CR 10260 : 1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS
Superseded date
08-01-2005
Superseded by
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
1 Scope
2 Normative references
3 Definitions
4 Allocation of additional symbols
5 Consultation
6 Additional symbols
6.1 Steel names
6.2 Steel numbers
6.3 Steels designated according to their application
and mechanical or physical properties
6.4 Steels designated according to their chemical
composition
Tables
1 Symbols indicating specified requirements
2 Symbols indicating type of coating
3 Symbols indicating treatment condition
Gives additional symbols for supplementing the principal symbols of steel names as specified in EN 10027-1, together with certain additional symbols for supplementing steel numbers as specified in EN 10027-2, thereby giving a complete abbreviated identification of a steel or steel product.
| Committee |
ECISS/TC7
|
| DevelopmentNote |
Also numbered as BS DD214(1993). (08/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNI 10440 : 2000 | Identical |
| NF CR 10260 : 98 FD | Identical |
| DIN V 17006-100:1999-04 | Identical |
| SN CR 10260 : 1998 | Identical |
| NEN NPR CR 10260 : 1998 | Identical |
| I.S. EN 10213-1:1996 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| 04/100723 DC : DRAFT JAN 2004 | EN 10213 - STEEL CASTINGS FOR PRESSURE PURPOSES |
| EN 10085:2001 | Nitriding steels - Technical delivery conditions |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| I.S. EN 10217-6:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| BS EN 10217-4:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| BS EN 10025-5:2004 | Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance |
| BS EN 10154:2002 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10250-1:1999 | Open steel die forgings for general engineering purposes General requirements |
| BS EN 10025-2:2004 | Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
| BS EN 10089:2002 | Hot rolled steels for quenched and tempered springs. Technical delivery conditions |
| BS EN 39:2001 | Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions |
| BS EN 10025-3:2004 | Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods) |
| EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| DIN EN 10025-5:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| EN 10271:1998 | Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions |
| EN 10025-1:2004 | Hot rolled products of structural steels - Part 1: General technical delivery conditions |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| DIN EN 10025-4:2005-02 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| EN 10213-1 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| 02/713774 DC : DRAFT DEC 2002 | EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 03/103470 DC : DRAFT FEB 2003 | BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 05/30132585 DC : DRAFT APR 2005 | EN 10083-1 - STEELS FOR QUENCHING AND TEMPERING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| 01/708775 DC : DRAFT MAY 2001 | PREN 10297-2 - SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN EN 10025-3:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| I.S. EN 10217-3:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| I.S. EN 10217-5:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10217-6:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| DIN EN 10297-1:2003-06 | SEAMLESS CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES |
| DIN EN 10297-2:2006-02 | Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| BS EN 10312:2002 | Welded stainless steel tubes for the conveyance of aqueous liquids inclu ding water for human consumption. Technical delivery conditions |
| BS EN 10162:2003 | Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances |
| I.S. EN 10296-2:2006 | WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL |
| DIN EN 10169-3:2003-09 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| DIN EN 10213-1:1996-01 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 1: GENERAL |
| DIN EN 10169-1:2004-04 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| DIN EN 10025-1:2005-02 | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version EN 10025-1:2004 |
| I.S. EN 10327:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10169-1:2004 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 10326:2004 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10025-2:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| 99/712245 DC : DRAFT AUG 1999 | PREN 10080-1 - STEEL FOR CONCRETE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - PART 1: GENERAL REQUIREMENTS |
| 99/701054 DC : DRAFT JAN 1999 | PREN 10089 - HOT-ROLLED STEELS FOR QUENCHED AND TEMPERED SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| 00/713959 DC : DRAFT SEP 2000 | PREN 10138-3 - PRESTRESSING STEELS - PART 3: STRAND |
| 05/30132603 DC : DRAFT APR 2005 | EN 10083-3 - STEELS FOR QUENCHING AND TEMPERING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR ALLOY STEELS |
| I.S. EN 10085:2001 | NITRIDING STEELS - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10025-4:2004 | Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| I.S. EN 10025-3:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| DIN EN 10217-5:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10217-3:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| I.S. ENV 10169-2:1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| BS EN 10217-6:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
