DIN 17440:2001-03
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE
Available format(s)
Hardcopy , PDF
Superseded date
09-01-2005
Language(s)
English
Published date
01-01-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Nonnative Verweisungen
3 Begriffe
3.1 Nichtrostende Stähle
4 Masse und Grenzabmasse
5 Gewichtserrechnung und zulässige Gewichtsabweichungen
6 Bezeichnung und Bestellung
7 Anforderungen
7.1 Herstellverfahren
7.2 Lieferzustand
7.3 Chemische Zusammensetzung
7.4 Korrosionschemische Eigenschaften
7.5 Mechanische Eigenschaften
7.6 Oberflächenbeschaffenheit
7.7 Sprödbruchunempfindlichkeit und Kaltzähigkeit
8 Prüfung
8.1 Vereinbarung von Prüfungen und Bescheinigungen über
Materialprüfungen
8.2 Prüfumfang
8.3 Probenahme und Probenvorbereitung
8.4 Durchführung der Prüfungen
8.5 Wiederholungsprüfungen
9 Kennzeichnung
9.1 Umfang der Kennzeichnung
9.2 Art der Kennzeichnung
10 Beanstandungen
Anhang A (informativ) Für Draht aus nichtrostenden Stählen nach
dieser Norm in Betracht kommende Massnorm
Anhang B (informativ) Ergänzende Angaben
Literaturhinweise
This standard is included in DIN Handbook 405. Applies to hot rolled strip, cold or hot rolled plate as rolled, wire rod, drawn wire, steel bars, forgings and semi-finished products made from stainless steels with a wide range of applications. Stainless steel cold rolled strip, slit strip and sheet and plate that has been cut from it, has a wide range of applications, these are specified in DIN 17441, stainless steel tubes and pipes are specified in DIN 17455 to DIN 17458. Can be used in place of SEW 680 (out of print) with regard to stainless steels.
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| EURONORM 88 : LATEST | Corresponds |
| ISO 2604-4:1975 | Corresponds |
| EURONORM 141 : 1979 | Corresponds |
| ISO 2604-1:1975 | Identical |
| ISO 683-13:1974 | Corresponds |
| EURONORM 88 : LATEST | Identical |
| ISO 683-13:1974 | Identical |
| ISO 2604-4:1975 | Identical |
| EURONORM 141 : 1979 | Identical |
| DIN 7957:1983-03 | HARDWARE; FLAP HINGE ROLLED |
| BWB TL 7920-0026 : 1ED 1988 | WIRE BRUSHES FOR FIELD KITCHEN |
| DIN 44427:1995-11 | TEST SOURCE WITH CONTAINER - DIMENSIONS, MATERIALS AND MARKING |
| VDE 0472-807 : 1985 | TESTING OF CABLES, WIRES & FLEXIBLE CORDS - CORROSION |
| DIN 6616:1989-09 | HORIZONTAL STEEL TANKS, SINGLE- AND DOUBLE-WALLED, FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
| DIN 4551:1988-06 | OFFICE FURNITURE; OFFICE SWIVEL CHAIRS; SAFETY REQUIREMENTS, TESTING |
| DIN 8566-2:1984-12 | FILLER METALS FOR THERMAL SPRAYING; SOLID WIRES FOR ARC SPRAYING; TECHNICAL DELIVERY CONDITIONS |
| DIN 4102-15:1990-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - 'BRANDSCHACHT' |
| DIN 8556-1:1986-05 | FILLER METALS FOR WELDING STAINLESS AND HEAT RESISTANT STEELS; DESIGNATION, TECHNICAL DELIVERY CONDITIONS |
