DIN 57636-22 : 1984
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
LOW-VOLTAGE FUSES - PART 22: H.R.C. FUSES; H.R.C. FUSES UP TO 1250 A AND 1000 V A.C. FOR PROTECTION OF EQUIPMENT
10-22-2017
01-12-2013
1 Anwendungsbereich
2 Begriffe
2.1 NH-Sicherungsleiste
2.2 Schlagvorrichtung
2.3 Schaltzustandsgeber
2.4 Auslösevorrichtung
2.5 Einschwenk- oder Einsetzvorrichtung
2.6 Grifflaschen
2.7 Bemessungsstrom
3 Betriebsbedingungen
4 Klassifikation
5 Charakteristische Merkmale
5.1 Spannungen
5.2 Ströme
5.3 Kennlinien
5.4 Selektivität
5.5 Kennlinienbeständigkeit
5.6 Erwärmung und Verlustleistung
5.7 Ausschaltvermögen
6 Anforderungen
6.1 Allgemeines
6.2 Unverwechselbarkeit
6.3 Berührungsschutz
6.4 Kriech-, Luftstrecken und Abstände
6.5 Leiteranschlüsse
6.6 NH-Sicherungsunterteile bzw NH-Sicherungsleisten
6.7 Sicherungseinsätze
6.8 Kontaktstücke
6.9 Werkstoffe
6.10 Isolierteile
6.11 Kennzeichnung
7 Prüfung
7.1 Allgemeines
7.2 Masse, Kennzeichnung, Kriech- und Luftstrecken,
Abstände
7.3 Kriechstromfestigkeit
7.4 Spannungsfestigkeit und Isolationswiderstand
7.5 Erwärmung und Verlustleistung
7.6 Zeit/Strom-Verhalten
7.7 Kennlinienbeständigkeit
7.8 Wärme-, Schlagfestigkeit und Feuersicherheit
7.9 Widerstandsfähigkeit gegen Korrosion (Rost)
7.10 Mechanische Festigkeit und Montierbarkeit
7.11 Ausschaltvermögen und Schaltspannung
7.12 Selektivität
7.13 Funktion des Anzeigers und der Schlagvorrichtung
7.14 Alterungsbeständigkeit der Kontakte
7.15 Dynamische Kurzschlussfestigkeit von
NH-Sicherungsunterteilen und NH-Sicherungsleisten
7.16 Alterungsbeständigkeit von Leiteranschlussklemmen an
NH-Sicherungsunterteilen und NH-Sicherungsleisten
Bilder
Zitierte Normen und andere Unterlagen
Erläuterungen
Diese Norm gilt im Rahmen von DIN 57636 Teil 1/VDE 0636 Teil 1 für Niederspannungs-HochleistungsSicherungen (kurz NH-Sicherungen) nach DIN 43620 Teil 1, Teil 3 und Teil 4 für den Anlagenschutz, d.h. für Schaltgeräteschutz aM, Bergbauanlagenschutz gB und Transformatorenschutz gTr; sie gilt ferner für NH-Sicherungsleisten nach DIN 43623. Sie gilt auch für genormte NH-Sicherungseinsätze mit Schlagvorrichtung sowie für NH-Sicherungsunterteile und NH-Sicherungsleisten mit Auslösevorrichtungen.
| DocumentType |
Standard
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Withdrawn
|
| Standards | Relationship |
| VDE 0636-22 : 1984 | Corresponds |
| DIN VDE 0636-22 : 1984 | Corresponds |
| DIN VDE 0636-41 : 1983 | LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C. |
| DIN 57636-21 : 1984 | LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C. |
| DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
| DIN 57636-31 : 1983 | LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C. |
| DIN 57636-41 : 1983 | LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C. |
| DIN VDE 0636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
| DIN 931-1:1987-09 | M 1,6 TO M 39 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| DIN 57636-21 : 1984 | LOW-VOLTAGE FUSES - PART 21: H.R.C. FUSES; PROTECTION OF CABLES AND CORDS UP TO 1250 A AND 500 V A.C., 440 V D.C. AND 660 V A.C. |
| DIN 42523:1987-05 | TRANSFORMERS - ENCAPSULATED-WINDING DRY-TYPE TRANSFORMERS - 50 HZ, 100 TO 2500 KVA |
| DIN 42500:1984-09 | THREE-PHASE OIL-IMMERSED PUBLIC DISTRIBUTION TRANSFORMERS 50 HZ, FROM 50 TO 2500 KVA, U[M] = 24 KV |
| VDE 0636-23 : 1984 | LOW-VOLTAGE FUSES - LV HRC FUSES FOR PROTECTION OF SEMICONDUCTORS UP TO 1600 A & UP TO 3000 V |
| DIN IEC 60068-2-3:1986-12 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS; TEST CA: DAMP HEAT, STEADY STATE |
