DEFSTAN 80-41/3(2000) : 2000
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PAINT FINISHING, DEFENCE EQUIPMENT MATT TYPE: BRUSHING SPRAYING
04-19-2012
01-12-2013
Section One: General
1. Scope
2. WARNING
3. Related Documents
4. Description
5. Information to be Supplied by the Purchaser
6. Keeping Quality
7. Quality Assurance
8. Containers and Marking of Containers
Section Two: Material
9. Composition
10. Testing
Table A Test Requirements
Annex A Preparation of Painted Test Panels
Annex B Determination of Fitness for Recoat
Annex C Determination of Resistance to Development of Sheen
Annex D Determination of Resistance to Mineral Oil
Annex E Determination of Resistance to Liquid Fuel
Annex F Determination of Resistance to Artificial Weathering
Gives requirements for an air drying, near matt finishing paint which is suitable for both interior and exterior use. It can be used with an appropriate priming paint and undercoat on prepared and/or pre-treated ferrous and non ferrous substrates. Where that coating is not needed to be VOC compliant and/or Chemical Agent Resistant as defined in STANAG 4360, it is suitable for use on MOD vehicles and equipment.
| DevelopmentNote |
Supersedes DEFSTAN 80-41/2(1991), DEFSTAN 80-153/1(1991), DEFSTAN 80-135/2(1994) & DEFSTAN 80-41/1(1982) (10/2001) This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (10/2003) Supersedes TS 10150A. (11/2005)
|
| DocumentType |
Standard
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Withdrawn
|
| Supersedes |
| DEFSTAN 03-32(PT3)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 03-32(PT1)/4(2005) : 2005 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEERING EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 03-32(PT1)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
| DEFSTAN 68-118/3(2002) : 2002 | DE-ICING/ANTI-ICING FLUID FOR RUNWAYS |
| DEFSTAN 80-128/2(1998) : 1998 | PAINT, FINISHING, TEMPORARY CAMOUFLAGE, ALKALI REMOVABLE |
| DEFSTAN 03-32(PT5)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
| DEFSTAN 03-4/4(1998) : 1998 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
| DEFSTAN 03-32(PT4)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
| DEFSTAN 03-32(PT2)/3(2002) : 2002 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 2: SYSTEMS FOR FERROUS ARMOUR |
| DEFSTAN 68-233/1(1994) : 1994 | BASE PAPER, ADHESIVE COATED POLYETHYLENE LAMINATE FOR DETECTOR PAPER, NO 2, MK 2 |
| DEFSTAN 68-233/2(2009) : 2009 | BASE PAPER, ADHESIVE COATED POLYETHYLENE LAMINATE FOR DETECTOR PAPER, NO.2 MK 2 |
| BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
| BS EN ISO 1513:1995 | Paints and varnishes. Examination and preparation of samples for testing |
| BS EN ISO 1517:1995 | Paints and varnishes. Surface-drying test. Ballotini method |
| DEFSTAN 80-126/1(1989) : 1989 | PAINT, PRIMING, ZINC PHOSPHATE, AIR-DRYING - TYPES: BRUSHING, SPRAYING, DIPPING |
| BS EN 23270:1991 | Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
| DEFSTAN 00-23/2(1998) : 1998 | |
| STANAG 4360 : 2012 | SPECIFICATION FOR PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| DEFSTAN 83-39/3(1985) : 1985 | CLOTHS, 3 X 1 TWILL, COTTON |
| DEFSTAN 80-208/1(1997) : INTERIM | PAINT, FINISHING, POLYURETHANE, MULTI-PACK, MATT, IRR, NON AIRCRAFT USE, LOW VOC |
| BS EN ISO 2812-1:2007 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
| BS EN 29117:1992 | Methods of test for paints. Tests associated with paint film formation Paints and varnishes. Determination of through-dry state and through-dry time. Method of test |
| DEFSTAN 91-42/2(1996) : 1996 | LUBRICATING OIL, PETROLEUM: COMPRESSOR, LIGHT JOINT SERVICE DESIGNATION: OM-58 LUBRICATING OIL, PETROLEUM: COMPRESSOR, MEDIUM JOINT SERVICE DESIGNATION: OM-160 |
| BS EN ISO 1519:2011 | Paints and varnishes. Bend test (cylindrical mandrel) |
| DEFSTAN 80-114/1(1985) : 1985 | PAINT, PRIMING, DEFENCE EQUIPMENT AIR DRYING - TYPES: BRUSHING, SPRAYING DIPPING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.