DIN 40080:1979-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
04-01-1993
01-12-2013
1 Zweck, Anwendungsbereich, Grundbegriffe
2 Klassifizierung von Fehlern und fehlerhaften
Einheiten
3 Anteil fehlerhafter Einheiten in Prozent und
Fehler je hundert Einheiten
4 Annehmbare Qualitätsgrenzlage (AQL)
5 Vorlegen des Produkts
6 Annahme und Rückweisung
7 Stichprobenentnahme
8 Normale, verschärfte und reduzierte Prüfung
9 Stichprobenanweisungen
10 Feststellung der Annehmbarkeit
11 Ergänzende Informationen
Tabellen
I Kennbuchstaben für den Stichprobenumfang
II-A Einfach-Stichprobenpläne für normale Prüfung
II-B Einfach-Stichprobenpläne für verschärfte Prüfung
II-C Einfach-Stichprobenpläne für reduzierte Prüfung
III-A Doppel-Stichprobenpläne für normale Prüfung
III-B Doppel-Stichprobenpläne für verschärfte Prüfung
III-C Doppel-Stichprobenpläne für reduzierte Prüfung
IV-A Mehrfach-Stichprobenpläne für normale Prüfung
IV-B Mehrfach-Stichprobenpläne für verschärfte Prüfung
IV-C Mehrfach-Stichprobenpläne für reduzierte Prüfung
V-A Grösster Durchschlupf für normale Prüfung
(Einfach-Stichproben)
V-B Grösster Durchschlupf für verschärfte Prüfung
(Einfach-Stichproben)
VI-A Rückzuweisende Qualitätsgrenzlage (als
Anteil fehlerhafter Einheiten in %) für P[a] = 10 %
(Normale Prüfung, Einfach-Stichproben)
VI-B Rückzuweisende Qualitätsgrenzlage (als Fehler
je 100 Einheiten) für P[a] = 10 % (Normale
Prüfung, Einfach-Stichproben)
VII-A Rückzuweisende Qualitätsgrenzlage (als
Anteil fehlerhafter Einheiten in %) für P[a] = 5 %
(Normale Prüfung, Einfach-Stichproben)
VII-B Rückzuweisende Qualitätsgrenzlage (als
Fehler je 100 Einheiten) für P[a] = 5 % (Normale
Prüfung, Einfach-Stichproben)
VIII Grenzzahlen für den Übergang auf reduzierte
Prüfung
IX Kurven für den durchschnittlichen
Stichprobenumfangbei Doppel- und Mehrfach-Stichproben
Stichprobenanweisungen und Operationscharakteristiken
(Diagramme und Tabellenwerte)
X-A für den Kennbuchstaben A
X-B für den Kennbuchstaben B
X-C für den Kennbuchstaben C
X-D für den Kennbuchstaben D
X-E für den Kennbuchstaben E
X-F für den Kennbuchstaben F
X-G für den Kennbuchstaben G
X-H für den Kennbuchstaben H
X-J für den Kennbuchstaben J
X-K für den Kennbuchstaben K
X-L für den Kennbuchstaben L
X-M für den Kennbuchstaben M
X-N für den Kennbuchstaben N
X-P für den Kennbuchstaben P
X-Q für den Kennbuchstaben Q
X-R für den Kennbuchstaben R
X-S für den Kennbuchstaben S
Alphabetisches Verzeichnis der Begriffe
Erläuterungen
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| CECC 00007 : 1978 | Corresponds |
| DIN 9264-2:1988-12 | AEROSPATE; BONDING STRIP, ELECTRICAL, 150 AND 260 DEG C; TECHNICAL SPECIFICATION |
| DIN 13098-2:1988-11 | SINGLE USE PLASTICS SYRINGES FOR MEDICAL PURPOSES - SYRINGES FOR PRESSURE INFUSION APPARATUS - DIMENSIONS, REQUIREMENTS, TESTING |
