DIN EN 10079:2007-06
Current
Current
The latest, up-to-date edition.
Definition of steel products
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
06-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 10079:2007 | Identical |
| NBN EN 10079 : 2007 | Identical |
| UNE-EN 10079:2008 | Identical |
| NEN EN 10079 : 2007 | Identical |
| UNI EN 10079 : 2007 | Identical |
| SN EN 10079 : 2008 | Identical |
| I.S. EN 10079:2007 | Identical |
| NS EN 10079 : 2ED 2007 | Identical |
| BS EN 10079:2007 | Identical |
| NF EN 10079 : 2007 | Identical |
| DIN 17115:2012-07 | STEELS FOR WELDED ROUND LINK CHAINS AND CHAIN COMPONENTS - TECHNICAL DELIVERY CONDITIONS |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| EURONORM 54 : 1980 | HOT-ROLLED SMALL U-BEAMS |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| ISO 10241:1992 | International terminology standards Preparation and layout |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| ISO 6929:2013 | Steel products — Vocabulary |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10218-2:2012 | Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 10056-2:1993 | Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10248-2:1995 | Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10279:2000 | Hot rolled steel channels - Tolerances on shape, dimensions and mass |
| EN 10034:1993 | Structural steel I and H sections - Tolerances on shape and dimensions |
| PREN 10138-2 : DRAFT 2000 | PRESTRESSING STEELS - PART 2: WIRE |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EURONORM 53 : 1962 | HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS |
| EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| EN 10024:1995 | Hot rolled taper flange I sections - Tolerances on shape and dimensions |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10092-1:2003 | Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EURONORM 19 : 1957 | IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| EN 10060:2003 | Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10108:2004 | Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10017:2004 | Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
| EN 10294-1:2005 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10219-2:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10061:2003 | Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10059:2003 | Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10092-2:2003 | Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions |
| PREN 10138-4 : DRAFT 2000 | PRESTRESSING STEELS - PART 4: BARS |
| EN 10055:1995 | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| EN 10265:1995 | Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| EN 10067:1996 | Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
| EURONORM 91 : 1981 | HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| EN 10249-2:1995 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.