• Shopping Cart
    There are no items in your cart

DEFSTAN 00-25(PT20)/1(2004) : 2004

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Sorry this product is not available in your region.

1 HEALTH HAZARD ASSESSMENT HFI DOMAIN
   1.1 ENVIRONMENTAL STRESSORS
   1.2 WARNING
2 ENVIRONMENTAL TOLERANCE ISSUES [HHA1]
   2.1 INTRODUCTION
   2.2 TECHNICAL GUIDANCE
        2.2.1 Environmental Stressors
   2.3 DEFINITIONS
   2.4 REFERENCES
3 GRAVITY (AND ACCELERATION) [HHA2]
   3.1 TECHNICAL GUIDANCE
        3.1.1 Acceleration and Deceleration
        3.1.2 Human Factors in Weightlessness
   3.2 REFERENCES
4 ELECTRICAL/ELECTROMECHANICAL [HHA3]
   4.1 TECHNICAL GUIDANCE
   4.2 REFERENCES
5 RADIATION [HHA4]
   5.1 TECHNICAL GUIDANCE
        5.1.1 Ionizing Radiation
        5.1.2 Radiofrequency and other Non-ionizing
               Electromagnetic Radiations
   5.2 DEFINITIONS
   5.3 REFERENCES
6 THERMAL [HHA5]
   6.1 TECHNICAL GUIDANCE
        6.1.1 Units and Measurements
        6.1.2 Heat Stress
        6.1.3 Thermal comfort
        6.1.4 Cold Stress
        6.1.5 Hot Surfaces
   6.2 REFERENCES
7 ACOUSTIC [HHA6]
   7.1 TECHNICAL GUIDANCE
        7.1.1 Effects of Noise
        7.1.2 Noise Limits
        7.1.3 Legislation
        7.1.4 Use of Hearing Protection
   7.2 CHECKLIST
   7.3 DEFINITIONS
   7.4 REFERENCES
8 VIBRATION [HHA7]
   8.1 TECHNICAL GUIDANCE
        8.1.1 Vibration and Shock
   8.2 DEFINITIONS
   8.3 REFERENCES
9 TOXICITY (CHEMICALS / GASES) [HHA8]
   9.1 TECHNICAL GUIDANCE
        9.1.1 General
        9.1.2 Submarine Atmosphere
   9.2 DEFINITIONS
   9.3 REFERENCES
10 HAZARD LOGS [HHA9]
   10.1 TECHNICAL GUIDANCE
   10.2 REFERENCES
   10.3 SOURCES OF ADVICE
        10.3.1 Combined Environmental Factors
        10.3.2 Weightlessness
        10.3.3 Effects of Radiation
        10.3.4 Vibration and Shock
        10.3.5 Whole Body Motion Phenomenon
        10.3.6 Chemical and Biological Contaminants
        10.3.7 The Submarine Atmosphere
        10.3.8 Safety Standards

Human Factors Integration (HFI) describes health hazards as "hazards to health arising as a result of normal operation of the system".

DEFSTAN 00-25(PT15)/1(2004) : 2004 HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 15: PRINCIPLES AND PROCESS
DEFSTAN 02-309/3(2007) : 2007 REQUIREMENTS FOR GAS TURBINES
DEFSTAN 23-6/4(2005) : 2005 TECHNOLOGY GUIDANCE FOR MILITARY LOGISTICS VEHICLES

