DEFSTAN 07-247(PT1)/3(2009) : 2009
Current
The latest, up-to-date edition.
THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS
Hardcopy , PDF
English
09-04-2009
Foreword
1 Scope
2 Warning
3 Normative References
4 Requirements
5 Brief descriptions of fire characteristics tests that
may be applied to RN materials
6 Design Requirements/Guidance
7 Corporate Experience & Knowledge
Annex A - Specific Fire Acceptance Criteria Cited In
Material And/Or Product Standards
Gives guidance to the designer on the requirements for control and selection of materials, on the basis of their Fire Characteristics, and specifies the aims and procedures by which it is intended to ensure that only authorised materials are fitted in Surface Ships and Submarines.
DevelopmentNote |
Supersedes DEFSTAN 07-247(PT1)/2(2006). (01/2010) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (05/2016)
|
DocumentType |
Standard
|
Pages |
72
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Current
|
Supersedes |
DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
DEFSTAN 02-330/3(2013) : 2013 | REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES |
DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
DEFSTAN 02-332/2(2013) : 2013 | REQUIREMENTS FOR FEED, STEAM AND DRAIN SYSTEMS FOR NUCLEAR SUBMARINE PROPULSION AND GENERATING MACHINERY |
DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-130/2(2012) : 2012 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
DEFSTAN 02-878/1(2011) : 2011 | NON-FERROUS TUBES AND PIPES FOR USE IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
DEFSTAN 02-900(PT0)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
DEFSTAN 47-032/3(2017) : 2017 | RUBBER HOSE AND HOSE ASSEMBLIES FOR FLUID POWER SYSTEMS |
DEFSTAN 02-165/2(2010) : 2010 | REQUIREMENTS FOR SPRING INTERIOR MATTRESSES FOR USE IN SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-345/2(2013) : 2013 | REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 20 BAR |
DEFSTAN 07-281/2(2017) : 2017 | SPECIFICATION FOR THE TYPE X RESILIENT MOUNT AND THE LEAF SPRING ASSEMBLY OF THE TYPE Y RESILIENT MOUNT |
BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
BS EN 50266-2-5:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Small cables. Category D |
NES 715 : ISSUE 2 | DETERMINATION OF THE TEMPERATURE INDEX OF SMALL SPECIMENS OF MATERIAL |
ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
BS 2782-1:Method 140E:1982 | Methods of testing plastics. Thermal properties Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method) |
DEFSTAN 02-518/1(2000) : 2000 | REQUIREMENTS FOR LIMITED FIRE HAZARD (LFH) SHEATHING FOR ELECTRIC CABLES - CATEGORY 2 |
API 607 : 2016 | FIRE TEST FOR QUARTER-TURN VALVES AND VALVES EQUIPPED WITH NONMETALLIC SEATS |
DEFSTAN 02-807(PT1)/1(2000) : 2000 | REQUIREMENTS FOR THE PRODUCTION OF WELDING AND BURNING BLANKETS AND HANGAR FIRE CURTAINS - PART 1: SILICA CLOTH FOR WELDING AND BURNING BLANKETS |
BS EN 50266-2-3:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category B |
BS 2782-1:Method 140D:1997 | Methods of testing plastics. Thermal properties Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method) |
BS EN 532:1995 | Protective clothing. Protection against heat and flame. Test method for limited flame spread |
DEFSTAN 02-517(PT1)/2(2008) : 2008 | REQUIREMENTS FOR CABLE, ELECTRIC - PART 1: PRESSURE-TIGHT ETHYLENE PROPYLENE RUBBER (EPR) OR SILICONE RUBBER INSULATED, CHLOROSULPHONATED POLYETHYLENE (CSP) LIMITED FIRE HAZARD (LFH) SHEATHED |
DEFSTAN 02-165/1(2000) : 2000 | REQUIREMENTS FOR SPRING INTERIOR MATTRESSES FOR USE IN SURFACE SHIPS AND SUBMARINES CATEGORY 2 |
ISO 5657:1997 | Reaction to fire tests Ignitability of building products using a radiant heat source |
BS EN 50267-2-2:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures Determination of degree of acidity of gases for materials by measuring pH and conductivity - Determination of degree of acidity of gases for materials by measuring pH and conductivity |
BS EN 50117-2-4 : 2004 | COAXIAL CABLES - PART 2-4: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - INDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MZ |
BS EN 50265-1:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable Apparatus |
