CEN/TR 14819-2:2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations
03-07-2023
11-16-2005
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General recommendations
4.1 Application of this technical report
4.2 Safety principles
4.2.1 General
4.2.2 Hazard scenarios
4.2.3 Safety measures
5 Basic recommendations
6 Recommendations concerning fire prevention and
firefighting in carriers
6.1 Materials
6.2 Electrical cabinets
6.3 Cabling outside the electrical cabinets and lighting
6.4 Batteries
6.5 Battery chargers
6.6 Video equipment (camera, monitor)
6.7 Heating, air conditioning
6.8 Electrical components outside cabinets which are
energized during travel (dynamos, alternators, motors)
6.9 Pantographs
6.10 Rail brake - Retarder
6.11 Hydraulic power plants and circuits - Pressure vessels
- Refrigerants
6.12 Prohibition of smoking, open fires and the
transportation of flammable materials
6.13 Extinguishers and other means of firefighting
6.14 Capacity of carriers
6.15 Recovery measures in the event of a fire on board
a carrier
6.16 Emergency exits from carriers
7 Recommendations concerning fire prevention and
firefighting in the area of the line
7.1 Rails and overhead catenaries supplying auxiliary
electrical power to carriers
7.2 Transmission of electrical power along the track or
supported by line support structures
7.3 Remote communication cable between carrier and control
point
7.4 Transportation of flammable liquid along the funicular
railway track
7.5 Track or route of line
8 Recommendations concerning fire prevention and firefighting
in stations
8.1 General
8.2 Platform materials
8.3 Maintenance pit beneath carriers at the platform
8.4 Space adjacent to the platforms
8.5 Transmission of electrical power
8.6 Contacts for recharging the carrier batteries
8.7 Video equipment (camera, monitor)
8.8 Dispensing machines for use by passengers and other
platform furniture
8.9 Prohibition of smoking, open fires and the
transportation of flammable materials
8.10 Extinguishers
8.11 Smoke detection and clearing
9 Recommendations concerning fire prevention and firefighting
in the machine room and electrical power system spaces
9.1 Prevention
9.2 Limitation of spread of fire
10 Recommendations concerning fire prevention and firefighting
in electrical supply spaces
11 Recommendations concerning fire prevention and firefighting
in the control room
11.1 Civil engineering
11.2 Spaces adjacent to the control point
11.3 Electrical equipment
11.4 Video monitors
11.5 Space heating
11.6 Domestic utensils
11.7 Furniture
11.8 Putting safety devices out of service
11.9 Personnel
12 Lightning
13 Training of personnel
14 Maintenance
Bibliography
This part of the technical report specifies safety recommendations applicable to the prevention and fighting offires in funicular railways not in tunnels, aerial ropeways and ski-tows that may endanger the health and safetyof persons.With regard to funicular railways, these recommendations are applicable to those not running in a tunnel andhaving a pathway alongside the track that does not allow passengers to exit the carrier in less than 5 min. Forfunicular railways where evacuation of the carrier can be completed within 5 min, the same recommendationsmay be applied in part according to the results of the safety analysis of the installation.With regard to these problems of fire, it is essential to take organizational measures relating to operation, butthese are not covered in this report.Requirements for aerial ropeways operating in a tunnel may also be based on CEN/TR 14819-1.
Committee |
CEN/TC 242
|
DocumentType |
Technical Report
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
UNI CEN/TR 14819-2 : 2006 | Identical |
PD CEN/TR 14819-2:2005 | Identical |
I.S. CEN TR 14819-2:2006 | Identical |
13/30277122 DC : 0 | BS EN 12929-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
PREN 12929-1 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 1: REQUIREMENTS FOR ALL INSTALLATIONS |
EN 25923:1993 | Fire protection - Fire extinguishing media - Carbon dioxide (ISO 5923:1989) |
EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
ENV 1992-1-2 : DRAFT 95 COR 96 | EUROCODE 2 - DESIGN OF CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
ENV 13381-4:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members |
EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
EN 13796-2:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 2: Slipping resistance tests for grips |
ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
ENV 13381-2:2002 | Test methods for determining the contribution to the fire resistance of stuctural members - Part 2: Vertical protective membranes |
PREN 45545-3 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
EN 50290-2-27 : 2002 COR 2010 | COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
PREN 45545-4 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
EN 671-2:2012 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
EN 50122-2:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS |
EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 671-1:2012 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
ISO 13943:2017 | Fire safety — Vocabulary |
EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
ENV 1994-1-2 : 94 AC 95 | EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
EN 50206-2:2010 | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
PREN 45545-6 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
EN 50264-1:2008 | Railway applications - Railway rolling stock power and control cables having special fire performance - Part 1: General requirements |
PREN 45545-1 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
ENV 13381-3:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members |
PREN 45545-2 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
ISO 11925-3:1997 | Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
EN 3-7:2004+A1:2007 | Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
ENV 1996-1-2 : 1995 | EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 671-3:2009 | Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose |
EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
EN 13501-3:2005+A1:2009 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
ENV 1991-1-2 : 1995 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-2: GENERAL RULES: STRUCTURAL FIRE DESIGN |
EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
EN 13796-3:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue testing |
EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
EN 14135:2004 | Coverings - Determination of fire protection ability |
ENV 1999-1-2 : 1998 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 12927-8:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
ENV 13381-7:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members |
ENV 1993-1-2 : DRAFT 95 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
ENV 13381-5:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
PREN 45545-7 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
ENV 1995-1-2 : DRAFT 94 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
ENV 13381-6:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.