DIN EN 10130 : 2007-04
NA
Status of Standard is Unknown
COLD-ROLLED LOW CARBON STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
04-01-2007
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Bezeichnung
5 Anforderungen
5.1 Erschmelzungsverfahren des Stahls und
Herstellungsart der Erzeugnisse
5.2 Desoxidationsart
5.3 Chemische Zusammensetzung
5.4 Lieferzustand
5.5 Mechanische Eigenschaften
5.6 Oberflächenbeschaffenheit
5.6.1 Allgemeines
5.6.2 Oberflächenart
5.6.3 Oberflächenausführung
5.7 Fliessfiguren
5.7.1 Allgemeines
5.7.2 Kalt nachgewalzte Erzeugnisse
5.7.3 Nicht kalt nachgewalzte Erzeugnisse
5.8 Eignung zu Oberflächenüberzügen
5.9 Schweisseignung
5.10 Grenzabmasse und Formtoleranzen
6 Prüfung
6.1 Allgemeines
6.2 Prüfeinheiten
6.3 Anzahl der Prüfungen
6.4 Probenahme
6.5 Durchführung der Prüfungen
6.6 Wiederholungsprüfungen
6.7 Prüfbeschein
7 Kennzeichnung
8 Verpackung
9 Beanstandungen
10 Bestellangaben
Literaturhinweise
This standard is included in DIN Handbook 67 and 402. Pertains to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600 mm for cold forming, with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of inquiry and order, equal to or less than 3 mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet.
| DevelopmentNote |
Supersedes SEW 095 (09/2000) Supersedes DIN 1623-1 (02/2003)
|
| DocumentType |
Standard
|
| ProductNote |
Supersedes SEW 095 (AE 09/2000) Supersedes DIN 1623-1 (ABM 02/2003)
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
NA
|
| Standards | Relationship |
| UNE-EN 10130:2008 | Identical |
| NBN EN 10130 : 2007 | Identical |
| NS EN 10130 : 3ED 2006 | Identical |
| NF EN 10130 : 2007 | Identical |
| EN 10130:2006 | Identical |
| BS EN 10130:2006 | Identical |
| NEN EN 10130 : 2007 | Identical |
| I.S. EN 10130:2006 | Identical |
| SN EN 10130 : 2007 | Identical |
| UNI EN 10130 : 2007 | Identical |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| ISO 10275:2007 | Metallic materials Sheet and strip Determination of tensile strain hardening exponent |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10049:2013 | Measurement of roughness average Ra and peak count RPc on metallic flat products |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 10113:2006 | Metallic materials Sheet and strip Determination of plastic strain ratio |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 606:2004 | Bar coding - Transport and handling labels for steel products |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.