DEFSTAN 80-208/3(2005) : 2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PAINT FINISHING, POLYURETHANE MULTI-PACK, MATT, IRR, CHEMICAL AGENT RESISTANT, NON AIRCRAFT USE, LOW VOC
Hardcopy , PDF
01-12-2021
English
01-01-2005
0 Introduction
1 Scope
2 Warning
3 Normative References
4 Description
5 Information to be Supplied by the Purchaser
6 Keeping Qualities
7 Quality Assurance
8 Product Conformity Certification (PCC)
9 Containers and Marking of Containers
10 Composition
11 Testing
11.1 Test conditions
11.2 Condition
12 Test Requirements
Annex A - Preparation of Test Panels
Annex B - Determination of Pot Life
Annex C - Determination of Resistance to OM-58
Annex D - Determination of Resistance to Liquid Fuel
Annex E - Determination of Resistance to Water
Specifies requirements for a multi-pack, cold-curing, polyurethane, chemical agent resistant, matt, infra-red reflecting (IRR), finishing paint (non aircraft), with a low Volatile Organic Compounds (VOC) content and suitable, when used with the appropriate primer, for the protection of military vehicles and equipment.
DevelopmentNote |
Supersedes DEFSTAN 80-208/2(2001) (12/2005)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Superseded
|
SupersededBy |
DEFSTAN 03-032(PT1)/5(2017) : 2017 | PRETREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 80-213/3(2017) : 2017 | PAINT, FINISHING, POLYURETHANE, MULTI-PACK, ANTI-SLIP, FOR LAND VEHICLES, LOW VOC |
DEFSTAN 03-4/5(2006) : 2006 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
DEFSTAN 81-41(PT6)/7(2010) : 2010 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
DEFSTAN 80-65/3(2009) : 2009 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
DEFSTAN 80-215/3(2017) : 2017 | PAINT, FINISHING, TEMPORARY COLOUR, ALKALI REMOVABLE, NON-AEROSPACE USE |
DEFSTAN 80-220/2(2009) : 2009 | PAINT, FINISHING, TEMPORARY CAMOUFLAGE, PEELABLE - NON AEROSPACE USE |
DEFSTAN 79-16/2(2006) : 2006 | DETERGENT SOLUTION, FOR THE CLEANING OF VEHICLES AND POWER PACKS IN PRESSURE WASHING MACHINES AND AUTOMATIC EQUIPMENT |
DEFSTAN 80-218/3(2017) : 2017 | TEMPORARY COLOUR COATING (TCC) REMOVER, NON-AIRCRAFT USE |
DEFSTAN 00-80/1(2012) : 2012 | SOLAR HEAT REFLECTANCE REQUIREMENTS OF PAINTS FOR MILITARY EQUIPMENT |
DEFSTAN 81-41(PT6)/8(2013) : 2013 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
DEFSTAN 80-218/2(2006) : 2006 | TEMPORARY COLOUR COATING (TCC) REMOVER, NON-AIRCRAFT USE |
DEFSTAN 03-4/6(2011) : 2011 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
DEFSTAN 80-065/4(2017) : 2017 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
DEFSTAN 80-215/2(2006) : 2006 | PAINT, FINISHING, TEMPORARY COLOUR, ALKALI REMOVABLE, NON-AEROSPACE USE |
DEFSTAN 80-206/3(2009) : 2009 | PAINT, PRIMING, ZINC PHOSPHATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
DEFSTAN 80-207/3(2009) : 2009 | PAINT, PRIMING, ZINC CHROMATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
DEFSTAN 03-032(PT4)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 4: SYSTEMS FOR FERROUS METAL, EXCLUDING ARMOUR |
DEFSTAN 03-032(PT5)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 5: SYSTEMS FOR NON-FERROUS METALS EXCLUDING ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 03-032(PT3)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 3: SYSTEMS FOR ALUMINIUM ALLOY FOR ARMOUR AND STRUCTURAL APPLICATIONS |
DEFSTAN 03-032(PT2)/5(2017) : 2017 | PRE-TREATMENT AND PAINTING OF VEHICLES, ENGINEER EQUIPMENT AND COMPONENTS - PART 2: SYSTEMS FOR FERROUS ARMOUR |
DEFSTAN 80-213/2(2009) : 2009 | PAINT, FINISHING, POLYURETHANE, MULTI-PACK, ANTI-SLIP, FOR LAND VEHICLES, LOW VOC |
SAE AMS03-4A : 2015(S2017) | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
DEFSTAN 81-41(PT6)/9(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 6: PACKAGE MARKING |
BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
DEFSTAN 80-207/2(2003) : 2003 | PAINT, PRIMING, ZINC CHROMATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
BS EN ISO 1518:2001 | Paints and varnishes. Scratch test |
BS EN ISO 1513:1995 | Paints and varnishes. Examination and preparation of samples for testing |
DEFSTAN 80-216/1(2002) : 2002 | PAINT, FILLER, SPRAYING, EPOXY, MULTI-PACK |
BS EN ISO 3696:1995 | Water for analytical laboratory use. Specification and test methods |
BS EN 23270:1991 | Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
DEFSTAN 00-23/3(2001) : 2001 | |
STANAG 4360 : 2012 | SPECIFICATION FOR PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
BS EN ISO 2431:2011 | Paints and varnishes. Determination of flow time by use of flow cups |
BS EN ISO 2812-1:2007 | Paints and varnishes. Determination of resistance to liquids Immersion in liquids other than water |
BS EN 45014:1998 | General criteria for supplier\'s declaration of conformity |
BS EN 29117:1992 | Methods of test for paints. Tests associated with paint film formation Paints and varnishes. Determination of through-dry state and through-dry time. Method of test |
DEFSTAN 80-206/2(2003) : 2003 | PAINT, PRIMING, ZINC PHOSPHATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
BS EN ISO 2409:2013 | Paints and varnishes. Cross-cut test |
BS 245:1976 | Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes |
DEFSTAN 00-72/2(2005) : 2005 | CHEMICAL AGENT RESISTANCE REQUIREMENTS FOR COATINGS APPLIED TO MILITARY EQUIPMENT |
DEFSTAN 91-42/2(1996) : 1996 | LUBRICATING OIL, PETROLEUM: COMPRESSOR, LIGHT JOINT SERVICE DESIGNATION: OM-58 LUBRICATING OIL, PETROLEUM: COMPRESSOR, MEDIUM JOINT SERVICE DESIGNATION: OM-160 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.