| DIN 6618-1:1989-09 | VERTICAL STEEL TANKS, SINGLE-WALLED FOR THE ABOVE-GROUND STORAGE OF WATER-POLLUTING, INFLAMMABLE AND NON-INFLAMMABLE LIQUIDS |
| DIN 17441:1997-02 | STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR COLD ROLLED STRIPS AND SLIT COILS STRIP AND SHEETS CUT FROM SUCH STRIPS FOR PRESSURE PURPOSES |
| DIN 65574:1993-01 | AEROSPACE; NAMEPLATES; DIRECTIONS FOR DESIGN |
| DIN 44921-2:1985-01 | Electric cartridge-type heating elements, with high watt density, metal-sheathed; dimensions |
| DIN 50930-4:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF STAINLESS STEELS |
| DIN 14343:1986-11 | ALUMINIUM ALLOY A-B-ADAPTOR FOR NOMINAL PRESSURE 16 |
| DIN 17455:1999-02 | WELDED CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 4040-1:1989-03 | GREASE INTERCEPTOR SYSTEMS; CONCEPTS, NOMINAL SIZES, REQUIREMENTS AND TESTING |
| DIN 55477:1990-11 | PACKAGING; NON-REINFORCED & REINFORCED PLASTIC TAPES; REQUIREMENTS & TESTING |
| DIN 65118-2:1987-06 | AEROSPACE; WELDED METALLIC COMPONENTS; DIRECTIVES FOR DESIGN |
| DIN 65038-1:1989-08 | AEROSPACE; STEEL, NICKEL- AND COBALT-ALLOYS BARS; TECHNICAL SPECIFICATION |
| DIN 28450-5:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 5: MALE DUST COUPLING |
| DIN 2528:1991-06 | STEEL FLANGES - TECHNICAL DELIVERY CONDITIONS |
| DIN 65523:1984-07 | Aerospace; hexagon bolts, with MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 C |
| DIN 28125-3:1989-04 | HINGED COVERS - CIRCULAR SHAPE WITH PROTECTION RING AND SURFACE COATED - DN 500 AND DN 600 |
| DIN 58946-5:1987-01 | STERILIZATION - STEAM-STERILIZERS, SMALL-STERILIZERS, REQUIREMENTS |
| DIN 9021:1990-03 | WASHERS WITH OUTSIDE DIAMETER CA. 3 X NOMINAL THREAD DIAMETER |
| DIN 3352-10:1979-05 | GATE VALVES OF STAINLESS STEEL |
| DIN 65149:1980-12 | AEROSPACE; SCREWS OF STEEL FOR NON-STRUCTURAL COMPONENTS, M3 AND M4, TECHNICAL SPECIFICATION |
| DIN 40011:1989-08 | ELECTRICAL ENGINEERING - EARTH, PROTECTIVE CONDUCTOR, NOISELESS EARTH - FRAME OR CHASSIS, CLASS 2 EQUIPMENT - GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT |
| VDE 0472-817 : 1992 | TESTING ON CABLES, WIRES AND FLEXIBLE CORDS; RESISTANCE TO WELD SPATTER |
| DIN 42562-1:1987-04 | TRANSFORMERS - DEHYDRATING BREATHER - CAPACITY 1.2 TO 4.8 KG - ASSEMBLY |
| DIN EN 15001-1:2011-02 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN 95366:1996-04 | ELASTOMER MOUNTS - POT BEARINGS AND FAIL SAFE POT BEARINGS, TYPES A TO G |
| DIN 65349:2001-06 | AEROSPACE - TESTING OF LOCKING TORQUES FOR NUTS AND RELATED THREADED PARTS, WITH METRIC SCREW THREAD - TEST METHODS |
| VDE 0151 : 1986 | MATERIALS AND SIZE REQUIREMENTS FOR EARTH ELECTRODES FROM THE CORROSION POINT OF VIEW |
| DIN 43763:1986-03 | MEASUREMENT AND CONTROL - ELECTRICAL TEMPERATURE SENSORS - METAL PROTECTING TUBES FOR THERMOMETERS WITH INSERTED SENSOR UNITS |
| DIN 18160-1:2001-12 | CHIMNEYS - PART 1: DESIGN AND PERFORMANCE |