| DIN 45921-103:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY |
| DIN 65427-2:1991-09 | AEROSPACE; AROMATIC POLYAMIDE (ARAMID); FABRIC WOVEN FROM HIGH-MODULUS FILAMENT YARN; TECHNICAL SPECIFICATION |
| DIN 65147-2:1987-04 | AEROSPACE; CARBON FIBRES; FABRIC OF CARBON FIBRE FILAMENT YARN; TECHNICAL SPECIFICATION |
| DIN 65060:1991-07 | AEROSPACE; TEXTILE GLASS, TEXTILE GLASS FILAMENT ROVINGS FOR REINFORCEMENT OF PLASTICS; TECHNICAL SPECIFICATION |
| BWB TL 5960-0006 : 1ED 1989 | GENERAL CONDITIONS FOR THE SUPPLY OF ELECTRON AND CASCADE TUBES |
| DIN 65210-2:1987-11 | AEROSPACE; HOSE ASSEMBLIES FOR NOMINAL PRESSURES UP TO 210 BAR; TECHNICAL SPECIFICATION FOR HOSE FITTINGS |
| DIN 65360:1992-02 | AEROSPACE; ROLLER CHAINS; TECHNICAL SPECIFICATION |
| DIN 65112:1985-02 | Aerospace; threaded inserts, locked and screw locking; technical specification |
| DIN 65035:1993-11 | AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOY STOCK, FORGINGS AND RINGS; TECHNICAL SPECIFICATION |
| DIN 61853-1:1987-04 | TEXTILE GLASS; TEXTILE GLASS MATS FOR PLASTICS REINFORCEMENT; TECHNICAL DELIVERY CONDITIONS |
| DIN 45921-203;CECC 40201-004:1983-10 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED POWER RESISTORS WIREWOUND, VITREOUS ENAMELLED, AXIAL LEADS, ASSESSMENT LEVEL "S" |
| VDE 0560-62 : 1994 | CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - PERFORMANCE REQUIREMENTS |
| DIN 65212:1988-11 | AEROSPACE; INSTRUMENTATION LOW PRESSURE HOSES; TECHNICAL SPECIFICATION |
| DIN EN 61049 : 1994 | CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - PERFORMANCE REQUIREMENTS |
| VDE 0420-1 : 94 AMD 2 99 | ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL |
| DIN 1057-2:1985-07 | BUILDING MATERIALS FOR FREE-STANDING CHIMNEYS - LINING BLOCKS - REQUIREMENTS, TESTING, INSPECTION |
| DIN 45921-109:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY, METAL GLAZE TYPE |
| DIN 45921-107:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE WOUND RESISTORS, HIGH STABILITY WITH LOW TEMPERATURE COEFFICIENT |
| DIN 43539-2:1983-04 | ACCUMULATORS; TEST METHODS, STARTER BATTERIES FOR STARTING, LIGHTING AND IGNITION |
| DIN 65030:1997-01 | AEROSPACE - SOLDERLESS TUBE FITTINGS WITH COUPLING SLEEVES, FLAVELESS - TECHNICAL SPECIFICATION |
| BWB TL 6650-0026 : 2ED 1994 | VISION BLOCK FOR ARMOURED ENGINEER TANK 2 |
| DIN 45921-1019:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS - CHIP RESISTORS, HIGH STABILITY WITH LOW TEMPERATURE COEFFICIENT ASSESSMENT LEVEL "S", STABILITY CLASS 1 |
| BWB TL 7360-0031 : 2ED 1998 | FIELD KITCHEN TRAILER, ASSEMBLY |
| VDE 0884 : 1987 | OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK, REQUIREMENTS, TESTS |
| BWB TL 4310-0037 : 1ED 1986 | AIR COMPRESSOR, 0.44 CBM/MIN, 240/345 BAR, ELECTRIC MOTOR |
| DIN 29965:1992-11 | AEROSPACE - CARBON FIBRES - CARBON FIBRE FILAMENT YARNS - TECHNICAL SPECIFICATION |
