DEFSTAN 00-101(PT2)/1(2005) : 2005

Foreword
Introduction
1 SCOPE
2 WARNING
3 RELATED DOCUMENTS
4 DEFINITIONS AND ABBREVIATIONS
5 AMENDMENT
6 SPONSORSHIP OF THE REQUIREMENT AND SECURITY
7 INTRODUCTION TO THE PROCESS FOR APPROVAL OF A CERTIFICATE
   OF SAFETY EXPLOSIVES
   7.1 Introduction to the Process
   7.2 The JSP 520 process (1st stage)
   7.3 The JSP 520/430 Interface
   7.4 The JSP 430 process (2nd stage)
   7.5 The Generic Naval Environment
   7.6 Magazine & Munition Protection Strategy
   7.7 Warships In Harbour
   7.8 Regulatory Documentation
SECTION 1 - PERFORMANCE REQUIREMENTS, ACOP AND GUIDANCE
8 PRINCIPLES FOR THE SAFE STOWAGE, PROTECTION AND HANDLING
   OF EXPLOSIVE MUNITIONS/STORES IN MOD SUBMARINES
   8.1 Description
   8.2 Performance Requirements - Basic Principles for
         the Safety and Protection of WSCs, Magazines and
         Munitions in MoD Submarines
   8.3 ACOP - Relationship of Explosive Safety to
         Vulnerability Reduction
   8.4 ACOP - Basic Principles of Capacity and Size
   8.5 ACOP - Basic Principles of for the Safety and
         Protection of WSCs, Magazines and Munitions
   8.6 Guidance - Threat Hazard Assessment and WSC,
         Magazine and Munition Protection Strategies
   8.7 Guidance - Basic Principles for Environmental
         Hazards
   8.8 Guidance - Explosives Compatibility Groups
   8.9 Guidance - Assessment of RATTAM Protection
   8.10 Guidance - BR 862 and other Safety and Environmental
         Management Systems (SEMS)
9 DESIGNATED DANGER AREAS (DDAs)
   9.1 Description
   9.2 Performance Requirements for DDAs
   9.3 ACOP for DDAs
   9.4 ACOP for Marking of Areas around Launchers
   9.5 Guidance - DDAs
10 ADJACENT COMPARTMENTS
   10.1 Description
   10.2 Performance Requirements for Adjacent Compartments
   10.3 ACOP for Reduction of Hazards from Adjacent
         Compartments
   10.4 ACOP for POL and Tanks Adjacent to a WSC/Magazine
   10.5 ACOP for Smoke/Heat Detectors in Adjacent
         Compartments
   10.6 Guidance - Adjacent Compartments
   10.7 Guidance - POL Products in Adjacent Compartments
   10.8 Guidance - Smoke/Heat Detectors in Adjacent
         Compartments
11 GENERAL WSC/MAGAZINE CONSTRUCTION REQUIREMENTS
   11.1 Description
   11.2 Performance Requirements for General WSC/Magazine
         Construction
   11.3 ACOP for Structural Integrity of WSCs/Magazines
   11.4 ACOP for General WSC Construction Requirements
   11.5 ACOP for Hydraulic Systems in WSCs/Magazines
   11.6 ACOP for Air Systems in WSCs/Magazines
   11.7 ACOP for Electrical Equipment and System
         Requirements
   11.8 ACOP for Non-Electrical Equipment Requirements
         in WSCs/Magazines
   11.9 ACOP for Painting and Preservation in WSCs/Magazines
   11.10 ACOP for Pumping/Flooding Arrangements in WSCs/Magazines
   11.11 ACOP for Access to WSCs/Magazines
   11.12 ACOP for Emergency Lighting in WSCs/Magazines
   11.13 ACOP for Contents of WSCs
   11.14 ACOP for Contents of Magazines and Small Magazines
   11.15 ACOP for WSC/Magazine Hazard Warning/Safety Signs &
         Notices
   11.16 Guidance - Safety Assessment Within the WSC/Magazine
   11.17 Guidance - Use of Flammable Hydraulic Fluids
   11.18 Guidance - Pumping/Flooding for WSCs/Magazines
   11.19 Guidance - Access to WSCs/Magazines
   11.20 Guidance - Emergency Lighting for WSCs/Magazines