| DIN 28125-1:1989-08 | DN 150 TO DN 600 ROUND HINGED CLOSURES |
| DIN 7956:1983-07 | HARDWARE; CONTINUOUS HINGE ROLLED |
| DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
| DIN 50914:1996-09 | TESTING THE RESISTANCE OF STAINLESS STEELS TO INTERGRANULAR CORROSION - METHOD BY USING COPPER SULFATE AND SULFURIC ACID - STRAUSS TEST |
| DIN 18799-3:1999-08 | LADDERS FOR CONSTRUCTION WORKS - PART 3: LADDERS FOR CHIMNEYS - SAFETY REQUIREMENTS AND TESTS |
| DIN 28125-2:1989-04 | HINGED COVERS - ELLIPTICAL, 350 MM X 450 MM |
| I.S. 742-1:1986 | DOMESTIC SOLID-FUELLED HEATING APPLIANCES - PART 1: SAFETY |
| DIN 17240:1976-07 | HEAT RESISTING AND HIGHLY HEAT RESISTING MATERIALS FOR BOLTS AND NUTS - QUALITY SPECIFICATIONS |
| DIN EN 1124-1:1999-04 | PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL |
| DIN 1239:1999-02 | COVERINGS FOR WELLS, SPRING WATER CHAMBERS AND OTHER WATER SUPPLY CONSTRUCTION - PRINCIPLES FOR CONSTRUCTION |
| DIN 18515-1:1998-08 | CLADDING FOR EXTERNAL WALLS - PART 1: TILES FIXED WITH MORTAR - PRINCIPLES OF DESIGN AND APPLICATION |
| VDI 3930:1998-05 | Cooling and heating of waste gases |
| DIN 28126:1989-04 | DN 125 BOW CLOSURES FOR PROCESS EQUIPMENT |
| DIN 5512-3:2004-05 | MATERIALS FOR RAIL VEHICLES - STEELS - PART 3: STAINLESS STEEL FLAT PRODUCTS - SELECTED STANDARD |
| DIN 26019:1992-04 | TANK WAGONS - HEATABLE OUTLET GATE - MOUNTING AND CONNECTING DIMENSIONS, REQUIREMENTS |
| DIN 65522:1984-07 | AEROSPACE - SCREWS, HEXAGON, WITH MJ-THREAD, THREADED APPROXIMATELY TO HEAD, CORROSION-RESISTING STEEL, NOMINAL TENSILE STRENGTH 700 MPA, FOR TEMPERATURES UP TO 425 DEGREES C |
| DIN 1052-2 : 1988 AMD 1 1996 | STRUCTURAL USE OF TIMBER - MECHANICALY FASTENED JOINTS |
| DIN 43720:1990-08 | ELECTRICAL TEMPERATURE SENSORS - THERMOCOUPLE METAL SHEATHS |
| BWB TL 7320-0064 : 2ED 1999 | FIELD KITCHEN WORK TABLE WITH MOUNTING BRACKET FOR FOOD CONTAINER(S) |
| DIN 13097-3:1979-11 | HYPODERMIC NEEDLES - MATERIALS, FINISH, TESTING |
| DIN 25452:1992-04 | MECHANICAL DESIGN OF FUEL ELEMENT STORAGE POOL IN NUCLEAR POWER PLANTS WITH LIGHT-WATER REACTORS |
| DIN VDE 0151 : 1986 | MATERIAL AND MINIMUM DIMENSIONS OF EARTH ELECTRODES WITH RESPECT TO CORROSION |
| DIN 2828:1994-02 | CAM LOCKING COUPLINGS FOR HOSE ASSEMBLIES - NOMINAL PRESSURE 10 |
| DIN 3352-10 E : 1979 | GATE VALVES OF STAINLESS STEEL |
| DIN 28450-2:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 2: MALE COUPLING |
| DIN 17456:1999-02 | SEAMLESS CIRCULAR STAINLESS STEEL TUBES WITH GENERAL QUALITY REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 28125 Beiblatt 1:1989-04 | Hinged covers; example for construction of a lifting aid |
| DIN 65306:1994-10 (Draft) | AEROSPACE; INSERTS FOR COMPOSITE MATERIALS, WITH CLEARANCE HOLE, CORROSION RESISTING STEEL |
| DIN 65191:2002-11 | Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel |
