DIN 28600:1983-01
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DUCTILE IRON PRESSURE PIPES AND FITTINGS FOR GAS AND WATER PIPELINES - TECHNICAL DELIVERY CONDITIONS
Available format(s)
Hardcopy , PDF
Superseded date
01-01-1995
Superseded by
Language(s)
English
Published date
01-12-2013
The technical delivery conditions apply both to gas and water pipelines if the conditions are printed over the whole width of the page.
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 2531:2009 | Similar to |
| DIN 8573-1:1983-01 | FILLER METALS FOR WELDING UNALLOYED AND LOW ALLOY CAST IRON MATERIALS; DESIGNATION; TECHNICAL DELIVERY CONDITIONS |
| DIN 30674-1:1982-09 | COATING OF DUCTILE CAST IRON PIPES - POLYETHYLENE COATING |
| DIN 4279-3:1990-06 | INTERNAL PRESSURE TEST OF PRESSURE PIPE-LINES FOR WATER; DUCTILE CAST IRON PRESSURE PIPES AND STEEL PIPES, WITH CEMENT MORTAR LINING |
| DIN 28607:1990-01 | PN 40 FLANGES FOR DUCTILE IRON PRESSURE PIPES AND FITTINGS IN WATER PIPELINES - DIMENSIONS AND MASS |
| DIN 28630:1990-01 | DUCTILE IRON DOUBLE SOCKET TEES WITH FLANGE BRANCH FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28639:1990-01 | DUCTILE IRON DOUBLE-FLANGED 45 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 30674-4:1983-05 | COATING OF DUCTILE CAST IRON PIPES - BITUMEN COATING |
| DIN 30674-3:2001-03 | SHEATHING DUCTILE CAST IRON PIPES - PART 3: ZINC COATING WITH PROTECTIVE SHEATHING |
| DIN 28614:1990-01 | DUCTILE IRON PIPES WITH CAST-ON FLANGES FOR USE WITH GAS AND WATER PIPELINES - DIMENSIONS AND MASS |
| DIN 28627:1990-01 | DUCTILE IRON DOUBLE SOCKET 30 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28637:1990-01 | DUCTILE IRON DOUBLE-FLANGED 90 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28632:1990-01 | DUCTILE IRON DOUBLE SOCKET TEES WITH SOCKET BRANCH FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28645:1990-01 | DUCTILE IRON DOUBLE-FLANGED TAPERS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28605:1990-01 | PN 16 FLANGES FOR DUCTILE IRON PRESSURE PIPES AND FITTINGS IN GAS AND WATER PIPELINES - DIMENSIONS AND MASS |
| DIN 28629:1990-01 | DUCTILE IRON DOUBLE SOCKET 11 1/2 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28638:1990-01 | DUCTILE IRON DOUBLE-FLANGED 90 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28601-1:1976-03 | DUCTILE CAST IRON PIPES AND SPECIAL CASTINGS FOR PRESSURE MAIN LINES - SCREWED-GLAND FLEXIBLE JOINT, ASSEMBLY, SOCKETS, SCREW-RINGS |
| DIN 28623:1990-01 | DUCTILE IRON FLANGED SPIGOT PIECES FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28602-3:1976-03 | DUCTILE CAST IRON PIPES AND SPECIAL CASTINGS FOR PRESSURE MAIN LINES - BOLTED-GLAND FLEXIBLE JOINT, BOLTS AND NUTS |
| DIN 28624:1990-01 | DUCTILE IRON COLLARS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 50049:1992-04 | METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS |
| DIN 3535-3:1986-04 | SEALS FOR GAS SUPPLY MATERIALS FOR SEALS OF RUBBER GAS SUPPLY MAINS AND PIPELINES, REQUIREMENTS AND TESTS OF MATERIALS |
