CFR 29(PT1926) : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
Superseded date
12-04-2019
Superseded by
Publisher
Sorry this product is not available in your region.
| DocumentType |
Standard
|
| PublisherName |
Code of Federal Regulations
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE 902-1998 | IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
| MIL-DTL-24607 Revision B:2008 | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
| MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| ANSI A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| NASA SSTD 8070 0119 : 2009 | DIG PERMIT STANDARD (FORM SSC-618) |
| API 1117 : 2008 : INC : ERR 2 : 2009 : R2013 | RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES |
| ANSI/ASSE A10.22 : 2007 : R2012 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
| ANSI A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| ANSI/ASSE A10.22 : 2007 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
| ANSI A10.22 : 2007 : R2012 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| ACI SP 4 : 2014 | FORMWORK FOR CONCRETE |
| NFPA 1006 : 2017 | TECHNICAL RESCUE PERSONNEL PROFESSIONAL QUALIFICATIONS |
| ASCE/EWRI 12-13, 13-13, 14-13 : 2013 | STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
| NETA ECS : 2015 | ELECTRICAL COMMISSIONING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| UFC 3-520-05 : Change 1 | UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS |
| UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
| PIP STS02465 : 2012 | AUGERED CAST-IN-PLACE PILES INSTALLATION SPECIFICATION |
| SSPC-GUIDE 12 : 2016 | GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS |
| API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| EM 385-1-1 : 20031103 | SAFETY - SAFETY AND HEALTH REQUIREMENTS |
| ANSI Z49.1 : 2012 | SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
| API 1117:2008 | RECOMMENDED PRACTICE FOR MOVEMENT IN IN-SERVICE PIPELINES |
| MIL HDBK 1025/10 : 0 | SAFETY OF ELECTRICAL TRANSMISSION AND DISTRIBUTION SYSTEMS |
| ASTM E 2706 : 2018 | Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements |
| ANSI/ASSE A10.19 : 2008 | SAFETY REQUIREMENTS FOR PILE INSTALLATION AND EXTRACTION OPERATIONS |
| ANSI A10.5 : 2013 | SAFETY REQUIREMENTS FOR MATERIAL HOISTS |
| ASTM D 7886 : 2014 | Standard Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks |
| ASCE/CI 36 15 : 2015 | STANDARD DESIGN AND CONSTRUCTION GUIDELINES FOR MICROTUNNELING |
| ASTM C 1840/C1840M : 2017 | Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe |
| ASTM C 1821/C1821M : 2016 | Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures |
| ASTM E 1628 : 1994 : R2000 | Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration |
| UFC 3-410-04N : 2004 | UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION |
| PIP PLSC0011 : 2017 | TRENCHING AND EXCAVATION FOR PIPELINES |
| IEEE 1100 : 2005 | POWERING AND GROUNDING ELECTRONIC EQUIPMENT |
| ANSI A10.5 : 2013 | SAFETY REQUIREMENTS FOR MATERIAL HOISTS |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| SSPC-GUIDE 6 : 2015 | GUIDE FOR CONTAINING SURFACE PREPARATION DEBRIS GENERATED DURING PAINT REMOVAL OPERATIONS |
| ANSI/ASSE A10.27 : 1998 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| ANSI A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| ANSI A10.22 : 2007 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
| NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
| ANSI A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| ANSI/ASSE A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| ANSI/ASSE A10.47 : 2015 | WORK ZONE SAFETY FOR HIGHWAY CONSTRUCTION |
| NACE RP 02 97 : 2004 | MAINTENANCE PAINTING OF ELECTRICAL SUBSTATION APPARATUS INCLUDING FLOW COATING OF TRANSFORMER RADIATORS |