BS EN ISO 4589-3:2017 | Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test |
BS EN ISO 13943:2017 | Fire safety. Vocabulary |
DEFSTAN 02-713/1(2000) : 2000 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
BS EN 60332-1-2 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004) |
DEFSTAN 22-91/1(2000) : 2000 | SPECIFICATION FOR UPHOLSTERY FABRIC FOR USE ON HM SHIPS |
DEFSTAN 02-851/1(2000) : 2000 | REQUIREMENTS FOR CARPETS - WOVEN AND TUFTED CONSTRUCTION |
IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
BS EN 50266-2-1:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category A F/R |
BS EN ISO 15025:2016 | Protective clothing. Protection against flame. Method of test for limited flame spread |
BS EN 50117-2-5 : 2004 | COAXIAL CABLES - PART 2-5: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 3000 MZ |
BS EN 1102:1996 | Textiles and textile products. Burning behaviour. Curtains and drapes. Detailed procedure to determine the flame spread of vertically oriented specimens |
DEFSTAN 07-204(PT1)/1(2000) : 2000 | THE REQUIREMENT FOR FIRE PROTECTION AND DAMAGE CONTROL FOR SURFACE SHIPS - CATEGORY 2 - PART 1: POLICY FOR SURFACE SHIPS |
BS EN 50267-2-1:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas |
DEFSTAN 61-12(PT25)/4(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 25: CABLES, ELECTRICAL LIMITED FIRE HAZARD, UP TO CONDUCTOR SIZE 10 MM[2] CROSS SECTIONAL AREA |
DEFSTAN 80-78/2(1995) : 1995 | PAINT, FINISHING, FLAME RETARDANT, BRUSHING |
BS EN 50266-2-2:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category A |
DEFSTAN 02-805(PT1)/1(2000) : 2000 | REQUIREMENTS FOR MASTIC AND SEALING THERMAL INSULATION MATERIAL - PART 1: MASTIC AND SEALING PRODUCTS VAPOUR BARRIER COATING |
DEFSTAN 80-77/2(1995) : 1995 | PAINT, PRIMING, FLAME RETARDANT, BRUSHING |
DEFSTAN 02-803(PT1)/1(2000) : 2000 | REQUIREMENTS FOR PLASTIC FOAM THERMAL INSULATION MATERIAL - PART 1: PLASTIC FOAM PRODUCTS, RIGID PLASTIC FOAM INSULATION SLABS, CUT AND MOULDED SECTIONS |
BS EN ISO 1182:2010 | Reaction to fire tests for products. Non-combustibility test |
DEFSTAN 02-643/2(2002) : 2002 | REQUIREMENTS FOR CABLES ELECTRICAL, SUB-MINIATURE AND SMALL MULTICORE, LIMITED FIRE HAZARD FOR SPECIAL PURPOSES |
DEFSTAN 61-12(PT0)/2(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 0: GENERAL REQUIREMENTS AND TEST METHODS - GENERAL SPECIFICATION |
BS 5866-4:1991 | Blankets suitable for use in the public sector Specification for flammability performance |
BS EN 50267-1:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables Apparatus |
BS 476-6(1989) : 1989 | FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
STANAG 4602 : 2004 | FIRE ASSESSMENT OF MATERIALS |
BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
DEFSTAN 02-526/2(2008) : 2008 | REQUIREMENTS FOR CABLES ELECTRIC, ELASTOMERIC, LIMITED FIRE HAZARD SHEATHED FOR GENERAL SERVICES |
BS 476-13:1987 | Fire tests on building materials and structures Method of measuring the ignitability of products subjected to thermal irradiance |
DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
DEFSTAN 02-137/2(2007) : 2007 | REQUIREMENTS FOR FOAM COMPONENTS FOR CUSHIONS AND UPHOLSTERY |
ISO 834:1975 | Fire-resistance tests — Elements of building construction |
BS 3G 230:2000 | Specification for general requirements for aircraft electrical cables (second series) |
BS 5438:1989 | Methods of test for flammability of textile fabrics when subjected to a small igniting flame applied to the face or bottom edge of vertically oriented specimens |
BS 476-15:1993 | Fire tests on building materials and structures Method for measuring the rate of heat release of products |
DEFSTAN 02-345/1(2000) : 2000 AMD 1 2002 | REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 10 BAR |
BS EN ISO 6941:2003 | Textile fabrics. Burning behaviour. Measurement of flame spread properties of vertically oriented specimens |
DEFSTAN 07-204(PT3)/1(2000) : 2000 | THE REQUIREMENT FOR FIRE PROTECTION AND DAMAGE CONTROL FOR SURFACE SHIPS - CATEGORY 2 - PART 3: SURFACE SHIP AND SUBMARINE EQUIPMENT |
DEFSTAN 02-517(PT5)/2(2008) : 2008 | REQUIREMENTS FOR CABLE, ELECTRIC - PART 5: MISCELLANEOUS |
DEFSTAN 02-167/3(2007) : 2007 | REQUIREMENTS FOR RESIN FOR USE IN SHIPS, BOATS, CRAFT AND CRAFT STRUCTURES |
