DIN 53508:2000-03
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Accelerated ageing of rubber
Available format(s)
Hardcopy , PDF
Superseded date
03-01-2024
Superseded by
Language(s)
English, German
Published date
03-01-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.Kein Inhaltsverzeichnis in der Norm vorhanden.
This standard is included in DIN Handbook 479. The test methods specified serve to determine the resistance of rubber to deterioration. These methods involve subjecting test pieces to accelerated ageing (heating either in air at atmospheric pressure or in oxygen at an elevated pressure).
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| VDE 0789-100 : 1984 | CLASSROOMS AND LABORATORIES FITMENTS EQUIPMENT AND FURNITURE SAFETY SPECIFICATION FOR POWERED CONSTRUCTIONAL UNITS |
| BWB TL 8335-0024 : 3ED 2006 | PROFILATED RUBBER SOLE |
| BWB TL 8430-0063 : 2ED 2009 | ON-BOARD SHOE, NAVY, FOR HOT/DRY CLIMATE |
| ISO 22538-3:2007 | Space systems Oxygen safety Part 3: Selection of non-metallic materials for oxygen systems and components |
| BWB TL 8305-0139 : 8ED 2004 | |
| BWB TL 4220-0026 : 1ED 2002 | LIFE RAFT, 10 MAN, INFLATABLE; LIFE RAFT, 20 MAN, INFLATABLE |
| BWB TL 7220-0001 : 5ED 2006 | COIR MAT, 200 CM X 80 CM |
| DIN HDBK 479 : 2ED 2017 | KAUTSCHUK UND ELASTOMERE - PHYSIKALISCHE UND CHEMISCHE PRUEFVERFAHREN |
| DIN 28062:1978-08 | CHEMICAL EQUIPMENT; BUILDING MATERIALS FOR BRICK LINING, CLASSIFICATION, PROPERTIES, TESTING |
| DIN EN 13483:2013-09 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| DIN EN ISO 12402-7:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| VDI/VDE 2256 Blatt 2:1988-01 | Precision engineering components; damping components; impact dampings |
| BWB TL 4240-0065 : 2ED 2006 | FILTER, NON-MAGNETISABLE, FOR CBRN PROTECTIVE MASK M2000 |
| BWB TL 8435-0020 : 10ED 2008 | COMBAT BOOT, WOMEN'S, DIRECT INJECTION-MOULDED SOLE |
| BWB TL 8415-0309 : 1ED 2006 | FINGERHANDSCHUH, CHEMIKALIENSCHUTZ FUER PROBENAHMEVORRICHTUNG TPZ-1 ABC |
| DIN 73411:1979-07 | HOSES FOR COOLING PIPES IN MOTOR VEHICLES; REQUIREMENTS, DIMENSIONS, TESTS |
| BWB TL 8430-0039 : 14ED 2009 | COMBAT BOOT, MEN'S, DIRECT INJECTION-MOULDED SOLE |
| BWB TL 1940-0012 : 5ED 2007 | |
| DIN 73379-2:1997-11 | FUEL HOSES - PART 2: REQUIREMENTS AND TESTS |
| DIN EN ISO 1403:2010-04 | RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| DIN 73411-2:1996-10 | COOLING PIPES IN MOTOR VEHICLES - HOSES AND COMPOUNDS - PART 2: REQUIREMENTS, TESTING |
| DIN 45673-8:2015-04 (Draft) | MECHANICAL VIBRATION - RESILIENT ELEMENTS USED IN RAILWAY TRACKS - PART 8: LABORATORY TEST PROCEDURES FOR CONTINUOUS ELASTIC RAIL SUPPORTS |
| DIN EN 1762:2016-09 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| DIN 57789-100 : 1984 | CLASSROOMS AND LABORATORIES FITMENTS EQUIPMENT AND FURNITURE SAFETY SPECIFICATION FOR POWERED CONSTRUCTIONAL UNITS |
| DIN EN 3050:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION |
| DIN EN ISO 14890:2013-06 | CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR GENERAL USE (ISO 14890:2013) |
| DIN 3535-1:1991-07 | SEALANTS FOR GAS SUPPLIES; ELASTOMERIC GASKET MATERIALS FOR GAS VALVES IN DOMESTIC INSTALLATIONS; REQUIREMENTS AND TESTS |
| DIN 3535-3:1986-04 | SEALS FOR GAS SUPPLY MATERIALS FOR SEALS OF RUBBER GAS SUPPLY MAINS AND PIPELINES, REQUIREMENTS AND TESTS OF MATERIALS |
| DIN 53530:1981-02 | TESTING OF ORGANIC MATERIALS; SEPARATION TEST ON FABRIC PLIES BONDED TOGETHER |
| DIN EN 1763-1:2001-04 | RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
