CEI EN 60335-2-69 : 2014
Current
The latest, up-to-date edition.
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
Hardcopy , PDF
English - Italian
01-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
INTRODUCTION
1. Scope
2. Normative references
3. Terms and definitions
4. General requirement
5. General conditions for the tests
6. Classification
7. Marking and instructions
8. Protection against access to live parts
9. Starting of motor-operated appliances
10. Power input and current
11. Heating
12. Void
13. Leakage current and dielectric strength at
operating temperature
14. Transient overvoltages
15. Moisture resistance
16. Leakage current and electric strength
17. Overload protection of transformers and
associated circuits
18. Endurance
19. Abnormal operation
20. Stability and mechanical hazards
21. Mechanical strength
22. Construction
23. Internal wiring
24. Components
25. Supply connection and external flexible cords
26. Terminals for external conductors
27. Provision for earthing
28. Screws and connections
29. Clearances, creepage distances and solid
insulation
30. Resistance to heat and fire
31. Resistance to rusting
32. Radiation, toxicity and similar hazards
Annexes
Annex A (normative) - Routine tests
Annex AA (informative) - Emission of acoustical noise
Annex BB (informative) - Emission of vibration
Annex CC (informative) - Particular requirements for
vacuum cleaners and dust extractors for the
collection of dusts which present an explosion risk
Annex DD (normative) - Particular requirements for
vacuum cleaners for use in ESD protected areas
Annex EE (informative) - Emission of acoustical noise
Annex FF (informative) - Emission of vibration
Annex ZA (normative) - Special national conditions
Annex ZC (normative) - Normative references to
international publications with their corresponding
European publications
Annex ZE (informative) - Specific additional requirements
for appliances and machines intended for
commercial use
Annex ZZ (informative) - Coverage of Essential Requirements
of EU Directive 2006/42/EC
Bibliography
Describes the safety of electrical motor-operated Vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments.
| Committee |
CT 59/61
|
| DevelopmentNote |
Classificazione CEI 61-215. (08/2001) To be used in conjunction with CEI EN 60335-1. (06/2005)
|
| DocumentType |
Standard
|
| Pages |
152
|
| PublisherName |
Comitato Elettrotecnico Italiano
|
| Status |
Current
|
| Standards | Relationship |
| EN 60335-2-69:2012 | Identical |
| VDI 3890:2016-03 | Emission control - Pet cremation facilities |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| EN 60335-2-68:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012, MODIFIED) |
| IEC 60335-2-67:2012+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse |
| IEC 60335-2-100:2002 | Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| IEC 60335-2-72:2016 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN 60335-2-67:2012 | Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| IEC 60335-2-2:2009+AMD1:2012+AMD2:2016 CSV | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES |
| EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 11428:1996 | Ergonomics Visual danger signals General requirements, design and testing |
| EN 60335-2-72:2012 | Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
| EN ISO 9614-2:1996 | Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996) |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| ISO 3864-1:2011 | Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| IEC 60312-1:2010+AMD1:2011 CSV | Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| EN 60335-2-2:2010/A1:2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER-SUCTION CLEANING APPLIANCES (IEC 60335-2-2:2009/A1:2012) |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| IEC 60335-2-68:2012+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 6344-2:1998 | Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220 |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.