| DIN 28601-2:1976-03 | DUCTILE CAST IRON PIPES AND SPECIAL CASTINGS FOR PRESSURE MAIN LINES - SCREWED-GLAND FLEXIBLE JOINT, SEALING RINGS |
| DIN 1693-1:1973-10 | CAST IRON WITH NODULAR GRAPHITE - UNALLOYED AND LOW ALLOY GRADES |
| DIN 28602-2:1976-03 | DUCTILE CAST IRON PIPES AND SPECIAL CASTINGS FOR PRESSURE MAIN LINES - BOLTED-GLAND FLEXIBLE JOINT, SEALING RINGS |
| DIN 28604:1990-01 | PN 10 FLANGES FOR DUCTILE IRON PRESSURE PIPES AND FITTINGS IN GAS AND WATER PIPELINES - DIMENSIONS AND MASS |
| DIN 50145:1975-05 | TESTING OF METALLIC MATERIALS; TENSILE TEST |
| DIN 28622:1990-01 | DUCTILE IRON FLANGED SOCKET PIECES FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28628:1990-01 | DUCTILE IRON DOUBLE SOCKET 22 1/2 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 50104:1983-11 | TESTING OF HOLLOW BODIES BY INTERNAL PRESSURE; LEAK DETECTION UP TO A CERTAIN PRESSURE VALUE; GENERAL SPECIFICATIONS |
| DIN 30674-1:1982-09 | COATING OF DUCTILE CAST IRON PIPES - POLYETHYLENE COATING |
| DIN 30674-2:1992-10 | CEMENT MORTAR COATINGS FOR DUCTILE IRON PIPES - REQUIREMENTS AND TESTING |
| DIN 28646:1990-01 | DUCTILE IRON BLANK FLANGES FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 50136:1979-06 | TESTING OF METALLIC MATERIALS; FLATTENING TEST ON TUBES |
| DIN 28625:1990-01 | DUCTILE IRON DOUBLE SOCKET 90 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28643:1990-01 | DUCTILE IRON ALL-FLANGED TEES FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28634:1990-01 | DUCTILE IRON DOUBLE SOCKET TAPERS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 28610-1:1983-01 | DUCTILE IRON PRESSURE PIPES WITH SOCKET WITH CEMENT-MORTAR LINING FOR GAS AND WATER PIPELINES - DIMENSIONS AND MASSES |
| DIN 28617:1976-05 | SEALING RINGS FOR CAST IRON PRESSURE PIPES AND FITTINGS FOR WATER SUPPLY - TECHNICAL SPECIFICATIONS FOR DELIVERY |
| DIN 28606:1990-01 | PN 25 FLANGES FOR DUCTILE IRON PRESSURE PIPES AND FITTINGS IN WATER PIPELINES - DIMENSIONS AND MASS |
| DIN 28610-2:1983-01 | DUCTILE IRON PRESSURE PIPES WITH SOCKET FOR GAS AND WATER PIPELINES RATED FOR PRESSURES OVER 4 BAR UP TO AND INCLUDING 16 BAR - DIMENSIONS AND MASSES |
| DIN 28648:1990-01 | DUCTILE IRON CASTINGS FOR GAS AND WATER PRESSURE PIPELINES - EN-FITTINGS - SOCKET 1/4 DUCKFOOT BENDS - APPLICATION, DIMENSIONS AND MASSES |
| DIN 28626:1990-01 | DUCTILE IRON DOUBLE SOCKET 45 DEGREE BENDS FOR USE WITH GAS AND WATER PIPES - DIMENSIONS AND MASS |
| DIN 50351:1985-02 | TESTING OF METALLIC MATERIALS - BRINELL HARDNESS TEST |
| DIN 28603:2002-05 | DUCTILE IRON PIPES AND FITTINGS - PUSH-IN JOINTS - SURVEY, SOCKETS AND GASKETS |
| DIN 19630:1982-08 | GUIDELINES FOR THE CONSTRUCTION OF WATER PIPELINES - DVGW CODE OF PRACTICE |
| DIN 28602-1:1976-03 | DUCTILE CAST IRON PIPES AND SPECIAL CASTINGS FOR PRESSURE MAIN LINES - BOLTED-GLAND FLEXIBLE JOINT, ASSEMBLY, SOCKETS, COUNTER RINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.