CEI EN 60871-1 : 2015
Current
The latest, up-to-date edition.
SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL
Hardcopy , PDF
English, English - Italian
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1. SCOPE
2. Normative references
3. Terms and definitions
4. Service conditions
5. Quality requirements and tests
6. Classification of tests
7. Capacitance measurement (routine test)
8. Measurement of the tangent of the loss angle
(tan [delta]) of the capacitor (routine test)
9. Voltage test between terminals (routine test)
10. AC voltage test between terminals and
container (routine test)
11. Test of internal discharge device (routine test)
12. Sealing test (routine test)
13. Thermal stability test (type test)
14. Measurement of the tangent of the loss angle
(tan [delta]) of the capacitor at elevated
temperature (type test)
15. AC voltage test between terminals and
container (type test)
16. Lightning impulse test between terminals and
container (type test)
17. Short-circuit discharge test (type test)
18. Insulation levels
19. Overloads - Maximum permissible voltage
20. Overloads - Maximum permissible current
21. Safety requirements for discharge devices
22. Safety requirements for container connections
23. Safety requirements for protection of the environment
24. Other safety requirements
25. Markings of the capacitor unit
26. Markings of the capacitor bank
27. Guide for installation and operation
Annex A (normative) - Precautions to be taken to
avoid pollution of the environment by
polychlorinated biphenyls
Annex B (normative) - Additional definitions,
requirements and tests for power filter
Capacitors
Annex C (normative) - Test requirements and
application guide for external fuses and
units to be externally fused
Annex D (informative) - Formulae for capacitors and
installations
Annex E (informative) - Capacitor bank fusing and unit
arrangement
Bibliography
Annex ZA (normative) - Normative references to
international publications
with their corresponding
European publications
Describes the capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1000 V and frequencies of 15 Hz to 60 Hz.
| Committee |
CT 33
|
| DevelopmentNote |
Classificazione CEI 33-18 (09/2001) Partially supersedes CEI 33-7 (05/2004)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
Comitato Elettrotecnico Italiano
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| IEC 60871-1:2014 | Identical |
| EN 60871-1:2014 | Identical |
| IEC 60871-4:2014 | Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4: Internal fuses |
| IEC 61048:2006+AMD1:2015 CSV | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 60549:2013 | High-voltage fuses for the external protection of shunt capacitors |
| IEEE 1036-2010 | IEEE Guide for the Application of Shunt Power Capacitors |
| IEC 61049:1991 | Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements |
| IEC 61270-1:1996 | Capacitors for microwave ovens - Part 1: General |
| IEC 60273:1990 | Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V |
| EN 60071-1:2006/A1:2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| IEC 60931-3:1996 | Shunt capacitors of the non-self-healing type for AC power systems having a rated voltage up to and including 1000 V - Part 3: Internal fuses |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| IEC 60050-436:1990 | International Electrotechnical Vocabulary (IEV) - Part 436: Power capacitors |
| EN 60071-2:1997 | Insulation co-ordination - Part 2: Application guide |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| CEI 42-4 : 1997 | TECNICHE DI PROVA AD ALTA TENSIONE - PARTE 1: DEFINIZIONI E PRESCRIZIONI GENERALI RELATIVE ALLE PROVE |
| EN 60871-4:2014 | Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4: Internal fuses |
| IEEE 18-2012 | IEEE Standard for Shunt Power Capacitors |
| IEC 60110-1:1998 | Power capacitors for induction heating installations - Part 1: General |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.