| DIN 65452:1988-08 | AEROSPACE; SPOTLIGHTS WITH 100 MM, 134 MM AND 200 MM EFFECTIVE DIAMETER; TECHNICAL SPECIFICATION |
| DIN 60850-2:1987-03 | TEXTILE GLASS; GLASS FILAMENT YARNS; TECHNICAL DELIVERY CONDITIONS |
| DIN 45921-108;CECC 40101-033:1983-09 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY |
| DIN 65213:1988-05 | AEROSPACE; HOSES FOR SLEEVE ATTACHMENT FOR NOMINAL PRESSURES UP TO 35 BAR; TECHNICAL SPECIFICATION |
| DIN 17410:1977-05 | MATERIALS FOR PERMANENT MAGNETS - TECHNICAL CONDITIONS OF DELIVERY |
| DIN 57418-6 : 1983 | ELEKTRIZITAETSZAEHLER - WECHSELSTROM-WIRKVERBRAUCHSZAEHLER KLASSE 2 FUER DIREKTEN ANSCHLUSS ANNAHME- UND KONFORMITAETSPRUEFUNG |
| I.S. 301:1984 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES - GUIDE TO THE USE OF SINGLE SAMPLING PLANS |
| DIN VDE 0820-5 : 1992 | MINIATURE FUSES; PART 5: GUIDELINES FOR QUALITY ASSESSMENT OF MINIATURE FUSE-LINKS |
| DIN 40680-1:1983-08 | CERAMIC COMPONENTS FOR ELECTRICAL PURPOSES - ADMISSIBLE TOLERANCES |
| DIN 65587:1992-12 | AEROSPACE; WEBBING; TECHNICAL SPECIFICATION |
| BWB TL 4030-0009 : 1ED 1988 | SHACKLE, ANCHOR, NON-MAGNETIZABLE |
| DIN 2950:1983-04 | MALLEABLE CAST IRON FITTINGS |
| DIN 65359:1990-07 | Aerospace; shielded electrical cables, copper conductors, insulated shield, one to four conductors, 600 V, 105 ?C; technical specification |
| DIN 65067-1:1980-12 | AEROSPACE; SANDWICH STRUCTURES WITH TOP LAYERS OF FIBRE REINFORCED PLASTICS, TECHNICAL SPECIFICATION |
| DIN 29782:1988-07 | Aerospace; wire thread inserts; free running or screw-locking; technical specification |
| DIN 65590:1992-12 | AEROSPACE; BRAIDED CORD; TECHNICAL SPECIFICATION |
| DIN 65237:1996-09 | Aerospace - Spherical plain bearings, steel on steel - Technical specification; inactive for new design |
| DIN 45921-402:1992-09 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIREWOUND RESISTORS; CHIP RESISTORS, HIGH STABILITY WITH LOW TEMPERATURE COEFFICIENT; ASSESSMENT LEVEL "S", STABILITY CLASS 2 |
| DIN 45921-403:1992-09 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS - CHIP RESISTORS, CYLINDRICAL, HIGH STABILITY WITH LOW TEMPERATURE COEFFICIENT, ASSESSMENT LEVEL "S" |
| BWB TL 6230-0086 : 1ED 1992 | HEAD-MOUNTED WORKING LIGHT, EXPLOSION-PROOF, CHARGEABLE, 230 V AC |
| DIN 65210-3:1987-11 | AEROSPACE; HOSE ASSEMBLIES FOR NOMINAL PRESSURES UP TO 210 BAR; TECHNICAL SPECIFICATION FOR COMPLETE HOSE ASSEMBLIES |
| BWB TL 8100-0026 : 8ED 1992 | PACKING OF PAINT MATERIALS AND SIMILAR PRODUCTS, AND MARKING OF PACKAGES - PACKING LEVEL C AND H |
| DIN 55303-2:1984-05 | STATISTICAL INTERPRETATION OF DATA; TESTS AND CONFIDENCE INTERVALS RELATING TO EXPECTATIONS AND VARIANCES |
| DIN 2828:1994-02 | CAM LOCKING COUPLINGS FOR HOSE ASSEMBLIES - NOMINAL PRESSURE 10 |
