CEN/TR 16741:2015
Current
The latest, up-to-date edition.
Textiles and textile products - Guidance on health and environmental issues related to chemical content of textile products intended for clothing, interior textiles and upholstery
08-12-2015
European foreword
Introduction
1 Scope
2 Terms and definitions
3 General recommendations
4 Specific criteria for textile products
5 Others
Annex A (informative) - Risk phrases
Annex B (informative) - Criteria for the identification
of persistent, bioaccumulative and toxic
substances, and very persistent and very
bioaccumulative substances
Bibliography
This Technical Report specifies environmental and health recommendations for textile products (including accessories) with direct skin contact and in the surroundings of the human body.
This Technical Report facilitates the understanding of chemicals with intended uses in the manufacturing of goods in the fields of textile products intended to clothing, interior textiles and upholstery, to comply with the European chemical regulations and recommendations in force in EU.
WARNING: This Technical Report is not intended to substitute the existing regulations. The reader is requested to check the current existing regulation.
By suggesting that the textile market follows the ethos of this Technical Report, and thereby avoiding products containing unwanted substances, human health and the environment are protected in producing, supplying and importing countries to EU.
The distinguishing properties of the chemicals and the processes in which they are used (intended use substances) or they occur (unintended release substances) are described in this technical report.
This Technical Report mentions, when relevant, the existing standardised test methods commonly in use, as well as, the related limit values which are generally accepted.
NOTE 1.When limit values are given, possible contamination by the external environment and inaccuracy in the measurement of very low concentration may be taken into consideration.
The listed substances of this Technical Report can be categorised in two: one related to intended use, another one related to unintended release.
NOTE 2.For filling material such as "feather & down", refer to CEN TC 222 and, for other material used in clothing such as leather, refer to CEN TC 309, for toys, refer to CEN TC 252.
Committee |
CEN/TC 248
|
DocumentType |
Technical Report
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
PD CEN/TR 16741:2015 | Identical |
FD CEN/TR 16741 : 2016 FD | Identical |
S.R. CEN/TR 16741:2015 | Identical |
I.S. EN 16780:2018 | Identical |
PNE-FprCEN/TR 16741 | Identical |
DIN EN ISO 8936:2015-09 (Draft) | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
PREN 17132 : DRAFT 2018 | TEXTILES AND TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCT MATERIALS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH), METHOD USING CHROMATOGRAPHIC TECHNIQUES |
PREN 16779 : DRAFT 2014 | TEXTILE CHILD CARE ARTICLES - SAFETY REQUIREMENTS AND TEST METHODS FOR CHILDREN'S COT DUVETS - PART 1: DUVET (EXCLUDING DUVET COVERS) |
BS EN ISO 8936:2017 | Awnings for leisure accommodation vehicles. Requirements and test methods |
15/30280950 DC : 0 | BS EN ISO 8936 - AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS |
18/30357042 DC : 0 | BS EN 17130 - TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFUMARATE (DMFU) IN TEXTILE PRODUCT MATERIALS |
ISO 8936:2017 | Awnings for leisure accommodation vehicles — Requirements and test methods |
14/30272157 DC : 0 | BS EN 16780 - TEXTILE CHILD CARE ARTICLES - SAFETY REQUIREMENTS AND TEST METHODS FOR CHILDREN'S COT BUMPERS |
I.S. EN ISO 8936:2017 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
18/30357793 DC : 0 | BS EN 17132 - TEXTILES AND TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCT MATERIALS - DETERMINATION OF POLYCYCLIC AROMATIC HYDROCARBONS (PAH), METHOD USING CHROMATOGRAPHIC TECHNIQUES |
PREN 16780 : DRAFT 2014 | TEXTILE CHILD CARE ARTICLES - SAFETY REQUIREMENTS AND TEST METHODS FOR CHILDREN'S COT BUMPERS |
EN ISO 8936:2017 | Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017) |
CEN Guide 16:2017 | Guide for addressing chemicals in standards for consumer-relevant products |
PREN 17130 : DRAFT 2018 | TEXTILE PRODUCTS - CRITICAL SUBSTANCES POTENTIALLY PRESENT IN COMPONENTS OF TEXTILE PRODUCTS - TEST METHOD TO QUANTITATIVELY DETERMINE DIMETHYLFUMARATE (DMFU) IN TEXTILE PRODUCT MATERIALS |
14/30272160 DC : 0 | BS EN 16781 - TEXTILE CHILD CARE ARTICLES - SAFETY REQUIREMENTS AND TEST METHODS FOR CHILDREN'S SLEEP BAGS |
DIN 54231:2005-11 | Textiles - Detection of disperse dyestuffs |
