DEFSTAN 02-330/2(2007) : 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES
Hardcopy , PDF
05-03-2013
English
01-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Warning
3 Related Documents
4 Definitions and Abbreviations
4.1 Definitions
4.2 Abbreviations
5 Drawings
6 Materials
6.1 General
6.2 Shell
6.3 Tubes/Tube-plates/Headers
6.4 Tube Support Plates/Baffles/Instrument Pockets
6.5 Inspection and Test
6.6 Item Details
7 Environmental Conditions
7.1 Ambient Sea, Air and Machinery Space Conditions
7.2 Motion
7.3 Shock
8 Design Requirements
8.1 General
8.2 Metrication
8.3 Pressures
8.4 Operational
8.5 Performance
8.6 Design
8.7 Availability, Reliability and Maintainability (ARM)
8.8 Insulation
8.9 Noise and Vibration
8.10 Interchangeability
8.11 Shell
8.12 Support Plates/Baffles
8.13 Tubes, Tube Fixing and Tube-plates
8.14 Headers
8.15 Dump Tube
8.16 Internal Air Extraction Arrangements
8.17 Heat Transfer Coefficient and Fouling Resistance
9 Instrumentation
9.1 Fittings
9.2 Pressure Indicators
9.3 Sensors
10 Information Required From Manufacturers
10.1 General
11 Cleaning and Preservation
11.1 Cleaning and Painting
11.2 Preservation
11.3 Preconditioning
12 Installation Requirements
12.1 Location
12.2 Clearance for Dismantling
12.3 Lifting
12.4 Connection
12.5 Power Supplies
12.6 Flushing
13 Test Requirements
13.1 Pressure Tests
13.2 Type Tests
Annex A Normative References
Specifies the requirements for the design, materials, installation and testing of main propulsion plant condensers in HM Nuclear Powered Submarines.
| DevelopmentNote |
Supersedes DEFSTAN 02-330/1(2000). (06/2007)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-362/1(2000) : 2000 | TYPE AND PRODUCTION TESTING OF MECHANICAL EQUIPMENT |
| DEFSTAN 02-747(PT2)/2(2004) : 2004 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 2: NICKEL ALUMINIUM BRONZE NAVAL ALLOY INGOTS AND SAND CASTINGS WITH WELDING PERMITTED TO THE WETTED SURFACE |
| DEFSTAN 02-729(PT1)/2(2006) : 2006 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHOD - PART 1: RADIOGRAPHIC |
| DEFSTAN 02-605(PT4)/1(2000) : 2000 | GUIDE TO SELECTION OF SENSORS FOR THE MEASUREMENT OF SYSTEM PARAMETERS - PART 4: SELECTION OF FLOW SENSORS CATEGORY 3 |
| DEFSTAN 08-123/1(2000) : 2000 | REQUIREMENTS FOR THE DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS - CATEGORY 2 |
| DEFSTAN 07-261(PT3)/1(2000) : 2000 | FASTENERS - CATEGORY 2 - PART 3: NON-FERROUS FASTENERS |
| DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
| DEFSTAN 02-747(PT1)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 1: NICKEL ALUMINIUM BRONZE NAVAL ALLOY CENTRIFUGALLY CAST |
| DEFSTAN 02-732/2(2000) : 2000 | THERMOMETERS, LIQUID IN GLASS EXPANSION TYPE AND THERMOMETER POCKETS |
| DEFSTAN 61-5(PT4)/4(2006) : 2006 | LOW VOLTAGE ELECTRICAL POWER SUPPLY SYSTEMS - QUALITY OF ELECTRICAL POWER SYSTEMS IN HM SHIPS |
| DEFSTAN 02-862(PT2)/2(2007) : 2007 | FASTENERS - PART 2: FERROUS |
| DEFSTAN 02-723/1(2000) : 2000 | REQUIREMENTS FOR MARKER PLATES |
| DEFSTAN 02-729(PT4)/2(2004) : 2004 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 4: LIQUID PENETRANT |
| DEFSTAN 02-710/1(2000) : 2000 | FLUID SYSTEMS GENERAL REQUIREMENTS (OBSOLESCENT) CATEGORY 2 |
| DEFSTAN 07-261(PT4)/1(2000) : 2000 | FASTENERS - CATEGORY 2 - PART 4: FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) |
| DEFSTAN 02-745/1(2006) : 2006 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS |
| DEFSTAN 02-863/1(2000) : 2000 | REQUIREMENTS FOR THE CLASSIFICATION, DIMENSIONS, TOLERANCES AND GENERAL STANDARDS OF ACCEPTANCE FOR COPPER AND NICKEL ALLOY CASTINGS |
| DEFSTAN 02-729(PT5)/2(2006) : 2006 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 5: ULTRASONIC |
| DEFSTAN 02-779(PT3)/1(2000) : 2000 | REQUIREMENTS FOR 90/10 COPPER NICKEL ALLOY MATERIAL - PART 3: TUBES CATEGORY 2 |
| DEFSTAN 02-833(PT2)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| DEFSTAN 02-605(PT1)/2(2003) : 2003 | GUIDE TO SELECTION OF SENSORS FOR MEASUREMENT OF SYSTEM PARAMETERS - PART 1: SELECTION OF LIQUID LEVEL, TEMPERATURE AND PRESSURE SENSORS |
| DEFSTAN 02-862(PT1)/2(2007) : 2007 | FASTENERS - PART 1: GENERAL |
| DEFSTAN 08-107/1(2000) : 2000 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| DEFSTAN 02-703/1(2000) : 2000 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| DEFSTAN 07-252/1(2000) : 2000 | REQUIREMENTS FOR THE PREPARATION AND PAINTING OF SUBMARINES - CATEGORY 2 |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| DEFSTAN 02-729(PT2)/2(2005) : 2005 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: MAGNETIC PARTICLE |
| DEFSTAN 02-310/1(2000) : 2000 | REQUIREMENTS FOR THE MANUFACTURE OF COMMERCIALLY PURE TITANIUM SEAMLESS TUBES TYPE A - HEAT EXCHANGER TYPE B - GENERAL PURPOSE |
| DEFSTAN 02-780(PT3)/1(2000) : 2000 | REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY MATERIAL - PART 3: TUBES CATEGORY 2 |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| BS EN 837-1:1998 | Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing |
| DEFSTAN 08-103(PT2)/1(2000) : 2000 | REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - CATEGORY 2 - PART 2: REQUIREMENTS FOR SUBMARINES |
| ASTM B 381 : 2013 : REDLINE | SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS |
| DEFSTAN 02-729(PT3)/2(2005) : 2005 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 3: EDDY CURRENT |
| DEFSTAN 02-360/2(2001) : 2001 | GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES |
| DEFSTAN 07-261(PT5)/1(2000) : 2000 | FASTENERS - CATEGORY 2 - PART 5: NON-FERROUS (SUBMARINE FIRST LEVEL QUALITY ASSURED) |
| DEFSTAN 07-253(PT1)/1(2000) : 2000 | REQUIREMENTS FOR 70/30 COPPER NICKEL ALLOY - CATEGORY 2 - PART 1: SHEET, STRIP, PLATE |
| DEFSTAN 66-2/4(2003) : 2003 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) |
| DEFSTAN 02-824(PT1)/2(2005) : 2005 | COPPER NICKEL CHROMIUM SAND CASTINGS AND INGOTS - PART 1: PRODUCTION REQUIREMENTS AND WELDING |
| DEFSTAN 02-747(PT4)/2(2005) : 2005 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING RESTRICTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY) |
| DEFSTAN 07-247(PT1)/2(2006) : 2006 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.