DIN 17441:1997-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES
06-01-2000
01-12-2013
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Definitionen
3.1 Nichtrostende Stähle
3.2 Wärmebehandlungsarten
4 Masse und Grenzabmasse
5 Gewichtserrechnung
6 Bezeichnung und Bestellung
7 Anforderungen
7.1 Herstellverfahren
7.2 Leiferzustand
7.3 Chemische Zusammensetzung
7.4 Korrosionschemische Eigenschaften
7.5 Mechanische Eigenschaften
7.6 Oberflächenbeschaffenheit
7.7 Sprödbruchunempfindlichkeit und Kaltzähigkeit
8 Prüfung
8.1 Vereinbarung von Prüfungen und Bescheinigungen
über Materialprüfungen
8.2 Prüfumfang
8.3 Probenahme und Probenvorbereitung
8.4 Durchführung der Prüfungen
8.5 Wiederholungsprüfungen
9 Kennzeichnung
9.1 Umfang der Kennzeichnung
9.2 Art der Kennzeichnung
10 Beanstandungen
Anhang A (informativ) Ergänzende Angaben
Anhang B (informativ) Literaturhinweise
Standard refers to cold rolled strip in thicknesses up to 6mm and widths up to 1600mm, made from stainless steels with a wide range of uses. Sheet and plate cut from strip and to slit strip produced by longitudinal slitting and to rods (strips) cut therefrom. Hot rolled strip, wire rod, plate and sheet, drawn wire, steel bars, forgings and semi-finished products made from stainless steels are specified in DIN 17440, stainless tubes and pipes are contained in DIN 17455 to DIN 17458 CONTAINED IN DIN HDBK 405
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EURONORM 141 : 1979 | Similar to |
| ISO 683-13:1974 | Similar to |
| EURONORM 88 : LATEST | Similar to |
| DIN 6616:1989-09 | HORIZONTAL STEEL TANKS, SINGLE- AND DOUBLE-WALLED, FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
| DIN 68131:1994-05 | CASTORS FOR FURNITURE - CASTORS FOR SWIVELLING CHAIRS AND SWIVELLING EASY CHAIRS - REQUIREMENTS AND TESTING |
| DIN 6618-1:1989-09 | VERTICAL STEEL TANKS, SINGLE-WALLED FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
| DIN 50930-4:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF STAINLESS STEELS |
| DIN 18461:1989-02 | EAVE GUTTERS, EXTERNAL RAINWATER PIPE SECTIONS AND FITTINGS MADE OF METAL - DIMENSIONS, MATERIALS |
| DIN 18160-1:2001-12 | CHIMNEYS - PART 1: DESIGN AND PERFORMANCE |
| DIN 8556-1:1986-05 | FILLER METALS FOR WELDING STAINLESS AND HEAT RESISTANT STEELS; DESIGNATION, TECHNICAL DELIVERY CONDITIONS |
| DIN 18515-1:1998-08 | CLADDING FOR EXTERNAL WALLS - PART 1: TILES FIXED WITH MORTAR - PRINCIPLES OF DESIGN AND APPLICATION |
| DIN 25452:1992-04 | MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS |
| DIN 19565-1:1989-03 | PIPES AN FITTINGS OF GLASS FIBRE REINFORCED PLASTICS (UP-GF) FOR BURIED SEWERS AND DRAINS - CENTRIFUGAL CASTED, FILLED - DIMENSIONS, TECHNICAL TERMS OF DELIVERY |
| ASTM A 947M : 2016 : REDLINE | Standard Specification for Textured Stainless Steel Sheet [Metric] |
| DIN 4133:1991-11 | STEEL STACKS |
| DIN 4702-1:1990-03 | BOILERS FOR CENTRAL HEATING, TERMS, REQUIREMENTS, TESTING, MARKING |
| DIN 6624-1:1989-09 | Horizontal single-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids |
| VDE 0370-8 : 1995 | GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION |
| DIN IEC 60628 : 1995 | GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION |
| DIN 17280:1985-07 | STEELS WITH LOW TEMPERATURE TOUGHNESS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, SHEET, STRIP, WIDE FLATS, SECTIONS, BARS AND FORGINGS |
| DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 50114:1981-08 | TESTING OF METALS; TENSILE TEST ON SHEET OR STRIP LESS THAN 3 MM THICK, NOT USING AN EXTENSOMETER |
| DIN 17456:1999-02 | SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 17014-1:1988-08 | HEAT TREATMENT OF FERROUS MATERIALS - TERMINOLOGY |
| DIN 50049:1992-04 | METALLIC PRODUCTS; TYPES OF INSPECTION DOCUMENTS |
| DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 17010:1985-06 | GENERAL TECHNICAL DELIVERY CONDITIONS FOR STEEL AND STEEL PRODUCTS |
| DIN 17458:1985-07 | SEAMLESS CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 50145:1975-05 | TESTING OF METALLIC MATERIALS; TENSILE TEST |
| DIN 59381:1980-08 | FLAT PRODUCTS OF STEEL; COLD ROLLED STRIP OF STAINLESS STEEL AND OF HEAT RESISTING STEELS; DIMENSIONS, PERMISSIBLE DIMENSIONAL DEVIATIONS, DEVIATIONS OF FORM AND WEIGHT |
| DIN 59382:1975-08 | FLAT STEEL PRODUCTS; COLD ROLLED WIDE STRIP AND SHEET OF STAINLESS STEELS; DIMENSIONS, PERMISSIBLE VARIATIONS ON DIMENSIONS AND FORM |
| DIN 50914:1996-09 | TESTING THE RESISTANCE OF STAINLESS STEELS TO INTERGRANULAR CORROSION - METHOD BY USING COPPER SULFATE AND SULFURIC ACID - STRAUSS TEST |
| DIN 17455:1999-02 | WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 50133:1985-02 | TESTING OF METALLIC MATERIALS; VICKERS HARDNESS TEST, HV 0.2 TO HV 100 |
| DIN 50351:1985-02 | TESTING OF METALLIC MATERIALS - BRINELL HARDNESS TEST |
| DIN 17440:2001-03 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.