   11.21 Guidance - Magazine Designed Capacity Lists
   11.22 Guidance - Safety Signs and Notices
   11.23 Guidance - Use of the WSC for Temporary Accommodation
12 MUNITION STOWAGES AND FITTINGS
   12.1 Description
   12.2 Performance Requirements for Munition Stowages and
         Fittings
   12.3 ACOP for General Munition Stowage Requirements
   12.4 ACOP for Clearance between Stowages and Adjacent
         Boundaries
   12.5 ACOP for Identification of Stowages and Stowage
         Capacity
   12.6 Guidance - Safe Stowage
   12.7 Guidance - Clearances between Stowages and Adjacent
         Boundaries
13 EXPLOSIVES STORE LOCKERS (ESL)/MAGAZINE LOCKERS
   13.1 Description
   13.2 Performance Requirements for ESL/Magazine Locker
         Design
   13.3 Performance Requirements for ESL/Magazine Locker
         Flooding Arrangements
   13.4 Performance Requirements for Siting and Installation
         of ESLs/Magazine Lockers
   13.5 ACOP for ESL/Magazine Locker Design
   13.6 ACOP for ESL/Magazine Locker Flooding Arrangements
   13.7 ACOP for Siting and Installation of ESLs/Magazine
         Lockers
   13.8 ACOP for Specific Locker Requirements
   13.9 ACOP for General Locker Notices and Notice Boards
   13.10 ACOP for ESL/Magazine Locker Contents
   13.11 Guidance - ESL/Magazine Lockers
   13.12 Guidance - Ready Use Magazines/Lockers
14 TORPEDO TUBES, LAUNCH TUBES AND UNDERWATER STORES EJECTOR
   SYSTEMS
   14.1 Description
   14.2 Performance Requirements for Tubes and Launchers
   14.3 Performance Requirements for Torpedo and Missile Tubes
   14.4 Performance Requirements for Underwater Stores
         Launch/Ejector Tubes
   14.5 ACOP for Torpedo and Missile Tubes
   14.6 ACOP for Underwater Stores Launch/Ejector Tubes
   14.7 ACOP for External Launcher/Ejector Tubes
   14.8 Guidance - Torpedo Tubes and Underwater Ejector Systems
   14.9 Guidance - External Launcher/Ejector Tubes
15 SPECIAL FORCES (SF)
   15.1 Description
   15.2 Performance Requirements for Stowage of SF Munitions
   15.3 Performance Requirements for Assault Routes
   15.4 ACOP for Stowage of SF/EMF Munitions
   15.5 ACOP for Assault Routes
   15.6 Guidance - Stowage of SF/EMF Munitions in Submarines
16 AIR CONDITIONING/VENTILATION SYSTEMS
   16.1 Description
   16.2 Performance Requirements for Air
         Conditioning/Ventilation Systems
   16.3 ACOP for Environmental Requirements
   16.4 ACOP for Ventilation System Design and Installation
   16.5 ACOP for Ventilation Trunking
   16.6 ACOP for Ventilation Isolation Arrangements
   16.7 ACOP for Ventilation Valve - Local and Remote
         Operating Positions
   16.8 ACOP for Ventilation System Notices
   16.9 Guidance - Air Conditioning/Ventilation Systems
17 FIRE PREVENTION AND FIRE FIGHTING ARRANGEMENTS
   17.1 Description
   17.2 Performance Requirements for General Fire Fighting
         Arrangements
   17.3 ACOP for Fire Prevention in Submarine Explosives
         Areas
   17.4 ACOP for Common Principles of Fire Detection and
         Control Systems
   17.5 ACOP for General Principles for WSC Water Fog Systems
   17.6 ACOP for WSC Firefighting Systems in S, T and V
         Class Submarines
   17.7 ACOP for WSC Firefighting Systems Water Supply
         in S, T and V Class Submarines
   17.8 ACOP for WSC/Magazine Water Fog System Signs/Notices
   17.9 ACOP for First Aid Fire Fighting Equipment in
