DIN 28130:2007-07
Current
Current
The latest, up-to-date edition.
CHEMICAL EQUIPMENT - SURVEY ON COMPONENTS OF AGITATOR VESSELS WITH AGITATION UNIT
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Übersicht
3.1 Formen
3.2 Bauteile
3.2.1 Rührbehälter
3.2.2 Bauteile für Heizen/Kühlen
3.2.3 Tragelemente der Rührbehälter
3.2.4 Transport- und Montagehilfen
3.2.5 Anschweissteile an Rührbehälter aus Stahl,
emailliert
3.2.6 Zubehör
3.2.7 Rührantrieb
Anhang A (informativ) Festlegungs- und Beschreibungsschema
Literaturhinweise
Bilder
Tabellen
Diese Norm gibt einen Überblick über die vorhandenen Normen der Bauteile und deren Varianten an Rührbehältern aus unlegiertem Stahl, nichtrostendem Stahl und aus Stahl, emailliert.
| DevelopmentNote |
Supersedes DIN 28130-1, DIN 28130-2, DIN 28130-3 and DIN 28130-3 SUPP 1. (07/2007)
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| DIN 28006-2:2016-05 (Draft) | GENERAL TOLERANCES FOR AGITATOR VESSELS - PART 2: GLASS LINED AGITATOR VESSELS |
| DIN 28145-6:1979-09 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS; BRACKET |
| DIN 28145-2:1985-06 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS - SUPPORTS FOR DAVITED AND HINGED FLAT COVERS - LOCATING AND CONNECTING DIMENSIONS |
| DIN 28140-1:2005-01 | Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10 |
| DIN 28137-2:2005-01 | Mounting flanges for agitation units - Part 2: Typ E for glass lined vessels |
| DIN 28148:1992-01 | PTFE ENVELOPE GASKETS FOR GLASS LINED AGITATOR VESSELS |
| DIN 28147:1985-04 | GLASS LINED THERMOPOCKETS FOR AGITATOR VESSELS - MOUNTING DIMENSIONS |
| DIN 28156:1981-07 | SHAFT END FOR AGITATORS OF CARBON AND STAINLESS STEEL, FOR STUFFING BOXES; DIMENSIONS |
| DIN 28139-2:1985-06 | WELDING NECKS FOR GLASS LINED VESSELS - FORM M MANHOLE, HANDHOLE AND ASSEMBLY OPENING FOR CLAMP SCREW CONNECTIONS - CONNECTING, DIMENSIONS |
| DIN 28084-3:1996-06 | SUPPORT RINGS AND RING SUPPORTS ON APPARATUS - PART 3: DIMENSIONS, MAXIMUM SERVICE WEIGHT FOR ON NON-ALLOY AND STAINLESS STEEL AGITATOR VESSELS |
| DIN 28157:1992-01 | ONE PIECE GLASS LINED IMPELLER AGITATOR - DIMENSIONS |
| DIN 28140-2:2005-01 | CONNECTIONS FOR BOTTOM DISCHARGE VALVES - PART 2: ON GLASS LINED STEEL - CONNECTING DIMENSIONS PN 10 |
| DIN 28120:2004-06 | Circular sight glasses with case in main power connection |
| DIN 28006-1:2009-10 | TOLERANCES AND LIMIT DEVIATIONS FOR AGITATOR VESSELS - PART 1: AGITATOR VESSELS OF METALLIC MATERIALS |
| DIN 28081-2:2015-06 | SUPPORTS FOR VESSELS - PART 2: STEEL PROFILE SUPPORTS FOR VESSELS |
| DIN 28145-4:1993-12 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS - SUPPORT RINGS |
| DIN 28083-1:1987-01 | BRACKET SUPPORTS - DIMENSIONS AND MAXIMUM LOADS |
| DIN 28163:1983-10 | STUFFING BOX FOR AGITATOR SHAFTS OF CARBON AND STAINLESS STEEL |
