CSA ISO 19904-1 : 2007 : R2017
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS
Hardcopy , PDF
09-26-2020
English, French
01-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Overall considerations
6 Basic design requirements
7 Actions and action effects
8 Global analysis
9 Structural considerations
10 Fatigue analysis and design
11 Monohulls
12 Semi-submersibles
13 Spars
14 Conversion and reuse
15 Hydrostatic stability and compartmentation
16 Mechanical systems
17 Stationkeeping systems
18 In-service inspection, monitoring and maintenance
Annex A (informative) - Additional information and
guidance
Bibliography
Provides requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: - production; - storage and/or offloading; - drilling and production; - production, storage and offloading; - drilling, production, storage and offloading.
| DocumentType |
Standard
|
| Pages |
204
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 19904-1:2006 | Identical |
| BS 7448-1:1991 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
| BV NR494 : R02 | RULES FOR THE CLASSIFICATION OF OFFSHORE LOADING & OFFLOADING BUOYS |
| ISO 17643:2015 | Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis |
| ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| BV NR384 : R01 | HULL STRUCTURE DESIGN - ALUMINIUM ALLOY SHIPS (CHAPTER 12) |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| ISO 9089:1989 | Marine structures Mobile offshore units Anchor winches |
| BV NR184 : R00 | RULES FOR THE CLASSIFICATION AND CERTIFICATION OF LIFTING APPLIANCES OF SHIPS AND OFFSHORE UNITS |
| NORSOK N-003:2017 | ACTIONS AND ACTIONS EFFECTS |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| BV NI171 : R00 | SLOSHING ON BOARD SHIP PARTIAL FILLING STUDY |
| ISO 10420:1994 | Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications |
| API RP 14C : 2017 | ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES |
| BS 8010-3:1993 | Code of practice for pipelines Pipelines subsea: design, construction and installation |
| API BULL 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| ISO 6361-1:2011 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ISO 2394:2015 | General principles on reliability for structures |
| ISO 17636:2003 | Non-destructive testing of welds Radiographic testing of fusion-welded joints |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| EN 12473:2014 | General principles of cathodic protection in seawater |
| ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| CFR 49(PTS186-199) : 0 | TRANSPORTATION |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| ISO 17640:2017 | Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
| BV NI299 : R00 | GUIDELINES ON DOCUMENTS TO BE SUBMITTED FOR STABILITY STUDY |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
| API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| BV NR423 : R00 | CORROSION PROTECTION OF STEEL OFFSHORE UNITS AND INSTALLATIONS |
| BV NR497 : R00 | HULL STRUCTURE OF PRODUCTION, STORAGE AND OFFLOADING SURFACE UNITS |
| API RP 16Q : 2017 | DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS |
| ISO 2103:1986 | Loads due to use and occupancy in residential and public buildings |
| BV NR446 : R00 | RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS - INTRODUCTION |
| API RP 17B : 2014 | RECOMMENDED PRACTICE FOR FLEXIBLE PIPE |
| ISO 17637:2016 | Non-destructive testing of welds Visual testing of fusion-welded joints |
| BS 7448-2:1997 | Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| BV NI409 : R00 | GUIDELINES FOR CORROSION PROTECTION OF SEAWATER BALLAST TANKS AND HOLD SPACES |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| API BULL 2U : 2004 | BULLETIN ON STABILITY DESIGN OF CYLINDRICAL SHELLS |
| BV NI393 : R01 | FATIGUE STRENGTH OF WELDED SHIP STRUCTURES |
| BV NR460 : R00 | SAFETY FEATURES OF OFFSHORE UNITS AND INSTALLATIONS |
| EN 13173:2001 | Cathodic protection for steel offshore floating structures |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| ISO 19901-5:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction |
| BV NR445 : 2016 | RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS (FULL PACKAGE) |
| ISO 19901-1:2015 | Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
| ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
| BV NI165 : R00 | ULTRASONIC TESTING OF HULL BUTT WELDS |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
| PREN 13852 : DRAFT 2000 | CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
| ISO 17638:2016 | Non-destructive testing of welds Magnetic particle testing |
| API 2D : 2014 | OPERATION AND MAINTENANCE OF OFFSHORE CRANES |
| ISO 76:2006 | Rolling bearings Static load ratings |
| API 17D : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| API 8A : 1997 | SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT |
| NORSOK N 004 : REV 3 AC 2014 | DESIGN OF STEEL STRUCTURES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.