         WSC/Magazines
   17.10 ACOP for Fire Fighting Arrangements in DDAs
   17.11 Guidance - Fire Prevention
   17.12 Guidance - Fire Fighting Arrangements - General
   17.13 Guidance - Design Requirements for Smoke and Heat
         Detection
   17.14 Guidance - Design Requirements for Spray Coverage
   17.15 Guidance - Requirements for Free Air Space
   17.16 Guidance - Integration of Fire Alarm Systems
   17.17 Guidance - Munition Fire Characteristics
   17.18 Guidance on First Aid Fire Fighting Equipment for
         WSC/Magazines and DDAs
18 MITIGATION METHODS TO PREVENT INITIATION OR REDUCE
   CONSEQUENCES FROM MUNITION INITIATION EVENTS
   18.1 Description
   18.2 Performance Requirements for Mitigation Methods
   18.3 ACOP for Mitigation Methods in Submarines
   18.4 ACOP for Mitigation for Fire
   18.5 ACOP for Mitigation for Blast Overpressure and Under
         Water Shock
   18.6 ACOP for Mitigation for Sympathetic Reaction
   18.7 ACOP for Mitigation for Rocket Efflux and
         Propulsive Reaction
   18.8 ACOP for Mitigation for Stowage of Shaped Charge
         Warheads including Demolition Munitions
   18.9 ACOP for Mitigation Tests or Assessments
   18.10 Guidance - Mitigation Methods in Submarines
   18.11 Guidance - Deriving Protection and Mitigation Methods
   18.12 Guidance - Corporate Knowledge of Mitigation Techniques
19 SECURITY AND ANTI-SABOTAGE ARRANGEMENTS
   19.1 Description
   19.2 Performance Requirements for Security and Anti
         Sabotage
   19.3 ACOP for Security of Doors, Hatches, Manholes
         and Escape Scuttles
   19.4 ACOP for Security Arrangements
   19.5 Guidance on Security and Anti-Sabotage Arrangements
20 AMMUNITION HANDLING - EMBARKING, STOWING AND SUPPLY
   20.1 Description
   20.2 Performance Requirements for Ammunition Handling
         Safety Policy
   20.3 Performance Requirements for Ammunition Handling -
         New Development
   20.4 Performance Requirements for Ammunition Routes
   20.5 Performance Requirements for Handling/Lifting Equipment
   20.6 ACOP for Ammunition Handling
   20.7 ACOP for Ammunition Routes
   20.8 ACOP for Handling/Lifting Equipment in WSCs/Magazines
         and DDAs
   20.9 ACOP for Ammunition Route Drawings
   20.10 Guidance - Ammunition Handling Safety Assessment
   20.11 Guidance - Mechanical Handling Equipment in a
         Submarine Environment
21 PLATFORM DYNAMIC SAFETY HAZARD ASSESSMENT
   21.1 Description
   21.2 Performance Requirements for Platform Dynamic Safety
   21.3 ACOP for Safe Integration of OME Safety Cases into
         Platform Safety Cases
   21.4 Guidance for Safe Integration of OME Safety Cases
         into Platform Safety Cases
   21.5 Guidance on Platform Dynamic Safety for Combat Systems
   21.6 Guidance on Platform Dynamic Safety for Missile Systems
   21.7 Guidance on Platform Dynamic Safety for Torpedo Systems
SECTION 2 - REGULATIONS
22 GENERAL APPLICATION OF LEGISLATION
23 MOD DISAPPLICATION
24 MOD REGULATION
ANNEX A - RELATED DOCUMENTS
ANNEX B - ABBREVIATIONS
ANNEX C - DEFINITIONS
ANNEX D - THREAT HAZARD ASSESSMENT
ANNEX E - FORM S285K

Applies to the design, construction and ship fitting of all MOD Ships built to MOD or Classification Society constructional standards and operated by the Royal Navy, Army (including Special Forces), Royal Air Force, RFA or MS.