EN ISO 16373-2:2014 | Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) (ISO 16373-2:2014) |
ISO 14184-1:2011 | Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction method) |
ISO 16373-2:2014 | Textiles — Dyestuffs — Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) |
EN 14362-1:2012 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres |
UNI 11057 : 2003 | TEXTILES - CHEMICAL TESTS - DETERMINATION OF PENTACHLOROPHENOL - TETRACHLOROPHENOL AND THEIR SALTS AND ESTERS IN THE TEXTILES |
EN ISO 17075:2007 | Leather - Chemical tests - Determination of chromium(VI) content (ISO 17075:2007) |
ISO 14389:2014 | Textiles — Determination of the phthalate content — Tetrahydrofuran method |
ISO 105-E04:2013 | Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration |
ASTM E 1645 : 2016 : REDLINE | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ISO/TS 16186:2012 | Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials |
DIN 54233-1:2010-02 (Draft) | TESTING OF TEXTILES - DETERMINATION OF METALS - PART 1: DETERMINATION OF METALS USING MICROWAVE DIGESTION |
EN ISO 105-E04:2013 | Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) |
EN ISO 17353:2005 | Water quality - Determination of selected organotin compounds - Gas chromatographic method (ISO 17353:2004) |
EN 15777:2009 | Textiles - Test method for phthalates |
ISO/TS 16189:2013 | Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethylformamide in footwear materials |
DIN 54233-2:2014-07 | Testing of textiles - Determination of metals - Part 2: Determination of extractable metals by hydrochloric acid |
SAC GB 18401 : 2003 | NATIONAL GENERAL SAFETY TECHNICAL CODE FOR TEXTILE PRODUCTS |
ISO 5398-2:2009 | Leather Chemical determination of chromic oxide content Part 2: Quantification by colorimetric determination |
EN 62321:2009 | Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) |
EN ISO 17070:2015 | Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content (ISO 17070:2015) |
CEN ISO/TS 16189:2013 | Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO/TS 16189:2013) |
EN 1811:2011+A1:2015 | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
ISO/TS 16179:2012 | Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials |
ISO 5398-3:2007 | Leather Chemical determination of chromic oxide content Part 3: Quantification by atomic absorption spectrometry |
ISO 14184-2:2011 | Textiles Determination of formaldehyde Part 2: Released formaldehyde (vapour absorption method) |
CEN ISO/TS 16179:2012 | Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials (ISO/TS 16179:2012) |
ISO 3071:2005 | Textiles Determination of pH of aqueous extract |
XP G08 015 : 2000 XP | TEXTILES - DETERMINATION OF PENTACHLOROPHENOL |
EN 14602:2012 | Footwear - Test methods for the assessment of ecological criteria |
ISO 16373-3:2014 | Textiles — Dyestuffs — Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) |
CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS |
EN 16711-1:2015 | Textiles - Determination of metal content - Part 1: Determination of metals using microwave digestion |
ISO 17353:2004 | Water quality — Determination of selected organotin compounds — Gas chromatographic method |
CEN ISO/TS 16186:2012 | Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials (ISO/TS 16186:2012) |
CEN/TR 15917:2009 | Textiles - Cosmetotextiles |
CR 13695-1:2000 | Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging |
EN 16711-2:2015 | Textiles - Determination of metal content - Part 2: Determination of metals extracted by acidic artificial perspiration solution |
EN ISO 14184-2:2011 | Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) (ISO 14184-2:2011) |
EN ISO 16373-3:2014 | Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) (ISO 16373-3:2014) |
ISO 17075:2007 | Leather Chemical tests Determination of chromium(VI) content |
EN ISO 3071:2006 | Textiles - Determination of pH of aqueous extract (ISO 3071:2005) |
DIN 54233-4:2014-07 | Testing of textiles - Determination of metals - Part 4: Determination of extractable metals by synthetic salivary solution |
SAC GB/T 7573 : 2009 | TEXTILES - DETERMINATION OF PH OF AQUEOUS EXTRACT |
ISO 17070:2015 | Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content |
ISO 5398-4:2007 | Leather Chemical determination of chromic oxide content Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES) |
ISO 5398-1:2007 | Leather Chemical determination of chromic oxide content Part 1: Quantification by titration |
EN 1122:2001 | Plastics - Determination of cadmium - Wet decomposition method |
EN ISO 14184-1:2011 | Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011) |
EN 14362-3:2012 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.