CEN Guide 4:2008
Current
Current
The latest, up-to-date edition.
GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
Published date
11-01-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Terms and definitions
3 Basic principles and approaches
3.1 General
3.2 Principles
3.3 Approaches
4 Environmental aspects to be considered for systematically
addressing environmental issues in product standards
4.1 General considerations
4.2 Inputs
4.3 Outputs
4.4 Other relevant issues
5 Identifying product environmental aspects using a systematic
approach
5.1 General
5.2 Collecting data for the identification of product
environmental aspects and impacts
5.3 Environmental checklist
5.4 Relation between the environmental checklist and the
drafting guidance
6 Guidance for integrating environmental provisions in the
product standard
6.1 General
6.2 Acquisition
6.3 Production
6.4 Use of the product
6.5 End-of-life
6.6 Transportation
Annex A (informative) - Developing environmental sector guides
Annex B (informative) - Examples for including environmental
provisions in standards
Bibliography
This Guide provides guidance on addressing environmental issues in product standards.
| DocumentType |
Guide
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| PKN CEN/GUIDE 4 : 2007 | Identical |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 14154-4:2014 | WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| S.R. CEN/TR 16470:2013 | ENVIRONMENTAL ASPECTS OF DUCTILE IRON PIPE SYSTEMS FOR WATER AND SEWERAGE APPLICATIONS |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| CEN/TR 15353:2007 | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
| CEN/TR 16928:2016 | Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEN Guide 15:2012 | Guidance document for the development of service standards |
| 13/30274904 DC : 0 | BS EN 14154-4 - WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| DIN EN 14154-4:2015-02 | Water meters - Part 4: Additional functionalities |
| PREN 14382 : DRAFT 2016 | GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| I.S. EN 16314:2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| CEN/TR 16470:2013 | Environmental aspects of ductile iron pipe systems for water and sewerage applications |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 16/30334287 DC : 0 | BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
| I.S. EN 15530:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - ENVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| CEN/CLC Guide 32:2016 | Guide for addressing climate change adaptation in standards |
| DIN EN 15347:2008-02 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 14154-4:2014 | Water meters Additional functionalities |
| BS EN 16582-1:2015 | Domestic swimming pools General requirements including safety and test methods |
| UNI EN 15347 : 2008 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 16582-1:2015 | DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS |
| PREN 16985 : DRAFT 2016 | SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN 16314:2013 | Gas meters. Additional functionalities |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 15530:2008 | Aluminium and aluminium alloys. Environmental aspects of aluminium products. General guidelines for their inclusion in standards |
| ISO Guide 64:2008 | Guide for addressing environmental issues in product standards |
| S.R. CEN/TR 16928:2016 | GUIDANCE FOR THE IMPLEMENTATION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS AND SYSTEM STANDARDS IN THE FIELD OF WASTEWATER ENGINEERING |
| UNI EN 15530 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EVIRONMENTAL ASPECTS OF ALUMINIUM PRODUCTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS |
| UNI 11558 : 2014 | PROPERTY VALUER - REQUIREMENTS OF KNOWLEDGE, SKILLS AND COMPETENCE |
| 16/30334290 DC : 0 | BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
| 16/30335146 DC : 0 | BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS |
| EN 15530:2008 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 16314:2013 | Gas meters - Additional functionalities |
| EN 14154-4:2014 | Water meters - Part 4: Additional functionalities |
| UNE-EN 16314:2014 | Gas meters - Additional functionalities |
| PD CEN/TR 16470:2013 | Environmental aspects of ductile iron pipe systems for water and sewerage applications |
| UNE-EN 14154-4:2015 | Water meters - Part 4: Additional functionalities |
| 07/30156704 DC : DRAFT DEC 2007 | BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS |
| DIN EN 15530:2008-06 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
| EN 16582-1:2015 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| DIN EN 16314:2013-09 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| UNI EN 16314 : 2013 | GAS METERS - ADDITIONAL FUNCTIONALITIES |
| DIN EN 16582-1:2015-11 | Domestic swimming pools - Part 1: General requirements including safety and test methods |
| S.R. CEN TR 15353:2007 | PLASTICS - RECYCLED PLASTICS - GUIDELINES FOR THE DEVELOPMENT OF STANDARDS FOR RECYCLED PLASTICS |
| UNI EN 14154-4 : 2015 | WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| IEC GUIDE 109:2012 | Environmental aspects - Inclusion in electrotechnical product standards |
| DIN-Fachbericht 108:2003 | GUIDE FOR THE INCLUSION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDIZATION AND DEVELOPMENT |
| ISO 17422:2002 | Plastics Environmental aspects General guidelines for their inclusion in standards |
| EN 15039:2014 | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polycarboxilic acids and salts |
| EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
| EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
| ISO 23747:2015 | Anaesthetic and respiratory equipment Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans |
| ISO 14024:1999 | Environmental labels and declarations Type I environmental labelling Principles and procedures |
| EN 15342:2007 | Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates |
| ISO 14021:2016 | Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| EN 12975-1:2006+A1:2010 | Thermal solar systems and components - Solar collectors - Part 1: General requirements |
| EN 15312:2007+A1:2010 | Free access multi-sports equipment - Requirements, including safety and test methods |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| IEC 60836:2015 | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| ISO/TR 14062:2002 | Environmental management Integrating environmental aspects into product design and development |
| EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 14020:2000 | Environmental labels and declarations — General principles |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 15530:2008 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
| ISO 16201:2006 | Technical aids for persons with disability — Environmental control systems for daily living |
| EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
| EN 14717:2005 | Welding and allied processes - Environmental check list |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| ISO 14050:2009 | Environmental management Vocabulary |
| IEC GUIDE 114:2005 | Environmentally conscious design - Integrating environmental aspects into design and development of electrotechnical products |
| CEN/TS 14541:2013 | Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.