DEFSTAN 05-43/1(1977) : 1977
Current
The latest, up-to-date edition.
STANDARD PROCEDURES FOR TAKING SAMPLES OF HYDRAULIC FLUIDS FOR EVALUATION OF PARTICULATE CONTAMINATION
Hardcopy , PDF
English
06-27-1977
SECTION A - GENERAL REQUIREMENTS
Scope
Applicability
Related documents
SECTION B - SAMPLING REQUIREMENTS
Sampling points
Sampling periodicity
Taking the fluid sample from the system
Sampling procedure and equipment
Prevention of extraneous contamination
Data record
SECTION C - FIELD MONITOR SAMPLING
Design requirements for sampling equipment
Basic sampling equipment and accessories
Cleaning and preparation of equipment
Sampling procedure (Pressurized system)
Sampling procedure (Unpressurized system) using a
sampling pump
Sampling procedure (Unpressurized containers) using a
sampling pump
Cleaning of sampling equipment
Drying the membrane filter
Removal of residual fluid
SECTION D - BOTTLE SAMPLING
Summary
Preparation
Taking a bottle sample from a system using the sampling
equipment
Taking a bottle sample from a system with a sampling device
fitted, or large packaged stock (fitted with a drain cock)
Taking a bottle sample from a system where sampling points
are not fitted
Taking a bottle sample from a small packaged stock (up to 5
litres capacity)
Taking a bottle sample from packaged stock (large and small),
or system tanks, using a sampling pump
Processing of bottle samples to provide a membrane filter for
microscopic analysis
ANNEX - CLEANING OF THE EQUIPMENT
Summary
Environment
Procedure
Sample bottles
Quality control for samples bottles
Field monitor halves
Quality control for field monitor halves
Describes sampling of hydraulic fluids to evaluate particulate contamination.
DocumentType |
Standard
|
Pages |
24
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Current
|
DEFSTAN 02-341(PT1)/1(2000) : 2000 | REQUIREMENTS FOR CLEANING OF ITEMS, COMPONENTS AND EQUIPMENT FOR FLUID SYSTEMS - PART 1: CLEANING CATEGORY 2 |
DEFSTAN 00-970(PT0)/6(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT7)SEC7/3(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
DEFSTAN 00-970(PT7)SEC7/1(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT1)SEC6/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT1)SEC6/6(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT1)SEC6/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 02-324(PT1)/1(2000) : 2000 | REQUIREMENTS FOR HYDRAULIC SYSTEMS - PART 1: GENERAL |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT1)SEC6/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT1)SEC6/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT1)SEC6/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
DEFSTAN 00-970(PT1)SEC6/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT1)SEC6/14(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT7)SEC2/SUPP6/5(2015) : INTERIM | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 6: EQUIPMENT (SUBPART F) |
DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT1)SEC6/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT1)SEC6/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT1)SEC6/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT7)SEC7/2(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 05-46/2(1982) : 1982 | DETERMINATION OF PARTICULATE MATTER IN HYDRAULIC FLUIDS USING AN AUTOMATIC PARTICLE SIZE ANALYSER EMPLOYING THE LIGHT INTERRUPTION PRINCIPLE |
DEFSTAN 05-42/2(1982) : 1982 | PARTICULATE CONTAMINATION CLASSES FOR FLUIDS IN HYDRAULIC SYSTEMS |
DEFSTAN 05-45/1(1978) : 1978 | SIZING AND COUNTING PARTICULATE CONTAMINATION IN HYDRAULIC SYSTEM FLUID USING A BACK PROJECTION MICROSCOPE |
DEFSTAN 00-970(PT1)SEC6/16(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
DEFSTAN 00-970(PT7)SEC2/SUPP6/6(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 6: EQUIPMENT (SUBPART F) |
DEFSTAN 91-48/2(1997) : 1997 | HYDRAULIC FLUID, PETROLEUM: SUPERCLEAN NATO CODE: H-515 JOINT SERVICE DESIGNATION: OM-15 HYDRAULIC FLUID, PETROLEUM: NORMAL NATO CODE: H-520 JOINT SERVICE DESIGNATION: OM-18 |
DEFSTAN 80-142/2(2002) : 2002 | CORROSION PREVENTIVE: HYDRAULIC SYSTEM NATO CODE: C-635 JOINT SERVICE DESIGNATION: PX-26 |
DEFSTAN 05-44/1(1977) : 1977 | COMPARISON SLIDE METHOD FOR ASSESSING THE PARTICULATE CONTAMINATION CLASS OF HYDRAULIC SYSTEM FLUID |
DEFSTAN 05-42/2(1982) : 1982 | PARTICULATE CONTAMINATION CLASSES FOR FLUIDS IN HYDRAULIC SYSTEMS |
DEFSTAN 05-46/2(1982) : 1982 | DETERMINATION OF PARTICULATE MATTER IN HYDRAULIC FLUIDS USING AN AUTOMATIC PARTICLE SIZE ANALYSER EMPLOYING THE LIGHT INTERRUPTION PRINCIPLE |
DEFSTAN 01-5/13(2002) : 2002 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
DEFSTAN 05-44/1(1977) : 1977 | COMPARISON SLIDE METHOD FOR ASSESSING THE PARTICULATE CONTAMINATION CLASS OF HYDRAULIC SYSTEM FLUID |
BS 245:1976 | Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes |
DEFSTAN 05-45/1(1978) : 1978 | SIZING AND COUNTING PARTICULATE CONTAMINATION IN HYDRAULIC SYSTEM FLUID USING A BACK PROJECTION MICROSCOPE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.