| DIN 28034:2013-09 | Flange joints for process vessels - Weld-neck flanges for pressurized vessels |
| DIN 28162-1:1983-10 | AGITATOR GEAR STOOLS FOR AGITATOR DRIVES WITH A ROTATING MECHANICAL SEAL |
| DIN 28030-1:2013-09 | Flange joints for process vessels - Part 1: Technical delivery conditions |
| DIN 28084-2:1996-06 | SUPPORT RINGS AND RING SUPPORTS ON APPARATUS - PART 2: TYPES, DIMENSIONS, CALCULATION OF THICKNESS |
| DIN 28152-1:1999-11 | Clamps for glass lined vessels - Part 1: Dimensions, assignment |
| DIN 28081-3:1985-09 | TYPE B TUBULAR VESSEL SUPPORTS - MAXIMUM PERMISSIBLE LOADS ON TUBULAR SUPPORTS FOR DISHED ENDS |
| DIN 28139-3:1985-06 | WELDING NECKS FOR GLASS LINED VESSELS - FORM S NOZZLES FOR LAPPED DIVIDED FLANGE CONNECTIONS - CONNECTING DIMENSIONS |
| DIN 28013:2012-06 | ELLIPSOIDAL HEADS |
| DIN 28136-1:2005-12 | AGITATOR VESSELS - PART 1: PRINCIPAL DIMENSIONS |
| DIN 28121:2004-06 | Circular sight glasses with case in metal to metal contact type flanged joint |
| DIN 28086:1994-06 | Lugs on vessels for use in process engineering - Dimensions and maximum safe working load |
| DIN 28025:2003-02 | NOZZLES OF STAINLESS STEEL - PN 10 TO PN 40 |
| DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
| DIN 28084-1:1996-06 | SUPPORT RINGS AND RING SUPPORTS ON APPARATUS - PART 1: CALCULATION OF STABILITY |
| DIN 28145-5:1995-11 | PARTS WELDED TO GLASS LINED STEEL AGITATOR VESSELS - PART 5: INSULATION COLLAR AT THE BOTTOM DISCHARGE OPENING |
| DIN 28158:1984-01 | ONE PIECE GLASS LINED ANCHOR AGITATOR - DIMENSIONS |
| DIN 28138-1:2006-06 | ROTATING MECHANICAL SEALS FOR AGITATOR SHAFTS - PART 1: CARBON OR STAINLESS STEEL - OPERATING DATA, ASSEMBLY DIMENSIONS |
| DIN 28137-1:2015-03 | MOUNTING FLANGES FOR AGITATION UNITS - PART 1: FOR VESSELS OF STEEL |
| DIN 28083-2:1987-01 | BRACKET SUPPORTS - MAXIMUM BENDING MOMENTS IMPOSED ON THE VESSEL WALL RESULTING FROM TYPE A BRACKET SUPPORT LOADS |
| DIN 28146:1998-06 | GLASS LINED STEEL BAFFLES FOR AGITATOR VESSELS - MOUNTING DIMENSIONS |
| DIN 28040:2013-09 | Flange joints for process vessels - Flat gaskets |
| DIN 28145-3:1993-09 | PARTS WELDED TO GLASS LINED AGITATOR VESSELS - POSITION AND SIZE OF LIFTING LUGS |
| DIN 28081-1:2015-06 | SUPPORTS FOR VESSELS - PART 1: TUBULAR SUPPORTS FOR VESSELS |
| DIN 28125-1:1989-08 | DN 150 TO DN 600 ROUND HINGED CLOSURES |
| DIN 28149:1991-09 | PROTECTIVE SLEEVE FOR THERMOTIPS FOR AGITATOR VESSELS - CONNECTING DIMENSIONS |
| DIN 28144:2006-12 | AGITATOR ASSEMBLY FOR TWO PIECE GLASS LINED STEEL AGITATORS - DIMENSIONS |
| DIN 28155:1992-02 | FLANGED COUPLINGS FOR CARBON AND STAINLESS STEEL AGITATOR SHAFTS - COUPLING IN THE AGITATOR VESSEL - DIMENSIONS |
| DIN 28030-2:2013-09 | Flange joints for process vessels - Part 2: Limit deviations for flanges |