| ASTM E 1628 : 1994 : R2008 | Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration (Withdrawn 2014) |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
| NASA KSC STD Z 0004 : 2002 | STRUCTURAL DESIGN, STANDARD FOR |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA SSTD 8070 0081 : 2001 | FACILITY ELECTRICAL STANDARD |
| NASA SSTD 8070 0047 : 2016 | STANDARD FOR STAINLESS STEEL PIPING SYSTEMS AA, ACK1, ACK4, ACK6, B, BCK1, BCK3, BCK4, BCK6, BCK10, C, EE, G, H, JJ, K3, L1, L2, NCK1, NCK2, NCK3, NCK10, NCK11, P, R, T, AND Z |
| CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
| FED-STD-313 Revision D:1996 | MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES |
| API RP 1646 : 2017 | SAFE WORKING PRACTICES FOR CONTRACTORS WORKING AT RETAIL PETROLEUM/CONVENIENCE FACILITIES |
| A-A-59918 Revision B:2014 | SELF PROPELLED CONCRETE SAW (SPCS) |
| ANSI/ASSE A10.27 : 1998 : R2011 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
| IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
| MIL-B-13207 Revision D:1976 | BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR |
| API 2027 : 2002 : R2007 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| ANSI/ASSE A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| FAA 3900.65 : 2014 | FLIGHT STANDARDS SERVICE (AFS) FALL PROTECTION PROGRAM (FPP) |
| NACE SP 02 97 : 2012 | MAINTENANCE PAINTING OF ELECTRICAL SUBSTATION APPARATUS INCLUDING FLOW COATING OF TRANSFORMER RADIATORS |
| ANSI/ASSE A10.26 : 2011 | EMERGENCY PROCEDURES FOR CONSTRUCTION AND DEMOLITION SITES |
| ANSI/ASSE TR A1264.3 : 2007 | USING VARIABLE ANGLE TRIBOMETERS (VAT) FOR MEASUREMENT OF THE SLIP RESISTANCE OF WALKWAY SURFACES |
| ANSI/ASSE A10.22 : 2007 : R2012 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| ASTM E 2950 : 2014 | Standard Specification for Metal Canopy Systems |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| ANSI E1.39 : 2015 | ENTERTAINMENT TECHNOLOGY - SELECTION AND USE OF PERSONAL FALL ARREST SYSTEMS ON PORTABLE STRUCTURES USED IN THE ENTERTAINMENT INDUSTRY |
| FAA 3900.69 : 2016 | FLIGHT STANDARDS SERVICE AIRCRAFT ACCIDENT INVESTIGATION SAFETY PROGRAM |
| SSPC-TU 7 : 2015 | CONDUCTING AMBIENT AIR, SOIL, AND WATER SAMPLING OF SURFACE PREPARATION AND PAINT DISTURBANCE ACTIVITIES |
| MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| API 2200 REDLINE : 2010 | REPAIRING CRUDE OIL, LIQUEFIED PETROLEUM GAS, AND PRODUCT PIPELINES |
| API RP 2027 : 2002 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| ANSI/ASSE A10.27 : 1998 : R2005 | SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES |
| NFPA 56 (PS) : 2012 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| ANSI/ASSE A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| API 2027 : 2002 : R2012 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| ASTM F 1159 : 2016 : REDLINE | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ANSI/ASSE A10.22 : 2007 | SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS |
| ANSI/ASSE A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| ASTM E 2345 : 2004 | Standard Practice for Investigating Electrical Incidents (Withdrawn 2004) |
| IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| IEEE 45-5 : 2014 | ELECTRICAL INSTALLATIONS ON SHIPBOARD - SAFETY CONSIDERATIONS |
| PIP STS03001 : 2017 | PLAIN AND REINFORCED CONCRETE SPECIFICATION |
| PIP STS05130 : 2011 | STRUCTURAL AND MISCELLANEOUS STEEL ERECTION SPECIFICATION |
| PIP STC01015 : 2017 | STRUCTURAL DESIGN CRITERIA |
| ASME STP-SA-055 : 2012 | GUIDE TO MOBILE CRANE STANDARDS |
| PIP STE02465 : 2012 | AUGERED CAST-IN-PLACE PILES DESIGN GUIDE |
| PIP STS05120 : 2011 | STRUCTURAL AND MISCELLANEOUS STEEL FABRICATION SPECIFICATION |
| PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
| PIP CVS02100 : 2014 | SITE PREPARATION, EXCAVATION, AND BACKFILL SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.