| UNE-EN 15001-1:2010 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| UNI EN 15001-1 : 2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| DIN VDE 0472-817 : 1992 | TESTING ON CABLES, WIRES AND FLEXIBLE CORDS - RESISTANCE TO WELD SPATTER |
| DIN 44921-1:1985-01 | Electric cartridge-type heating elements, metal-sheathed; dimensions |
| DIN 58946-2:1982-10 | STERILIZATION - STEAM STERILIZERS - BIG STERILIZERS - REQUIREMENTS |
| 11/30244204 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| DIN 125-1:1990-03 | PRODUCT GRADE A WASHERS WITH A HARDNESS UP TO 250 HV, DESIGNED FOR USE WITH HEXAGON HEAD BOLTS AND NUTS |
| DIN 14530-1:1989-01 | FIRE FIGHTING VEHICLES - TYPES, REQUIREMENTS ON FIRE FIGHTING EQUIPMENT |
| DIN 2609:1991-02 | STEEL BUTT-WELDING PIPE FITTINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN 14342:1986-11 | ALUMINIUM ALLOY B-C-ADAPTER FOR NOMINAL PRESSURE 16 |
| DIN 3341:1989-07 | PLATE VALVES FOR DISPLACEMENT COMPRESSORS; SUCTION VALVES, DISCHARGE VALVES; MAIN DIMENSIONS, MATERIALS, INSTALLATION |
| DIN 3404:1988-01 | LUBRICATING NIPPLES - BUTTON HEAD |
| DIN 28450-3:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 3: FEMALE COUPLING |
| DIN 4133:1991-11 | STEEL STACKS |
| DIN 30663:1975-06 | FLEXIBLE CONNECTION IN GAS-INSTALLATIONS |
| DIN 43733:1986-03 | MEASUREMENT AND CONTROL - ELECTRICAL TEMPERATURE SENSORS - STRAIGHT THERMOCOUPLE THERMOMETERS WITHOUT INTERCHANGEABLE SENSOR UNITS |
| DIN 4702-1:1990-03 | BOILERS FOR CENTRAL HEATING, TERMS, REQUIREMENTS, TESTING, MARKING |
| DIN 1654-5:1989-10 | COLD HEADING AND COLD EXTRUDING STEELS - TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS |
| DIN 65021:1986-11 | AEROSPACE; SHEET, PLATE AND STRIP OF STEEL, NICKEL ALLOYS AND COBALT ALLOYS; TECHNICAL SPECIFICATION |
| DIN 1045 : 1988 AMD 1 1996 | STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION |
| DIN 14341:1986-11 | ALUMINIUM ALLOY C-D ADAPTER FOR NOMINAL PRESSURE 16 |
| DIN 28053:1997-04 | CHEMICAL APPARATUS - ORGANIC COATINGS AND LININGS ON METAL COMPONENTS - REQUIREMENTS FOR METAL SURFACES |
| DIN VDE 0472-807 : 1985 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; CORROSION |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN 16195:1991-09 | INDUSTRIAL LIQUID-IN-GLASS THERMOMETERS WITH ROUND OR V-SHAPED CASE - REQUIREMENTS AND TESTING |
| DIN 6624-1:1989-09 | Horizontal single-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids |
| DIN 3387-2:1991-12 | TUBE CONNECTIONS FOR METALLIC TUBES HAVING FLANGED ENDS FOR GAS PIPES |
| DIN 28450-4:1996-03 | COUPLINGS FOR TANK TRUCKS, NOMINAL PRESSURE 10, NOMINAL SIZE 50, 80 AND 100 - PART 4: FEMALE DUST COUPLING |
| DIN 42562-2:1987-04 | TRANSFORMERS - DEHYDRATING BREATHER - CAPACITY 1.2 TO 4.8 KG - COMPONENTS |