| DIN 13150-1:1991-06 | MEDICAL SYRINGES - REQUIREMENTS ON THE MEASURING SECURITY OF SYRINGS WITH SCALE - CONFORMITY TESTING AND CONFORMITY CERTIFICATION |
| DIN 60060-1:1991-10 | WEBBING LOAD RESTRAINT ASSEMBLIES MADE FROM SYNTHETIC FIBRES FOR USE ON COMMERCIAL VEHICLES |
| DIN 13098-1:1992-05 | SINGLE USE PLASTICS SYRINGES FOR MEDICAL PURPOSES - SINGLE USE PLASTICS SYRINGES FOR GENERAL USE - DIMENSIONS, REQUIREMENTS, TEST |
| DIN 15155:1986-12 | PALLETS - BOX PALLET WITH MESH SIDE PANELS AND 2 FRONTSIDE FLAPS |
| DIN 45910-125:1992-04 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION: NON-POLAR ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE DC 40 TO 100 V (SUITABLE TO VAC LOAD WITHOUT USING A POLARIZING POTENTIAL), GENERAL PURPOSE GRADE, CYLINDRICAL METAL CASE WITH INSULATION SLEEVE, AXIAL WIRE LEADS, CLIMATIC CATEGORY 40/085/056 |
| DIN 45921-106:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY WITH LOW DRIFT AND LOW FAILURE-RATE |
| DIN 45910-128 : 1992 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION; POLAR ALUMINIUM, ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE 16 TO 350 V D.C. LONG-LIFE GRADE CYLINDRICAL METAL CASE, SOLDER TAGS OR SCREW TERMINALS |
| DIN 58993:1991-02 | RUBBER LATEX CONDOMS; REQUIREMENTS AND TESTING |
| DIN 65422-2:1985-12 | AEROSPACE; ANTI-COLLISION LIGHT; TECHNICAL SPECIFICATION |
| DIN 65066:1991-08 | AEROSPACE; TEXTILE GLASS; WOVEN GLASS FILAMENT FABRIC; TECHNICAL SPECIFICATION |
| DIN 9254-2:1986-10 | AEROSPACE - SINGLE CONDUCTOR WIRES, WITH COPPER CONDUCTOR FOR CONNECTOR BOXES AND EQUIPMENT, 600 VOLT, 200 DEGREES C, TECHNICAL SPECIFICATION |
| DIN 17458:1985-07 | SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 61037 : 1994 AMD 2 1999 | ELECTRONIC RIPPLE CONTROL RECEIVERS FOR TARIFF AND LOAD CONTROL |
| DIN 61855-1:1987-04 | TEXTILE GLASS; GLASS ROVING FOR PLASTICS REINFORCEMENT; TECHNICAL DELIVERY CONDITIONS |
| BWB TL 6105-0001 : 4ED 1991 | MOTOR, AC, 440 V, 60 HZ, 3 PHASE, IP 44 |
| DIN VDE 0884 : 1987 | OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK; REQUIREMENTS, TEST |
| DIN 61360-2:1986-03 | SYNTHETIC FIBRE LIFTING SLINGS - SAFETY REQUIREMENTS AND TESTING |
| DIN 41848-1:1983-07 | INTEGRATED FILM CIRCUITS; TERMS AND DEFINITIONS |
| DIN 55303-5:1987-02 | STATISTICAL INTERPRETATION OF DATA; DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
| DIN IEC 60384-1:1991-11 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| DIN 45921-102:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, STANDARD STABILITY |
| DIN 45921-105:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, CARBON COMPOSITION TYPE, STANDARD STABILITY |
| DIN 65210-1:1987-11 | AEROSPACE; HOSE ASSEMBLIES FOR NOMINAL PRESSURE UP TO 210 BAR; TECHNICAL SPECIFICATION FOR HOSES |
| DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.