DEFSTAN 02-803(PT2)/1(2000) : 2000 | REQUIREMENTS FOR PLASTIC FOAM THERMAL INSULATION MATERIAL - PART 2: PLASTIC FOAM PRODUCTS, PHENOLIC FOAM FOR COLD AND COOL ROOMS |
BS EN 50265-2-1:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures 1 kW pre-mixed flame - 1 kW pre-mixed flame |
BS EN ISO 3582:2001 | Flexible cellular polymeric materials. Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
DEFSTAN 08-147(PT2)/1(2000) : 2000 | REQUIREMENTS FOR DAMAGE CONTROL AND FIRE PROTECTION FOR THE SAFETY OF SURFACE SHIPS AND SUBMARINES - CATEGORY 1 - PART 2: SUBMARINES |
DEFSTAN 61-12(PT31)/2(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 31: SHEATHS - LIMITED FIRE HAZARD |
BS EN ISO 4589-2:2017 | Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
BS EN 50117-2-2 : 2004 | COAXIAL CABLES - PART 2-2: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - OUTDOOR DROP CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
BS 4735:1974 | Laboratory method of test for assessment of the horizontal burning characteristics of specimens no larger than 150 mm x 50 mm x 13 mm (nominal) of cellular plastics and cellular rubber materials when subjected to a small flame |
BS 4422:2005 | Fire. Vocabulary |
BS EN 50266-1:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables Apparatus |
BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
NES 153 : ISSUE 4 | REQUIREMENTS FOR THE PRODUCTION OF DECORATIVE MARBLED RESIBLE LINOLEUM SHEET AND TILES |
DEFSTAN 02-641/2(2002) : 2002 | DETERMINATION OF THE VERTICAL FLAMMABILITY OF ELECTRIC CABLES |
DEFSTAN 07-269/1(2000) : 2000 | PLYWOOD FOR NAVAL REQUIREMENTS - CATEGORY 3 |
BS EN ISO 10497:2010 | Testing of valves. Fire type-testing requirements |
BS EN ISO 6940:2004 | Textile fabrics. Burning behaviour. Determination of ease of ignition of vertically oriented specimens |
AFAP-3 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - TOXICITY OF FIRE EFFLUENTS |
BS 2782-1 Method 141:1986 | Methods of testing plastics. Thermal properties Determination of flammability by oxygen index |
DEFSTAN 02-525/1(2000) : 2000 | REQUIREMENTS FOR ELECTRIC CABLES, THIN - WALL INSULATED, LIMITED FIRE HAZARD CATEGORY 2 |
BS EN 50117-2-3 : 2004 | COAXIAL CABLES - PART 2-3: SECTIONAL SPECIFICATION FOR CABLES USED IN CABLED DISTRIBUTION NETWORKS - DISTRIBUTION AND TRUNK CABLES FOR SYSTEMS OPERATING AT 5 MHZ - 1000 MHZ |
BS EN 50266-2-4:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures Category C |
BS 7175:1989 | Methods of test for the ignitability of bedcovers and pillows by smouldering and flaming ignition sources |
DEFSTAN 02-527/1(2000) : 2000 | REQUIREMENTS FOR CABLES, ELECTRIC, FIRE SURVIVAL, HIGH TEMPERATURE ZONES AND LIMITED FIRE HAZARD SHEATHED CATEGORY 2 |
DEFSTAN 02-711/2(2006) : 2006 | DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
DEFSTAN 02-802/1(2008) : 2008 | REQUIREMENTS FOR MINERAL WOOL PRODUCTS FOR ACOUSTIC AND THERMAL INSULATION |
BS 2782-1:Methods 143A and 143B:1989 | Methods of testing plastics. Thermal properties Determination of flammability temperature of materials |
DEFSTAN 02-517(PT3)/1(2000) : 2000 | REQUIREMENTS FOR CABLES, ELECTRIC - PART 3: CO-AXIAL CATEGORY 3 |
NES 750 : ISSUE 2 | FIRE TEST FOR DECK COVERINGS WITH UNDERDECK HEAT SOURCE |
DEFSTAN 80-134/4(2008) : 2008 | PAINT SYSTEM, ANTI-SLIP FOR SHIPS DECKING, MULTI-PACK - TYPE 1: MEDIUM TEXTURE (HANGAR DECKS, WEATHER DECKS) - TYPE 2: ROUGH TEXTURE (FLIGHT DECKS) |
DEFSTAN 61-12(PT18)/5(2006) : 2006 | WIRES, CORDS AND CABLES, ELECTRICAL - PART 18: EQUIPMENT WIRES LIMITED FIRE HAZARD |
NES 714 : ISSUE 2 | DETERMINATION OF THE OXYGEN INDEX OF SMALL SPECIMENS OF MATERIAL |
DEFSTAN 22-73/1(2000) : 2000 | SPECIFICATION FOR LOW FIRE HAZARD SOLID RUBBER DECK-COVERING |
BS 5946:1980 | Method of test for determination of the punking behaviour of phenol-formaldehyde foam |
DEFSTAN 02-804/1(2008) : 2008 | REQUIREMENTS FOR CORK PRODUCTS FOR THERMAL INSULATION |
BS 6755-2:1987 | Testing of valves Specification for fire type-testing requirements |
DEFSTAN 02-806/1(2000) : 2000 | REQUIREMENTS FOR CERAMIC THERMAL INSULATION MATERIAL: CERAMIC PRODUCTS, CERAMIC ROPE AND CERAMIC BLANKET |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.