| DIN EN 1360:2013-09 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| BWB TL 8305-0253 : 6ED 2001 | POLYESTER WOVEN FABRIC, PVC-COATED |
| DIN EN ISO 8029:2014-12 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| DIN EN 549:1995-04 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| DIN EN 682:2006-10 | Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| DIN 4815-4:1987-04 | HOSES FOR LPG; HOSES AND HOSE ASSEMBLIES FOR FUEL GAS INSTALLATIONS IN VEHICLES |
| DIN 8541-4:1983-03 | HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES; OXYGEN HOSES WITH OUTER PROTECTIVE COVER FOR SPECIAL REQUIREMENTS; SAFETY REQUIREMENTS AND TESTING |
| DIN VDE 0789-100 : 1984 | CLASSROOMS AND LABORATORIES FITMENTS EQUIPMENT AND FURNITURE SAFETY SPECIFICATION FOR POWERED CONSTRUCTIONAL UNITS |
| BWB TL 8315-0047 : 2ED 2002 | |
| DIN 14811-1:1990-01 | FIRE HOSES - REQUIREMENTS, TESTING, TREATMENT |
| DIN 65271:2002-07 | AEROSPACE SERIES - ELASTOMERIC SEMI-FINISHED PRODUCTS AND PARTS - TECHNICAL SPECIFICATION |
| DIN 58993:1991-02 | RUBBER LATEX CONDOMS; REQUIREMENTS AND TESTING |
| DIN 4815-3:1985-07 | FLEXIBLE TUBES FOR LPG; FLEXIBLE TUBES FOR FILLING AND EMPTYING OF TRANSPORTATION VEHICLES |
| DIN 19704-2:2014-11 | HYDRAULIC STEEL STRUCTURES - PART 2: DESIGN AND MANUFACTURING |
| DIN EN ISO 6134:2015-10 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
| DIN 45673-9:2015-08 | MECHANICAL VIBRATION - RESILIENT ELEMENTS USED IN RAILWAY TRACKS - PART 9: LABORATORY TEST PROCEDURES FOR DISCRETE RESILIENT RAIL FASTENING SYSTEMS |
| BWB TL 8305-0207 : 4ED 2004 | |
| VDE 0472-303 : 1990 | TESTING OF CABLES, WIRE & FLEXIBLE CORDS - AGEING PROCEDURES |
| BWB TL 8435-0003 : 3ED 2013 | COMBAT BOOTS, CLIMATE CATEGORY HOT/DRY, WOMEN'S |
| DIN EN ISO 4641:2016-07 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION (ISO 4641:2016) |
| BWB TL 8305-0148 : 5ED 2000 | PVC-COATED WOVEN FABRICS |
| BWB TL 8315-0045 : 6ED 2009 | ELASTIC TEXTILE BRAIDINGS AND RIBBONS |
| DIN ISO 3384-1:2015-12 | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) |
| DIN 22102-2:2014-01 | CONVEYOR BELTS WITH TEXTILE PLIES FOR BULK GOODS - PART 2: TESTING |
| DIN EN ISO 22721:2010-01 | Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007) |
| DIN 65210-1:1987-11 | AEROSPACE; HOSE ASSEMBLIES FOR NOMINAL PRESSURE UP TO 210 BAR; TECHNICAL SPECIFICATION FOR HOSES |
| DIN EN 12068:1999-03 | EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| DIN 8541-3:1995-01 | Rubber oxygen hoses for welding, cutting and allied processes, with or without protective cover, designed for special requirements - Part 3: Safety requirements and testing |
| DIN EN 1123-1:1999-03 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL |
| DIN 53519-1:1972-05 | TESTING OF ELASTOMERS; DETERMINATION OF INDENTATION HARDNESS OF SOFT RUBBER (IRHD); HARDNESS TESTING ON STANDARD SPECIMENS |
| DIN 53504:2015-08 (Draft) | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
| DIN 53598-1:1983-07 | STATISTICAL EVALUATION AT OFF-HAND SAMPLES WITH EXAMPLES FROM TESTING RUBBERS AND PLASTICS |
| DIN 50035-1:1989-03 | TERMS AND DEFINITIONS USED ON AGEING OF MATERIALS; BASIC TERMS AND DEFINITIONS |
| DIN 50035-2:1989-04 | TERMS AND DEFINITIONS USED ON AGEING OF MATERIALS; EXAMPLES CONCERNING POLYMERIC MATERIALS |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| DIN ISO 5725:1988-04 | PRECISION OF TEST METHODS - DETERMINATION OF REPEATABILITY AND REPRODUCIBILITY FOR A STANDARD TEST METHOD BY INTER-LABORATORY TESTS |
| DIN 53505:2000-08 | TESTING OF RUBBER - SHORE A AND SHORE D HARDNESS TEST |
| DIN 50014:1985-07 | CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.