DD ISO/TS 12417:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products
Hardcopy , PDF
10-31-2015
English
07-31-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Intended performance
6 Design attributes
7 Materials
8 Design evaluation
9 Post-market surveillance
10 Manufacturing
11 Sterilization
12 Packaging
Annex A (informative) - Definitions of potential
clinical events
Annex B (informative) - Information on device- and
drug-related aspects - Applicable documents
for local guidance
Bibliography
Describes requirements for vascular device-drug combination products (VDDCPs) based upon current technical and medical knowledge. VDDCPs are medical devices with various clinical indications for use in the human vascular blood system. A VDDCP incorporates, as an integral part, substance(s) which, if used separately, can be considered to be a medicinal product (drug product) but the action of the medicinal substance is ancillary to that of the device and supports the primary mode of action of the device.
| Committee |
CH/150/2
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
British Standards Institution
|
| RevisionOf | |
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO/TS 12417:2011 | Identical |
| ISO 11070:2014 | Sterile single-use intravascular introducers, dilators and guidewires |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 25539-2:2012 | Cardiovascular implants Endovascular devices Part 2: Vascular stents |
| ISO 15223-2:2010 | Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation |
| CFR 21(PTS200-299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 200-299 |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| ISO 16054:2000 | Implants for surgery Minimum data sets for surgical implants |
| ISO 13960:2010 | Cardiovascular implants and extracorporeal systems Plasmafilters |
| ISO 5840:2005 | Cardiovascular implants Cardiac valve prostheses |
| EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| ISO 10555-2:1996 | Sterile, single-use intravascular catheters Part 2: Angiographic catheters |
| ISO 7198:2016 | Cardiovascular implants and extracorporeal systems — Vascular prostheses — Tubular vascular grafts and vascular patches |
| ASTM F 2503 : 2013 : REDLINE | Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment |
| ISO 17475:2005 | Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
| ISO 25539-1:2017 | Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 14630:2012 | Non-active surgical implants — General requirements |
| ISO 5841-2:2014 | Implants for surgery — Cardiac pacemakers — Part 2: Reporting of clinical performance of populations of pulse generators or leads |
| ISO/TR 14283:2004 | Implants for surgery Fundamental principles |
| ASTM F 2052 : 2015 : REDLINE | Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment |
| ISO/TS 15539:2000 | Cardiovascular implants Endovascular prostheses |
| ISO 13781:2017 | Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing |
| ISO 7199:2016 | Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators) |
| ASTM F 2213 : 2017 : REDLINE | Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| ISO 10555-3:2013 | Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters |
| ISO 10555-1:2013 | Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements |
| ISO 15814:1999 | Implants for surgery Copolymers and blends based on polylactide In vitro degradation testing |
| ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
| ISO 16428:2005 | Implants for surgery — Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 10555-4:2013 | Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters |
| ISO 16429:2004 | Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.