DIN 51900-2:2003-05
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Determining the gross calorific value of solid and liquid fuels using the isoperibol or static jacket calorimeter and calculation of net calorific value
Hardcopy , PDF
12-02-2023
German, English
05-01-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.Kein Inhaltsverzeichnis in der Norm vorhanden.
The calorimetric bomb, prepared as described in DIN 51900 Part 1, August 1977 edition, Section 10, is placed in the calorimeter vessel which has been filled with water and placed inside an isothermal water jacket. The fuel sample is ignited, the curve of the temperature rise of the calorimeter water which occurs is observed and recorded. From this, the corrected temperature rise is calculated on the basis of Newton's Law of cooling and the gross calorific value of the sample determined, taking into account the effective heat capacity of the calorimeter system (see Notes).
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| DIN 4102-1:1998-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 1: BUILDING MATERIALS; CONCEPTS, REQUIREMENTS AND TESTS |
| DIN 51603-4:2011-08 | Liquid fuels - Fuel oils - Part 4: Fuel oils R, Minimum requirements |
| DIN 4341-1:1979-08 | GAS TURBINES - ACCEPTANCE TESTS |
| NF EN 14214 : 2013 + A1 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BWB TL 1376-0600-520 : 2ED 2001 | REGULATIONS FOR CHEMICAL AND PHYSICAL EXAMINATIONS OF PROPELLANT POWDER (TLP) 3.41 DETERMINATION OF EXPLOSIVE HEAT BY MEANS OF ISOTHERMAL/ISOPERIBOLIC/STATIC JACKET CALORIMETER |
| DIN 55990-6:1979-12 | TESTING OF PAINTS, VARNISHES AND SIMILAR COATING MATERIALS; POWDER COATINGS, CALCULATION OF LOWER IGNITION LIMIT |
| I.S. EN 14213:2003 | HEATING FUELS - FATTY ACID METHYL ESTERS (FAME) - REQUIREMENTS AND TEST METHODS |
| DIN SPEC 51623:2012-06 | FUELS FOR VEGETABLE OIL COMPATIBLE COMBUSTION ENGINES - FUEL FROM VEGETABLE OIL - REQUIREMENTS AND TEST METHODS |
| DIN 4702-2:1990-03 | CENTRAL HEATING BOILERS, TEST CODE |
| S.R. CWA 16379:2011 | FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 14156:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods |
| VGB-S-002-T-01 : 2015 | |
| DIN 51900-1:2000-04 | Determining the gross calorific value of solid and liquid fuels using the bomb calorimeter, and calculation of net calorific value - Part 1: General information |
| DIN 51623:2015-12 | FUELS FOR VEGETABLE OIL COMPATIBLE COMBUSTION ENGINES - FUEL FROM VEGETABLE OIL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| EN 14156:2003 | Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
| DIN 18230-2:1999-01 | STRUCTURAL FIRE PROTECTION IN INDUSTRIAL BUILDINGS - PART 2: DETERMINATION OF COMBUSTION BEHAVIOUR OF MATERIALS IN STORAGE ARRANGEMENT - COMBUSTION FACTOR M |
| DIN 18230-1:2010-09 | Structural fire protection in industrial buildings - Part 1: Analytically required fire resistance time |
| BS EN 14213:2003 | Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods |
| DIN 51603-1:2016-08 (Draft) | LIQUID FUELS - FUEL OILS - PART 1: FUEL OILS EL, MINIMUM REQUIREMENTS |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| DIN 51900-1:2000-04 | Determining the gross calorific value of solid and liquid fuels using the bomb calorimeter, and calculation of net calorific value - Part 1: General information |
| DIN EN 61010-1 : 2011 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.