DIN 45669-1:2010-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MEASUREMENT OF VIBRATION IMMISSION - PART 1: VIBRATION METERS - REQUIREMENTS AND TESTS
Hardcopy , PDF
09-04-2019
01-01-2010
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Requirements
6 Tests
7 Mechanical calibration equipment
8 Electrical calibration equipment
9 Marking
10 Data sheet
11 Operating instructions
Annex A (informative) - Examples of KB[F] signal generation
Annex B (informative) - Ripple
Annex C (informative) - Testing phase response characteristics
by the tangent method
Annex D (informative) - Method for determining the
significant frequency f[mg]
Annex E (normative) - Method for assessing the effects
of transient vibrations on building structures
without determining the significant frequency
Bibliography
This standard is included in DIN Handbook 289.
DevelopmentNote |
Supersedes DIN 45669-3. (09/2010) DRAFT 2018 issued in May 2018. (06/2018)
|
DocumentType |
Standard
|
Pages |
53
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
DIN 45669-2:2005-06 | Measurement of vibration immission - Part 2: Measuring method |
DIN 45672-2:1995-07 | VIBRATION MEASUREMENT ASSOCIATED WITH RAILWAY TRAFFIC SYSTEMS - PART 2: EVALUATION METHOD |
DIN 40046-57:1981-11 | ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRICAL ENGINEERING - PROCEDURE FOR MEASURING DYNAMIC STRESSES |
DIN 45671-1:1990-09 | MEASUREMENT OF EXPOSURE TO OCCUPATIONAL VIBRATION; VIBROMETERS; REQUIREMENTS AND TESTING |
DIN HDBK 289 : 3ED 2014 | |
VDI 4085:2017-04 | Planning, construction and managing of scrapyards - Facilities and equipment for the handling, storage and treatment of scraps and other materials |
VDI 3842:2004-06 | Vibrations in piping systems |
VDI 2038 Blatt 2:2013-01 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Shock and vibration - prognosis, measurement, evaluation and reduction measures |
VDI 2057-1 : 2017 COR 1 2017 | HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
VDI/VDE 2627 Blatt 1:2015-12 | Measuring rooms - Classification and characteristics - Planning and execution |
VDI 2038 Blatt 1:2012-06 | Serviceability of structures under dynamic loads - Methods of analysis and evaluation in structural dynamics - Basics, methods, procedures and loads |
VDI 2587 Blatt 3:2001-11 | Emissions control - Finishing plants for rolls of particularly packaging materials - Coating, varnishing, lamination and vapour coating |
DIN 70003:1993-08 | VIBRATIONAL STRESS - MEASUREMENT OF PARAMETERS ON VEHICLE PARTS |
DIN 45688:2014-07 | SPECIFIC REQUIREMENTS FOR THE COMPETENCE OF TESTING LABORATORIES FOR NOISE AND VIBRATION IN THE FIELD OF IMMISSION CONTROL |
DIN 45672-1:2009-12 | VIBRATION MEASUREMENT ASSOCIATED WITH RAILWAY TRAFFIC SYSTEMS - PART 1: MEASURING METHOD FOR VIBRATION |
VDE 0039 : 2001 | PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION |
VDE 0847-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
DIN EN 62079 : 2001 | PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION |
DIN ISO 16063-21:2016-08 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 21: VIBRATION CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-21:2003 + COR. 1:2009 + AMD.1:2016) |
DIN 45662:1996-12 | VIBRATION MEASURING INSTRUMENTATION - FUNDAMENTAL REQUIREMENTS AND VERIFICATION |
VDI 2057 Blatt 3:2017-03 | Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings |
ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
DIN EN 61000-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
DIN EN 60529 : 2014-09 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529:1989 + A1:1999 + A2:2013) |
VDI 2057-1 : 2017 COR 1 2017 | HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
DIN 4150-3:2015-10 (Draft) | VIBRATION IN BUILDINGS - PART 3: EFFECTS ON STRUCTURES |
DIN 45669-2:2005-06 | Measurement of vibration immission - Part 2: Measuring method |
DIN EN 61000-4-2 : 2009 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-2: TESTING AND MEASUREMENT TECHNIQUES - ELECTROSTATIC DISCHARGE IMMUNITY TEST |
VDE 0847-4-3 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
DIN 45661:2016-03 | VIBRATION MEASURING INSTRUMENTATION - VOCABULARY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.