| DIN 43623:1981-05 | THREE-POLE FUSE-BASE RACKS 660 V, 100 TO 630 A, FOR L.V.H.R.C. FUSES, FOR BUSBAR MOUNTING |
| VDE 0110B : 1979 | SPECIFICATIONS FOR CLEARANCES AND CREEPAGE DISTANCES IN ELECTRICAL EQUIPMENT; AMENDMENT TO VDE 0110/11.72 |
| DIN 267-11:1980-01 | FASTENERS - TECHNICAL DELIVERY CONDITIONS (WITH ADDITIONS TO ISO 3506) - CORROSION-RESISTANT STAINLESS STEEL FASTENERS |
| DIN 53480 : 1976 | VDE-BESTIMMUNG FUER ELEKTRISCHE PRUEFUNGEN VON ISOLIERSTOFFEN; KRIECHSTROMFESTIGKEIT |
| DIN 57636-31 : 1983 | LOW VOLTAGE FUSES - PART 31: D-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 500 V AND/OR UP TO 63 A 660 V A.C. 600 V D.C. |
| DIN 57680-4 : 1980 | PERSONNEL PROTECTIVE EQUIPMENT, PROTECTIVE AND APPARATUS FOR WORK ON ENERGIZED SYSTEMS UP TO 1000 V; PART 4: FUSE HANDLES FOR LOW-TENSION HRC-FUSES |
| DIN 57636-23 : 1984 | NIEDERSPANNUNGSSICHERUNGEN; NH-SYSTEM, HALBLEITERSCHUTZSICHERUNGEN BIS 1600 A UND BIS 3000 V |
| VDE 0303-1 : 1984 | METHOD FOR DETERMINING THE COMPARATIVE AND THE PROOF TRACKING INDICES OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
| DIN 43620-4:1981-09 | LOW VOLTAGE HIGH-RUPTURING-CAPACITY FUSES WITH BLADE CONTACTS 500 AND 660 V A.C. AND 440 D.C. - REPLACEMENT HANDLE FOR THE SIZES 00 UP TO 3 - DIMENSIONS OF THE ENGAGING PART |
| DIN 42524:1987-05 | TRANSFORMERS - NON-ENCAPSULATED-WINDING DRY-TYPE TRANSFORMERS - 50 HZ, 100 TO 1600 KVA |
| DIN 57636-41 : 1983 | LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C. |
| DIN 46206-2:1971-06 | SUPPLY-TERMINALS FOR ELECTRICAL EQUIPMENT >= 40 A, CONNECTIONS WITH RECTANGULAR CROSS-SECTION, BASIC DIMENSIONS AND COORDINATION |
| DIN 43620-1:1984-05 | LOW VOLTAGE HIGH RUPTURING CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE LINKS FOR 500 & 660 V A.C. & 440 V D.C. |
| DIN 43620-3:1984-05 | LOW-VOLTAGE, HIGH-RUPTURING-CAPACITY FUSES WITH BLADE CONTACTS; LV HRC FUSE BASES FOR LV HRC FUSE LINKS FOR 500 AND 660 V A.C. AND 440 V D.C. |
| VDE 0636-31 : 2015 | Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) – Examples of standardized systems of fuses A to F – National Supplement 1: Rated voltage = AC 690 V and rated voltage = DC 600 V |
| DIN 57635 : 1984 | LOW VOLTAGE FUSES; D-FUSES E 16 UP TO 25 A, 500 V; D-FUSES UP TO 100 A, 750 V; D-FUSES UP TO 100 A, 500 V |
| DIN 933:1987-09 | M 1.6 TO M 52 HEXAGON HEAD SCREWS THREADED UP TO THE HEAD; PRODUCT GRADES A & B |
| DIN 50018:2013-05 | Testing in a saturated atmosphere in the presence of sulfur dioxide |
| VDE 0110 : 1972 | SPECIFICATION FOR CLEARANCES AND CREEPAGE DISTANCES IN ELECTRICAL EQUIPMENT |
| DIN 57471-2 : 1975 | VDE SPECIFICATIONS FOR FIRE RISK TESTING OF ELECTROTECHNICAL PRODUCTS, THEIR SUBASSEMBLIES AND COMPONENTS - GLOW-WIRE TEST |
| VDE 0635 : 1984 | LOW-VOLTAGE FUSES - D-FUSES E 16 UP TO 25 A, 500 V - D-FUSES UP TO 100 A 750 V - D-FUSES UP TO 100 A, 500 V |
| DIN 57636-1 : 1983 | LOW-VOLTAGES FUSES - PART 1: GENERAL REQUIREMENTS |
| VDE 0636-1 : 2015 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006 + A1:2009 + A2:2014) |
| VDE 0636-21 : 2015 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - NATIONAL SUPPLEMENT 1: PROTECTION OF SPECIAL ELECTRICAL SYSTEMS |
| VDE 0636-41 : 1983 | LOW-VOLTAGE FUSES - PART 41: D0-SYSTEM; PROTECTION OF CABLES AND CORDS UP TO 100 A AND 380 V A.C. 250 V D.C. |
| VDE 0680-4 : 1980 | PERSONNEL PROTECTIVE EQUIPMENT, PROTECTIVE DEVICES & APPARATUS FOR WORK ON ELECTRICALLY ENERGIZED SYSTEMS UP TO 1000V - FUSE HANDLES FOR LOW-TENSION HRC-FUSES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.