CFR 40(PTS260-265) : JUL 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
Superseded date
01-04-2024
Superseded by
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
| DocumentType |
Standard
|
| PublisherName |
Code of Federal Regulations
|
| Status |
Superseded
|
| SupersededBy |
| API 49 RUSSIAN : 2001 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| MIL-PRF-3135 Revision H:2008 | DECK COVERING UNDERLAY MATERIALS |
| NFPA 473 : 2018 | COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
| MIL-DTL-24631 Revision A:1997 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
| MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
| MIL-PRF-32359 Base Document:2012 | CLEANER, GENERAL, FOR GROUND VEHICLES AND GROUND SUPPORT EQUIPMENT, HAP-FREE |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| ASTM C 852/C852M : 2017 : REDLINE | Standard Guide for Design Criteria for Plutonium Gloveboxes |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
| MIL-PRF-32161 Base Document:2004 | INSULATION, HIGH TEMPERATURE FIRE PROTECTION, THERMAL AND ACOUSTIC |
| SSPC-QP 2 : 2009 | STANDARD FOR EVALUATING PAINTING CONTRACTORS (REMOVAL OF HAZARDOUS COATINGS FROM INDUSTRIAL/MARINE STEEL STRUCTURES) |
| IEEE 1578-2007 | IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management |
| ASTM D 6823 : 2008 : R2013 | Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
| ASTM D 6823 : 2008 | Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| IPC 7526 : 2007 | STENCIL AND MISPRINTED BOARD CLEANING HANDBOOK |
| IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| IPC CH 65 CHINESE : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| MIL-PRF-32170 Revision A:2006 | DECK TILES, WEAR-RESISTANT |
| NACE SP 04 87 : 2007 | CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTIVES AND VAPOR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 6911 : 2015 : REDLINE | Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis |
| ASTM E 2979 : 2018 | Standard Classification for Discarded Materials from Manufacturing Facilities and Associated Support Facilities |
| ASTM F 1011 : 2007 : R2013 | Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel |
| ASTM C 1615/C1615M : 2017 : REDLINE | Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NACE SP 01 08 : 2008 | CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
| UFC 3-420-01 : Change 10 | UNIFIED FACILITIES CRITERIA - PLUMBING SYSTEMS |
| ASTM D 5790 : 1995 : R2001 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
| MIL HDBK 1028/8 : A | DESIGN OF PEST MANAGEMENT FACILITIES |
| MIL-HDBK-775 Base Document:1996 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| ASTM E 2051 : 2001 | Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis (Withdrawn 2010) |
| MIL-DTL-32265 Base Document:2007 | Folded Fiberglass Mat Fabrication and Packaging |
| MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
| MIL-PRF-24951 Revision B:1995 | FUEL OIL RECLAIMED |
| MIL-PRF-24613 Revision A:2007 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
| AASHTO TP 102 : 2012 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| A-A-59777 Revision A:2009 | DRY FILTER UNIT |
| MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
| MIL-PRF-32516 Base Document:2015 | ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS |
| NFPA 471 SPANISH : 2002 | RECOMMENDED PRACTICE FOR RESPONDING TO HAZARDOUS MATERIALS INCIDENTS |
| NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
| ASTM D 6346 : 2017 : REDLINE | Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM E 1908 : 2016 : REDLINE | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| MIL-DTL-22050 Revision E:2004 | Gasket and Packing Material, Rubber, for use with Polar Fluids, Steam, and Air at Moderately High Temperatures |
| ASTM F 1011 : 2007 | Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel |
| ASTM E 2421 : 2015 : REDLINE | Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities |
| ASTM D 4447 : 2015 : REDLINE | Standard Guide for Disposal of Laboratory Chemicals and Samples |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| API 49 RUSSIAN : 2001 : R2007 | RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE |
| IEEE 1127-2013 REDLINE | IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility |
| ASTM E 2052 : 1999 | Standard Guide for Evaluation, Management, and Control of Lead Hazards in Facilities (Withdrawn 2008) |
| ASTM D 5790 : 1995 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 650 : 2013+ADD 3 : 2018 | WELDED TANKS FOR OIL STORAGE |
| API 650 CHINESE : 2013 | WELDED TANKS FOR OIL STORAGE |
| AASHTO TP 102 : 2012 : R2015 | METHOD OF TEST FOR EVALUATION OF ASPHALT RELEASE AGENTS (ARAS) |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| ASTM D 5790 : 1995 : R2012 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| AWWA B605 : 2013 | REACTIVATION OF GRANULAR ACTIVATED CARBON |
| UFC 3-810-01N : Change 1 | UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS ENVIRONMENTAL ENGINEERING FOR FACILITY CONSTRUCTION |
| UFC 3-280-04 : 2003 | UNIFIED FACILITIES CRITERIA - ARMY FILTRATION OF LIQUIDS |
| MIL-PRF-24647 Revision E:2013 | PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| NSF 140 : 2015 | SUSTAINABILITY ASSESSMENT FOR CARPET |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ASTM E 1266 : 2012 : REDLINE | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM D 5790 : 1995 : R2006 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
| PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.