| DIN 28138-2:2006-06 | ROTATING MECHANICAL SEALS FOR AGITATOR SHAFTS - PART 2: STEEL, GLASS-LINED - OPERATING DATA, ASSEMBLY DIMENSIONS |
| DIN 116:1971-12 | MOTOR ELEMENTS - FLANGE COUPLINGS, PRINCIPAL MEASURES, TWISTING MOMENTS, NUMBER OF REVOLUTIONS |
| DIN 28131:1992-09 | AGITATORS AND BAFFLES FOR AGITATOR VESSELS - TYPES, TERMS AND MAIN DIMENSIONS |
| DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
| DIN 28154:1983-10 | Shaft end for carbon and stainless steel agitators, for rotating mechanical seals; dimensions |
| DIN 28136-2:2005-12 | AGITATOR VESSELS - PART 2: POSITIONS AND SIZES OF COVER NOZZLES IN NON-ALLOY AND STAINLESS STEEL VESSELS |
| DIN 28127:1987-03 | FLOW FUNNELS FOR HALF-PIPE COIL JACKETS FOR VESSELS |
| DIN 28036:2005-06 | WELD FLANGES FOR PRESSURE VESSELS AND PROCESS APPARATUS OF STAINLESS STEEL |
| DIN 28128:2011-08 | Half-pipe coil jackets for process equipment |
| DIN 28141:2003-11 | CONNECTING FLANGES FOR VESSELS AND PROCESS APPARATUS OF NON-ALLOY AND STAINLESS STEEL |
| DIN 28159:2006-12 | SHAFT END FOR EXTERNALLY COUPLED GLASS LINED STEEL AGITATORS - DIMENSIONS |
| DIN 28124-1:2010-09 | Manhole closures - Part 1: For unpressurized vessels |
| DIN 115-1:1973-09 | DRIVING COMPONENTS - CLAMP COUPLINGS, DIMENSIONS, TWISTING MOMENTS, NUMBER OF REVOLUTIONS |
| DIN 28138-3:2006-06 | ROTATING MECHANICAL SEALS FOR AGITATOR SHAFTS - PART 3: CONNECTIONS FOR BARRIES FLUIDS, COOLING, CONTROL AND MOUNTING AND DESIGNATION SYSTEM FOR ROTATING MECHANICAL SEALS |
| DIN 28150:1992-08 | DIVIDED LAPPED FLANGE FOR GLASS LINED WELDING NECKS - PN 10 |
| DIN 28151:1999-11 | Arrangement and size of jacket nozzles on glass-lined steel mixing vessels for use in process engineering |
| DIN 28115:2003-02 | CARBON STEEL NOZZLES - PN 10 TO PN 40 |
| DIN 28087:1994-05 | Top head type lifting lugs on apparatuses for mounting; dimensions and allowable loadings |
| DIN 28124-3:2013-07 | Manhole closures - Part 3: For pressure, covered |
| DIN 28136-3:2005-12 | AGITATOR VESSELS - PART 3: POSITION AND SIZES OF COVER NOZZLES FOR GLASS LINED STEEL AGITATOR VESSELS |
| DIN 28032:2005-06 | WELD FLANGES FOR PRESSURE VESSELS AND PROCESS APPARATUS OF NON-ALLOY STEEL |
| DIN 28139-1:1985-06 | WELDING NECKS FOR GLASS LINED VESSELS - FORM H MAIN FLANGES FOR CLAMP SCREW CONNECTIONS - DIMENSIONS |
| DIN 82101:2005-09 | Components for lifting, towing, lashing - Shackle, dee - Non-alloy quality steel |
| DIN 28160:2012-02 | SUPPORT RINGS FOR CARBON AND STAINLESS STEEL AGITATOR VESSELS - POSITION |
| DIN 28011:2012-06 | TOROSPHERICAL HEADS |
| DIN 28162-2:1983-10 | AGITATOR GEAR STOOLS FOR AGITATOR DRIVES WITH GLAND SEALING |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN 28124-2:2010-09 | Manhole closures - Part 2: For pressure vessels, from steel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.