DIN EN 1090-5:2017-07
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
Available format(s)
Hardcopy , PDF
Superseded date
06-30-2020
Superseded by
Published date
01-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Specifications and documentation
5 Constituent products
6 Manufacturing
7 Welding at the construction site
8 Mechanical Fastening
9 Erection
10 Surface protection
11 Geometrical tolerances
12 Inspection, testing and correction
Annex A (normative) - Basic requirements for profiled
sheeting
Annex B (normative) - Additional design requirements
for profiled sheeting
Annex C (informative) - Documentation
Annex D (normative) - Geometrical tolerances
Annex E (normative) - Galvanic corrosion
Annex F (normative) - Additional information
Bibliography
Defines requirements for the execution i.e. the manufacture and the installation of cold-formed structural aluminium components made from profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading conditions or seismic loading conditions and their documentation.
| DevelopmentNote |
Supersedes DIN 18807-9 E. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
63
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 1090-5:2017 | Identical |
| EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| EN ISO 376:2011 | Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011) |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| PREN 1090-4 : DRAFT 2014 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| ISO 6270-1:1998 | Paints and varnishes Determination of resistance to humidity Part 1: Continuous condensation |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN 508-2:2008 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 1396:2015 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 12056-1:2000 | Gravity drainage systems inside buildings - Part 1: General and performance requirements |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| EN 1090-1:2009+A1:2011 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| EN ISO 17872:2007 | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007) |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
| ISO 17872:2007 | Paints and varnishes Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| ISO 376:2011 | Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
| EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| CEN/TS 1187:2012 | Test methods for external fire exposure to roofs |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| EN 12056-3:2000 | Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| IEC 62305-3:2010 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.