ISO/TR 3352:1974 Acoustics — Assessment of noise with respect to its effect on the intelligibility of speech
94/703406 DC : MAR 94 REVISION OF ISO 2631 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
BS EN ISO 13731:2002 Ergonomics of the thermal environment. Vocabulary and symbols
BS EN 355:2002 Personal protective equipment against falls from a height. Energy absorbers
BS EN 27243:1994 Hot environments. Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature)
PD 6504:1983 Medical information on human reaction to skin contact with hot surfaces
BS 8800:1996 Guide to occupational health and safety management systems
BS EN ISO 9886:2004 Ergonomics. Evaluation of thermal strain by physiological measurements
96/543189 DC : DRAFT NOV 1996 EN ISO 2801 CLOTHING FOR PROTECTION AGAINST HEAT AND FLAME - GENERAL RECOMMENDATIONS FOR SELECTION, CARE AND USE OF PROTECTIVE CLOTHING
BS 6262-4:1994 Glazing for buildings Safety related to human impact
BS EN ISO 7933:2004 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN 60651:1994 Specification for sound level meters
BS EN 1073-2:2002 Protective clothing against radioactive contamination Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
BS 4086:1966 Recommendations for maximum surface temperatures of heated domestic equipment
BS 6841:1987 Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
BS EN ISO 12894:2001 Ergonomics of the thermal environment. Medical supervision of individuals exposed to extreme hot or cold environments
BS EN ISO 10551:2001 Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales
BS EN 563:1994 Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces
BS EN ISO 7726:2001 Ergonomics of the thermal environment. Instruments for measuring physical quantities
BS EN ISO 5349-1:2001 Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration General requirements
ASTM F 1154 : 2011-07 PRACTICES FOR QUALITATIVELY EVALUATING THE COMFORT, FIT, FUNCTION, AND DURABILITY OF PROTECTIVE ENSEMBLES AND ENSEMBLE COMPONENTS
BS EN ISO 5349-2 : 2002 MECHANICAL VIBRATION - MEASUREMENT AND ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE
BS EN 354:2010 Personal fall protection equipment. Lanyards
BS EN 28996:1994 Ergonomics. Determination of metabolic heat production
ISO/TR 4870:1991 Acoustics The construction and calibration of speech intelligibility tests
BS EN 61508-1:2010 Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements
BS ISO 2631-4 : 2001 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 4: GUIDELINES FOR THE EVALUATION OF THE EFFECTS OF VIBRATION AND ROTATIONAL MOTION ON PASSENGERS AND CREW COMFORT IN FIXED-GUIDEWAY TRANSPORT SYSTEMS
BS EN ISO 7730:2005 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS 7915:1998 Ergonomics of the thermal environment. Guide to design and evaluation of working practices for cold indoor environments
ISO 2631-4:2001 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
BS 6611:1985 Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
BS EN 352-1:2002 Hearing protectors. Safety requirements and testing Ear-muffs
00/562571 DC : DRAFT JUN 2000 BS EN 13921-4 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 4: THERMAL CHARACTERISTICS
BS EN ISO 11399:2001 Ergonomics of the thermal environment. Principles and application of relevant International standards
DEFSTAN 00-56(PT2)/2(1996) : 1996 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE
PD 6519-2:1988 Guide to effects of current on human beings and livestock Special aspects relating to human beings
BS EN 361:2002 Personal protective equipment against falls from a height. Full body harnesses
00/565624 DC : DRAFT JAN 2001 BS EN 14058 PROTECTIVE CLOTHING GARMENTS FOR PROTECTION AGAINST COOL ENVIRONMENTS
ANSI Z136.1 : 2014 SAFE USE OF LASERS
PD 6585-2:1996 Hand-arm vibration. Guidelines for vibration hazards reduction Management measures at the workplace
BS 5330:1976 Method of test for estimating the risk of hearing handicap due to noise exposure
BS EN 60825-4 : 2006 SAFETY OF LASER PRODUCTS - PART 4: LASER GUARDS
BS EN 13202:2000 Ergonomics of the thermal environment. Temperatures of touchable hot surfaces. Guidance for establishing surface temperature limit values in product standards with the aid of EN 563
DEFSTAN 02-101(PT2)/1(2000) : 2000 REQUIREMENTS FOR DESIGN AND FITTING OUT OF WORKSHOPS, MAINTENANCE SPACES AND ENGINEERING STORES FOR HM SURFACE SHIPS - PART 2: SPECIFIC REQUIREMENTS CATEGORY 2
96/542490 DC : DRAFT OCT 1996 ISO 13688 PROTECTIVE CLOTHING - GENERAL REQUIREMENTS
BS 7971-1:2002 Protective clothing and equipment for use in violent situations and in training General requirements
BS EN 362:2004 Personal protective equipment against falls from a height. Connectors
DEFSTAN 02-101(PT1)/1(2000) : 2000 REQUIREMENTS FOR DESIGN AND FITTING OUT OF WORKSHOPS, MAINTENANCE SPACES AND ENGINEERING STORES FOR HM SURFACE SHIPS - PART 1:COMMON REQUIREMENTS CATEGORY 2
BS EN 352-2:2002 Hearing protectors. Safety requirements and testing Ear-plugs
BS EN ISO 10819:2013 Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
BS EN 363:2008 Personal fall protection equipment. Personal fall protection systems
ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
BS EN 340:2003 Protective clothing. General requirements
BS EN ISO 11690-1:1997 Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control strategies
DEFSTAN 00-56(PT1)/2(1996) : 1996 SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 1: REQUIREMENTS
BS EN 12515:1997 Hot environments. Analytical determination and interpretation of thermal stress using calculation of required sweat rate
BS ISO 9921-1:1996 Ergonomic assessment of speech communication Speech interference level and communication distances for persons with normal hearing capacity in direct communication (SIL method)
ISO 8194:1987 Radiation protection — Clothing for protection against radioactive contamination — Design, selection, testing and use
BS EN ISO 11690-2:1997 Acoustics. Recommended practice for the design of low-noise workplaces containing machinery Noise control measures
BS EN 943-2:2002 Protective clothing against liquid and gaseous chemicals, aerosols and solid particles Performance requirements for \'gas-tight\' (Type 1) chemical protective suits for emergency teams (ET)
MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
BS ISO 6954:2000 Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
BS EN 364:1993 Personal protective equipment against falls from a height. Test methods
DEFSTAN 00-35(PT3)/3(1999) : 1999 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 3: ENVIRONMENTAL TEST METHODS
DEFSTAN 00-35(PT6)/3(2000) : 2000 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 6: INDUCED CLIMATIC, CHEMICAL AND BIOLOGICAL ENVIRONMENTS
PD 6519-3:1999 Guide to effects of current on human beings and livestock Effects of currents passing through the body of livestock
MIL-STD-1474 Revision E:2015 NOISE LIMITS
BS EN 60825-2 : 2004 SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
BS EN 60825-1:2014 Safety of laser products Equipment classification and requirements
DEFSTAN 00-35(PT4)/3(1999) : 1999 AMD 1 2000 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 4: NATURAL ENVIRONMENTS
BS EN 12786:2013 Safety of machinery. Requirements for the drafting of the vibration clauses of safety standards
BS ISO 9920 : 1995 AMD 15269 ERGONOMICS OF THE THERMAL ENVIRONMENT - ESTIMATION OF THE THERMAL INSULATION AND EVAPORATIVE RESISTANCE OF A CLOTHING ENSEMBLE
STANAG 2899 : 2001 PROTECTION OF HEARING
BS EN 365:2004 Personal protective equipment against falls from a height. General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
BS AU 183:1983 Specification for passive seat belt systems
DEFSTAN 00-35(PT1)/3(1999) : 1999 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 1: CONTROL AND MANAGEMENT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.