| I.S. EN 10132-1:2000 | COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10089:2003-04 | Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002 |
| BS EN 10213-1:1996 | Technical delivery conditions for steel castings for pressure purposes General |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products Products for building interior applications |
| UNI EN 10250-1 : 2001 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - GENERAL REQUIREMENTS |
| I.S. EN 10250-1:2000 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10087:1999 | FREE-CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT-ROLLED BARS AND RODS |
| I.S. EN 39:2001 | LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 10154:2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| 98/705399 DC : DRAFT MAR 1998 | PREN 10025-1 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 1: GENERAL DELIVERY CONDITIONS |
| 02/704945 DC : DRAFT APR 2002 | PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| 03/108196 DC : 0 | EN 10253-4 - BUTT WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10025-1:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| 03/103468 DC : DRAFT FEB 2003 | BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS |
| 02/713544 DC : DRAFT NOV 2002 | EN 10268 - COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10217-3:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
| 00/713960 DC : 0 | PREN 10138-4 - PRESTRESSING STEELS - PART 4: BARS |
| 01/708774 DC : DRAFT MAY 2001 | PREN 10296-2 - WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL TUBES |
| DIN EN 10025-4:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| DD ENV 10169-2:1999 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| I.S. EN 10025-4:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| I.S. EN 10025-5:2004 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| I.S. EN 10217-1:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 10217-4:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| PREN 10268 : DRAFT 2002 | COLD ROLLED FLAT PRODUCTS WITH HIGHER YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10085:2001-07 | Nitriding steels - Technical delivery conditions; English version of DIN EN 10085 |
| BS EN 10025-1:2004 | Hot rolled products of structural steels General technical delivery conditions |
| BS EN 1503-1:2000 | Valves. Materials for bodies, bonnets and covers Steels specified in European Standards |
| BS EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions |
| BS EN 10271:1999 | Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions |
| BS EN 10296-2:2005 | Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| BS EN 10087 : 1999-01 | FREE CUTTING STEELS - TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, HOT ROLLED BARS AND RODS |
| BS EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions |
| BS EN 10147:2000 | Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions |
| BS EN 10142:2000 | Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions |
| BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| BS EN 10085 : 2001-05 | NITRIDING STEEL - TECHNICAL DELIVERY CONDITIONS |
| BS EN 10297-2:2005 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel |
| DIN EN 10224:2005-12 | NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS |
| ENV 10169-2 : 1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
| 98/705400 DC : DRAFT MAR 1998 | PREN 10025-2 - HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS |
| I.S. EN 10169-3:2003 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| 02/704946 DC : DRAFT APR 2002 | PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| 98/712958 DC : DRAFT AUG 1998 | PREN 10305-4 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 4: SEAMLESS COLD DRAWN TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 00/713958 DC : 0 | PREN 10138-2 - PRESTRESSING STEELS - PART 2: WIRE |
| DIN EN 10025-5:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| 02/713103 DC : DRAFT NOV 2002 | PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS) |
| I.S. EN 10217-4:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| EN 10025-5:2004 | Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
| I.S. EN 10217-2:2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| DIN EN 10025-1:2011-04 (Draft) | Hot rolled products of structural steels - Part 1: General technical delivery conditions; German version prEN 10025-1:2011 |
| BS EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes |
| DIN EN 10296-1:2004-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| BS EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions General |
| BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
| DIN EN 10312:2005-12 | Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005 |
| EN 10087:1998 | Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods |
| DIN EN 10326:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10327:2004-09 | CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10296-2:2006-02 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10089:2002 | Hot-rolled steels for quenched and tempered springs - Technical delivery conditions |
| EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| EN 10154 : 2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10154:2002-08 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 10162:2003-12 | Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003 |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10020:2000 | Definition and classification of grades of steel |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.