DIN 30674-3:2001-03
Current
The latest, up-to-date edition.
SHEATHING DUCTILE CAST IRON PIPES - PART 3: ZINC COATING WITH PROTECTIVE SHEATHING
Hardcopy , PDF
German, English
01-01-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Bezeichnung
5 Anforderungen
5.1 Rohroberflächen
5.2 Zink-Überzug
5.2.1 Zinkbeschaffenheit
5.2.2 Beschaffenheit des Zink-Überzuges
5.3 Deckbeschichtung
5.3.1 VerzinkteRohroberfläche
5.3.2 Beschaffenheit der Beschichtungsstoffe
5.3.3 Fertige Deckbeschichtung
6 Prüfungen
6.1 Rohroberflächen
6.2 Zink-Überzug
6.2.1 Zinkbeschaffenheit
6.2.2 Beschaffenheit des Zink-Überzuges
6.3 Deckbeschichtung
6.3.1 VerzinkteRohroberfläche
6.3.2 Beschaffenheit der Beschichtungsstoffe
6.3.3 Fertige Deckbeschichtung
7 Prüfumfang
8 Kennzeichnung
This standard is included in DIN Handbook 143, 286/3. Specifies the requirements and test methods for zinc coatings with protective covering applied by spraying in the manufacturer's works for underground ductile cast iron pipes in accordance with DIN 28600 or DIN 19690 of use at constant operating pipes in accordance with DIN 28600 or DIN 19690 of use at constant operating temperatures up to 50 degree C.
| DevelopmentNote |
Supersedes DIN 30674-4 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| DIN HDBK 143 : 6ED 2002 | STANDARDS FOR CORROSION PROTECTION OF STEEL BY ORGANIC AND METALLIC COATINGS 1 - DIN 267-10 TO DIN 80200 |
| DIN 19630:1982-08 | GUIDELINES FOR THE CONSTRUCTION OF WATER PIPELINES - DVGW CODE OF PRACTICE |
| DIN 50929-1:2016-05 (Draft) | CORROSION OF METALS - CORROSION LIKELIHOOD OF CORROSION OF METALLIC MATERIALS WHEN SUBJECT TO CORROSION FROM THE OUTSIDE - PART 1: GENERAL |
| DIN 1988-200:2012-05 | Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice |
| DIN 28600:1983-01 | DUCTILE IRON PRESSURE PIPES AND FITTINGS FOR GAS AND WATER PIPELINES - TECHNICAL DELIVERY CONDITIONS |
| DIN 50902:1994-07 | COATINGS FOR CORROSION PROTECTION OF METALS; VOCABULARY, PROCESSES AND SURFACE PREPARATION |
| DIN HDBK 286/3 : 2ED 2012 | KORROSIONSSCHUTZ DURCH BESCHICHTUNGEN UND UEBERZUEGE 3 - KONTINUIERLICH HERGESTELLTE, KORROSIONSGESCHUETZTE HALBZEUGE UND ROHRE |
| DIN 1988-7:2004-12 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
| EN 598:2007+A1:2009 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods |
| DVGW W 270 : 2007 | MICROBIAL ENHANCEMENT ON MATERIALS TO COME INTO CONTACT WITH DRINKING WATER - TESTING AND ASSESSMENT |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| DIN EN 969:2009-07 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS |
| DIN 50902:1994-07 | COATINGS FOR CORROSION PROTECTION OF METALS; VOCABULARY, PROCESSES AND SURFACE PREPARATION |
| DIN EN 1179:2003-09 | ZINC AND ZINC ALLOYS - PRIMARY ZINC |
| DIN 53215:2014-04 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE NON-VOLATILE MATTER CONTENT OF BITUMINOUS COATING MATERIALS |
| EN 969:2009 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| DIN 52005:2015-10 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF ASH |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| EN 1179:2003 | Zinc an zinc alloys - Primary zinc |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| DIN EN 1426:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| DIN 53213-1:1978-04 | TESTING OF PAINTS, VARNISHES AND SIMILAR PRODUCTS CONTAINING SOLVENTS - FLASHPOINT TEST USING CLOSED CUP, DETERMINATION OF FLASHPOINT |
| EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| DIN EN 598:2009-10 | Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009) |
| DIN EN 1427:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE SOFTENING POINT - RING AND BALL METHOD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.