| NEN EN 12094-8 : 2006 | Identical |
| NF EN 12094-8 : 2006 | Identical |
| I.S. EN 12094-8:2006 | Identical |
| 93/68/EEC : 1993 AMD 2 1998 | COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| 1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
| EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
| 1990/384/EEC : 1990 | COUNCIL DIRECTIVE OF 20 JUNE 1990 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO NON-AUTOMATIC WEIGHING INSTRUMENTS |
| 1988/378/EEC : 1988 | COUNCIL DIRECTIVE OF 3 MAY 1988 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING THE SAFETY OF TOYS |
| EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
| 1973/23/EEC : 1973 | COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| 92/42/EEC : 1992 AMD 5 2013 | COUNCIL DIRECTIVE 92/42/EEC OF 21 MAY 1992 ON EFFICIENCY REQUIREMENTS FOR NEW HOT-WATER BOILERS FIRED WITH LIQUID OR GASEOUS FUELS |
| ISO/IEC Guide 65:1996 | General requirements for bodies operating product certification systems |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| 1987/404/EEC : 1987 | COUNCIL DIRECTIVE OF 25 JUNE 1987 ON THE HARMONIZATION OF THE LAWS OF THE MEMBER STATES RELATING TO SIMPLE PRESSURE VESSELS |
| 1990/396/EEC : 1990 | COUNCIL DIRECTIVE OF 29 JUNE 1990 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO APPLIANCES BURNING GASEOUS FUELS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.