| DIN 54141-2:1982-10 | NON-DESTRUCTIVE TESTING; EDDY CURRENT TEST OF TUBES; REFERENCE METHOD FOR DETERMINATION AND CALIBRATION OF PROPERTIES OF AN EDDY CURRENT TEST SYSTEM WITH FEED-THROUGH COILS FOR TUBE TESTING |
| DIN 7954:1983-03 | HARDWARE; HINGES ROLLED |
| DIN 59360:1981-10 | GROUND AND POLISHED BRIGHT ROUND STEEL; DIMENSIONS; PERMISSIBLE DEVIATIONS ACCORDING TO ISO TOLERANCE ZONE H7 |
| BS EN 15001-1:2009 | Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
| DIN 26020:1981-03 | TANK WAGONS - DOMES FOR MINERAL OIL TANK WAGONS - MOUNTING- AND CONNECTING DIMENSIONS - COMPONENT PARTS |
| DIN 4942:1999-01 | THREADED STEEL RISING PIPES FOR RAISING OF WATER - NOMINAL DIAMETER DN 50 TO DN 200 |
| DIN 17443:1986-04 | ROLLED AND WROUGHT STAINLESS STEEL PRODUCTS FOR SURGICAL IMPLANTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 3547-1:1990-06 | PN 4 TO PN 16 GAS AND WATER STOPVALVES; REQUIREMENTS AND ACCEPTANCE TESTING |
| DIN 65502:1984-07 | AEROSPACE - PAN HEAD BOLTS WITH RIPPED TORQ-SET (ACR) RECESS AND MJ-THREAD, SHORT THREAD, CORROSION-RESISTING STEEL, NOMINAL TENSILE STRENGTH 700 MPA, FOR TEMPERATURES UP TO 425 DEGREES C |
| DIN 28083-1:1987-01 | BRACKET SUPPORTS - DIMENSIONS AND MAXIMUM LOADS |
| DIN 95363:1994-07 | ELASTOMER MOUNTS; STUD MOUNTS; TYPES A TO F |
| DIN 17280:1985-07 | STEELS WITH LOW TEMPERATURE TOUGHNESS - TECHNICAL DELIVERY CONDITIONS FOR PLATE, SHEET, STRIP, WIDE FLATS, SECTIONS, BARS AND FORGINGS |
| DIN 17457:1985-07 | WELDED CIRCULAR AUSTENITIC STAINLESS STEEL TUBES SUBJECT TO SPECIAL REQUIREMENTS - TECHNICAL DELIVERY CONDITIONS |
| DIN 8948:1998-11 | DESICCANTS FOR REFRIGERANT DRYING - TESTING |
| DIN 28129:1990-03 | Clamp nuts; for covers |
| I.S. EN 15001-1:2009 | GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10079:2007 | Definition of steel products |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN EN 10263-5:2014-04 (Draft) | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS |
| DIN EN 10028-7:2016-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| DIN EN 10222-5:2013-01 (Draft) | STEEL FORGINGS FOR PRESSURE PURPOSES - PART 5: MARTENSITIC, AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEELS |
| EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
| DIN EN 10270-3:2012-01 | STEEL WIRE FOR MECHANICAL SPRINGS - PART 3: STAINLESS SPRING STEEL WIRE |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
| EN 10222-5:2017 | Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
| DIN 1654-5:1989-10 | COLD HEADING AND COLD EXTRUDING STEELS - TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS |
| EN 10250-4:1999 | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| DIN EN 10002-1:2001-12 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| PREN 10263-5 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| DIN EN 10052:1994-01 | VOCABULARY OF HEAT TREATMENT TERMS FOR FERROUS PRODUCTS |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.