DIN 18035-7:2014-10
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPORTS GROUNDS - PART 7: SYNTHETIC TURF AREAS
Available format(s)
Hardcopy , PDF
Superseded date
12-10-2019
Superseded by
Language(s)
English
Published date
01-12-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Material characteristics and descriptive features
6 Testing
7 Test methods
8 Care and maintenance
Annex A (informative) - Construction/design examples
Annex B (informative) - Environmental protection recommendations
Bibliography
This standard is included in DIN HDBK 134-1 and 81.
| DocumentType |
Standard
|
| Pages |
43
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| DIN HDBK 81 : 16ED 2016 | LANDSCHAFTSBAUARBEITEN VOB/STLB-BAU - VOB TEIL C: ATV DIN 18299, ATV DIN 18320 |
| DIN 18320:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - LANDSCAPE WORKS |
| DIN HDBK 134-1 : 9ED 2015 |
| DIN EN ISO 2811-1:2016-08 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| DIN 18196:2011-05 | Earthworks and foundations - Soil classification for civil engineering purposes |
| DIN 53504:2015-08 (Draft) | TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
| DIN EN 933-1:2012-03 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| DIN 18202:2013-04 | TOLERANCES IN BUILDING CONSTRUCTION - BUILDINGS |
| DIN EN ISO 4892-2:2013-06 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| DIN EN 13043:2015-07 (Draft) | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
| EN 14808:2005 | Surfaces for sports areas - Determination of shock absorption |
| DIN EN 1367-1:2007-06 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
| DIN 51451:2004-09 | TESTING OF PETROLEUM PRODUCTS AND RELATED PRODUCTS - ANALYSIS BY INFRARED SPECTROMETRY - GENERAL WORKING PRINCIPLES |
| DIN EN 12620:2015-07 (Draft) | AGGREGATES FOR CONCRETE |
| DIN EN 15330-1:2013-12 | SURFACES FOR SPORTS AREAS - SYNTHETIC TURF AND NEEDLE-PUNCHED SURFACES PRIMARILY DESIGNED FOR OUTDOOR USE - PART 1: SPECIFICATION FOR SYNTHETIC TURF SURFACES FOR FOOTBALL, HOCKEY, RUGBY UNION TRAINING, TENNIS AND MULTI-SPORTS USE |
| DIN EN ISO 11909:2007-05 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| DIN 18125-2:2011-03 | SOIL INVESTIGATION AND TESTING - DETERMINATION OF DENSITY OF SOIL - PART 2: FIELD TESTS |
| DIN 18200:2000-05 | ASSESSMENT OF CONFORMITY FOR CONSTRUCTION PRODUCTS - CERTIFICATION OF CONSTRUCTION PRODUCTS BY CERTIFICATION BODY |
| DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
| DIN EN 12457-4:2003-01 | CHARACTERIZATION OF WASTE - LEACHING - COMPLIANCE TEST FOR LEACHING OF GRANULAR WASTE MATERIALS AND SLUDGES - PART 4: ONE STAGE BATCH TEST AT A LIQUID TO SOLID RATIO OF 10 L/KG FOR MATERIALS WITH PARTICLE SIZE BELOW 10 MM (WITHOUT OR WITH LIMITED SIZE REDUCTION) |
| DIN EN 1097-3:1998-06 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS |
| DIN ISO 4649:2014-03 | Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010) |
| DIN ISO 3310-2:2015-07 | TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 2: TEST SIEVES OF PERFORATED METAL PLATE (ISO 3310-2:2013) |
| DIN EN 1484:1997-08 | WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC) |
| FGSV 535 : 2005 | M GEOK E - MERKBLATT UEBER DIE ANWENDUNG VON GEOKUNSTSTOFFEN IM ERDBAU DES STRASSENBAUES MIT DENCHECKLISTEN FUER DIE ANWENDUNG VON GEOKUNSTSTOFFEN IM ERDBAU DES STRASSENBAUES (C GEOK E) |
| ISO 1407:2011 | Rubber — Determination of solvent extract |
| DIN EN 12616:2013-12 | Surfaces for sports areas - Determination of water infiltration rate |
| DIN 38414-17:2014-04 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - SLUDGE AND SEDIMENTS (GROUP S) - PART 17: DETERMINATION OF THE ORGANICALLY BOUND HALOGENS AMENABLE TO EXTRACTION (EOX) (S 17) |
| DIN EN ISO 6427:2014-08 | PLASTICS - DETERMINATION OF MATTER EXTRACTABLE BY ORGANIC SOLVENTS (CONVENTIONAL METHODS) (ISO 6427:2013) |
| DIN 18123:2011-04 | SOIL, INVESTIGATION AND TESTING - DETERMINATION OF GRAIN-SIZE DISTRIBUTION |
| DIN 53019-1:2008-09 | VISCOMETRY - MEASUREMENT OF VISCOSITIES AND FLOW CURVES BY MEANS OF ROTATIONAL VISCOMETERS - PART 1: PRINCIPLES AND MEASURING GEOMETRY |
| DIN EN ISO 3251:2008-06 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT |
| DIN EN 1969:2000-08 | SURFACES FOR SPORTS AREAS - DETERMINATION OF THICKNESS OF SYNTHETIC SPORTS SURFACES |
| ISO 5893:2002 | Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification |
| DIN ISO 3310-1:2001-09 | TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 1: TEST SIEVES OF METAL WIRE CLOTH (ISO 3310-1:2016) |
| DIN EN ISO 3451-1:2008-11 | PLASTICS - DETERMINATION OF ASH - PART 1: GENERAL METHODS |
| DIN EN ISO 12846:2012-08 | Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012) |
| DIN 18035-3:2006-09 | SPORTS GROUNDS - PART 3: DRAINAGE |
| DIN EN 20105-A02:1994-10 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREY SCALE FOR ASSESSING CHANGE IN COLOUR |
| DIN 18035-5:2007-08 | Sporting grounds - Part 5: Tamped areas |
| DIN EN 933-4:2015-01 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
| DIN EN 14955:2006-01 | Surfaces for sports areas - Determination of composition and particle shape of unbound mineral surfaces for outdoor sports areas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.